DAYBETTER T028 Floor Lamp User Manual

August 28, 2024
DAYBETTER

DAYBETTER T028 Floor Lamp

Package

Installation

Step 1 :

Connecting the lamp pole and lamp base:
Insert the connected light pole into the base and secure it with screws.

Connect the cable
Straighten the silicone lamp strip. Connect the cable on the silicone
light strip to the cable at the lamp base port.

Press the silicone lamp strip into the lamp pole:
As shown in the picture, press the silicone strip from the middle outward to both ends until it is fully pressed into the lamp pole.

Connect the adapter to the cable of the lamp base and plug the adapter into the socket, then you can use the floor lamp.

Pairing Your Lamp with Daybetter App

What you need:
A Wi-Fi router supporting the 2.4GHz. 5GHz is not supported.

  1. Download the “Daybetter” app from the App Store(ios devices) or Google Play(Android devices).
  2. Enable Bluetooth or WiFi on your smartphone.
  3. Open the app, tap the”+” icon in the top right corner, and search the device.
  4. Tap the device icon and follow the onscreen instructions to complete pairing.

Safety Instructions

Read and follow al l the safety instructions:

  • The light is noaterproof. Avoid exposing it to splashes or water drops.
  • The operating temperature should be withi 10 °C to 40 °C (14° to 104°F)
  • The floor lamp intenlalight source is unchangable. If it breaks, the entire light must be replaced.
  • External dimmers cannot be used with this product.
  • Avoid installing tewnlight near heat sources or in damp locations.
  • Do not allow children to assemble lamp by themselves.
  • Avoid installing tHamp near heat sources or in damp locations.
  • Avoid installing themp near potentially dangerous light sorces (e.g. candles, liquid-filled objects).

Troubleshooting

The silicone light strip is too long.

  • Take out the strip from the pole.
  • Follow step 4 to reinstall.

Note: To avoid deforming the silicone light strip, please press from the top and bottom first, and then press the middle.
Caution Do NOT cut the strip short! It will be damaged.

After installing all the poles, the gap between them is large or they are skewed.

  • Remove the screws and connecting pieces.
  • Follow step 1 to step 2 to reinstall.
  1. Cannot connect the lamp to DayBetter.
    Check whether the lamp is powered on.

    • Check whether your smart phone Wi-Fi is enabled. Please make sure Wi-Fi connected to your phone is 2.4GHz (5GHz is not supported).
    • Make sure your smartphone is close to the device when connecting for the first time.
    • Check if you have entered the correct Wi-Fi password during Wi-Fi setup.
    • Make sure the distance between the light and router is less than 30ft.
    • Check whether the home network is stable by connecting lamp to another phone’s hotspot.
  2. The lamp lost connection.

    • Check whether the device is powered on.
    • Check whether your home network is stable.
    • Check if there are too many devices connected to the router by connecting lamp to another phone’s hotspot.
    • Ensure the distance between the smartphone and the device does not exceed 10ft.
    • Delete light connected in “My Devices” and reconnect the light to Wi-Fi following on-screen instructions.
  3. What is the maximum number of devices I can connect via Bluetooth?
    You can add up to 4 lights to a Bluetooth device group.
    However, you can add more devices to a WiFi group instead.

  4. Can I use group control with voice control?
    Yes. First, make sure all devices are connected to WiFi. Then link your DayBetter account to Alexa/Google Home. Finally, set group control on Alexa/Google Home APP.

Contact us
If you have any questions or product issues, please contact seller via the email on the package or get the product support on the order page in your purchasing account. All messages will be replied within 24 hours.

Information to User

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Important : Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals