dynamic BIOSENSORS 10X BUFFER TE40 PH 7.4 Running Buffer User Manual
- August 27, 2024
- dynamic BIOSENSORS
Table of Contents
dynamic BIOSENSORS 10X BUFFER TE40 PH 7.4 Running Buffer
Product Information
Specifications:
- Product Name: heliX+
- Order Number: BU-TE-40-10
- Composition: 10x Buffer TE40 pH 7.4
- Amount: 50 mL
- Storage: For research use only. Limited shelf life – check expiry date on label.
Product Usage Instructions
Product Description
Order Number: BU-TE-40-10
For research use only.
This product has a limited shelf life, please see expiry date on label.
Preparation
- Dilute the complete solution 10x Buffer TE40 pH 7.4 (50 mL) by mixing with 450 mL ultrapure water.
- After dilution TE40 Buffer is ready for use (10 mM Tris, 40 mM NaCl, 50 µM EDTA, 50 µM EGTA and 0.05 % Tween20).
- The diluted buffer should be stored at 2-8°C.
Usage:
- Before using, gently mix the buffer solution.
- Dilute the buffer solution to the desired concentration if needed.
- Use the buffer as a running buffer for your experiments at pH 7.4.
Storage:
Store the product in the recommended conditions to maintain its shelf life.
Contact
- Dynamic Biosensors GmbH: Perchtinger Str. 8/10 81379 Munich Germany
- Dynamic Biosensors, Inc: 300 Trade Center, Suite 1400 Woburn, MA 01801 USA
- Order Information order@dynamic-biosensors.com
- Technical Support support@dynamic-biosensors.com
- www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
FAQ
Q: Can I use the buffer solution for applications other than research?
A: This product is designed for research purposes only and should not be used
for other applications.
Q: How should I dispose of any unused buffer solution?
A: Follow local regulations for disposing of chemical solutions. Do not pour
it down the drain.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>