seca 233 Measuring Rod User Manual
- June 3, 2024
- seca
Table of Contents
seca 233 Measuring Rod
Scope of supply
Assembly instructions
Congratulations
- In the seca 233 measuring rod, you have acquired an accurate and at the same time sturdy piece of equipment for measuring the length of babies.
- The measuring rod serves both to determine the length at birth of a newborn and to check body length during the growth process.
- It is attached to the following seca baby scales using the assembly material supplied: model 374, 376 and 378.
- When combined with a scale, the measuring rod serves as a complete measuring station. The measuring rod is manufactured from stable, easy-care aluminium profile. The head and foot supports supplied make measuring convenient and safe.
- The seca 233 measuring rod with a seca baby scale are for use in hospitals and doctors’ surgeries.
Safety
Before using the new measuring rod, please take a little time to read the following saftey instructions:
-
Follow the operating instructions.
-
Attach the measuring rod only to the seca baby scales listed above.
-
Use only the assembly material supplied.
-
When assembling, ensure that screws are tight and that the rod has been as-sembled correctly (see chapter entitled “Assembly instructions”).
-
The measuring rod is not a handle.
Always take hold of the scale itself if you want to move it. -
When moving the measuring rod, make sure that the baby’s hands or feet do not get caught.
-
Ensure that the measuring rod and scale are cleaned and disinfected regularly to prevent infectious diseases being trans-mitted.
-
A second person is ideally required to en-able length to be measured exactly.
Assembly instructions
Note: the measuring rod is fitted to the tray in elongated holes to allow the measuring rod to be adjusted exactly and unavoidable production tolerances to be compensated. Place a known reference measure between the head and foot stops and move the bracket on the tray so that the correct length is displayed. In general, however, it is suf-ficient to fit the rod centrally in the elongated holes.
Operating instructions
WARNING: Injury to the baby from a fall. Baby scales are usually placed on elevated work surfaces. If the baby falls from this work surface, he or she may sustain severe, irreversible or fatal injuries.
- Never leave a baby on the scale unsupervised.
How to measure properly
- Place the baby on the weighing tray. The baby’s head must be positioned at the head stop (1) of the tray.
- Use your right hand to move the foot support (2) towards the baby’s feet. Rest the baby’s feet on the foot support while doing so. With your left hand keep the baby still on the weighing tray.
- Use your left hand to gently press the baby’s knees down towards the weighing tray. With the right hand, push the foot support (2) up to the soles of the baby’s feet.
- Read off the length of the baby from the marking on the measuring rule guide (3).
Cleaning
Clean the measuring rod as required using a household cleaner or commercial disinfec-tant, e.g. 70% isopropanol.
Technical data
- Measurement range: 350-800 mm / 14-32 inches
- Graduations: 1 mm / 1/8 inch
- Accuracy: greater than +_ 5 mm
Dimensions
- (W x H x D): 641 mm x 179 mm x 296 mm
- Weight: approx. 700 g
- Temperature range: +10 °C to +40 °C
- Directive 93/42/EEC: Class I with measuring function
Disposal
Should the measuring rod no longer be able to be used, the responsible waste
disposal association will be glad to give you infor- mation about the measures
necessary to dispose of it properly.
Warranty
A two-year warranty from date of delivery applies to defects attributable to poor mate-rials or workmanship. All moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Defects which come under warranty will be made good for the customer at no charge on production of the receipt. No further claims can be enter-tained. The costs of transport in both direc-tions will be borne by the customer should the equipment be located anywhere other than the customer’s premises. In the event of transport damage, claims under warranty can be honoured only if the complete original packaging was used for any transport and the merchandise secured and attached in that packaging just as it was when originally packed. All the packaging should therefore be retained.
A claim under warranty will not be honoured if the equipment is opened by persons not expressly authorised by seca to do so. We would ask our customers abroad to contact their local sales agent in the event of a warranty matter.
Declaration of conformity: seca gmbh & co. kg hereby declares that the product meets the terms of the applicable European directives. The unabridged decla-ration of conformity can be found at: www.seca.com.
Germany
ADDRESS: Medical Measuring Systems and Scales since 1840 seca gmbh & co. kg
Hammer Steindamm 3-25 22089 Hamburg ·
Telephone +49 40 20 00 00 0
Fax +49 40 20 00 00 50
info@seca.com
All contact data under www.seca.com
References
- MODA - An eclectic lifestyle boutique located in Venice – MODA Venice
- Medical measurement systems and scales · seca
- Medical measurement systems and scales · seca
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>