DAYBETTER FLSL50329RGBDBUS LED Strip Lights User Manual

June 16, 2024
DAYBETTER

LED Strip Lights
User Manual

How to Connect?

Stept: Connect LED Controller with LED Light Strip.DAYBETTER
FLSL50329RGBDBUS LED Strip Lights - ConnectStep2: Connect the LED Controller with power supply.DAYBETTER
FLSL50329RGBDBUS LED Strip Lights - Connect 1Step3: Plug in the power supply.DAYBETTER FLSL50329RGBDBUS LED
Strip Lights - Connect 2

Power-on Test

Before You Install

  1. Unpack the box and check all iterns included.
  2. Power on the strip light and check whether it lights up.
    Caution: Do NOT power on before unrolt the strip light.DAYBETTER
FLSL50329RGBDBUS LED Strip Lights - Power

How to Install?

  1. Stick on the smooth, dry, clean surface.DAYBETTER FLSL50329RGBDBUS LED Strip Lights - Install

  2. Any rough and dusty surface can not be sticked.DAYBETTER FLSL50329RGBDBUS LED Strip Lights - Install 1

  3. Clean the surface, dry out and stick it.DAYBETTER FLSL50329RGBDBUS LED Strip Lights - Install 2

  4. Press the whole strip light repeatedly with force on BLANK area.
    Do NOT press components.DAYBETTER FLSL50329RGBDBUS LED Strip Lights -
Install 3

  5. Place the strip lights in the right way.
    (The strip lights can not be headed down.)DAYBETTER FLSL50329RGBDBUS LED
Strip Lights - Install 5

When it is necessary to bend, please try to avoid electronic components like light beads and IC and pads on the strip light, so as not to damage the strip light.
Recommended Tip: Try to bend with a bigger radian to protect the strip light and electronic components on it.![DAYBETTER FLSL50329RGBDBUS LED Strip Lights

Pairing Instructions

  1. Download “DayBetter” APP and install on your phone.
  2. Turn on the Bluetooth on your phone.
  3. Open the APP, tap the “+” icon in the top right corner and search new device.
  4. APP will show the device found, just add it.
  5. Tap the device icon to enter control panel.

Remote

| Power on and off
---|---
| Brightness up and down
| Play and pause
| Seven basic static color
| Long press “White” till blink then press brightness up/down to change pixel num
| Auto mode cycling
| Speed up and down
| Mode up and down
| Long press to save current mode. Short press to activate
| Directions switch
| Music Sync mode switch

Tips and Cautions

》Use the product with provided power adapter and control box only.
》Unroll the strip light before powering on.
》Do power on test before installation.
》Pull out the transparent sheet from IR remote before use.
》Be cautious of static electricity during installation and usage.
》Do not press the light bead and IC on the strip. Press the blank area to stick.
》Do not bend over the strip much, otherwise bead/IC may be damaged.
》Do not attach the strip to metal surface to avoid short circuit, even with film on surface .
》Remove nails, metal, or other conductive objects from the installation surface
before attaching the strip light, as it may cause short circuit.
》Do NOT allow children to install the strip light alone.
》Please turn off the power and unplug the adapter when the strip light will not be used for a long time.
》Please do NOT use this product outdoor or in humid place.
It is NOT waterproof.
》Keep the product away from sharp objects or strong corrosive chemicals.
》Please do NOT connect more strip to the product which will cause the power adapter overload.
》Adjust mic sensitivity and the distance between sound source and phone/device mic in Music Mode to get best music sync effect.
》 Please contact us if you have any problem or get a defective product.
We will reply within 24 hours.

Troubleshooting

a) APP can not find the device.

  • Make sure the phone bluetooth is on.

  • Allow the permissions of APP. APP needs them to connect the device.

  • Check the strip light is on. Or use remote control to check light is working.

  • Kill APP, turn off bluetooth and turn on bluetooth again, then start APP

  • Ensure phone within 4ft of product without obstructions when connecting. to add device again.

  • Your phone may be incompatible with the APP, try another phone.
    b) All lights don’t work.

  • Check power is on.

  • Press ON and press “brightness up” multi times on remote.

  • Connect APP and turn on light and turn up brightness.

  • Reinstall all parts.
    c) Some light beads keep off or fail working.

  • Contact our support team.

Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email:Servicevvip1@outlook.com
Please contact us if you have any problem or get a defective product.
We will reply within 24 hours.

v1.1
Email:Servicevvip1@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals