DAYBETTER RGB Smart IC COB LED Strip Light User Manual
- June 17, 2024
- DAYBETTER
Table of Contents
DAYBETTER RGB Smart IC COB LED Strip Light
How to Connect?
Step1 : Connect LED Controller with LED Light Strip.
Step2: Connect the LED Controller with power supply.
Step2: plug in the power supply.
Power-on Test
Before You Install
- Unpack the box and check all items included.
Caution: Do NOT power on before unrolling the strip light.
How to Install?
-
Stick on the smooth, dry, clean surface.
-
Any rough and dusty surface can not be stocked.
-
Clean the surface, dry out and stick it.
-
Place the strip lights in the right way. (The strip lights can not be headed down.)
Recommended Tip: Try to bend with a bigger radian to protect the strip light and electronic components on it.
Wrong Demonstration
Pairing Instructions
- Download “Day Better” APP and instar on your phone.
- Turn on the Bluetooth on your phone .
- Open the APP, tap the “+” icon in the top right corner and search new device.
- APP will display the device found. Just add it.
- Tap the device icon to enter control panel.
Remote
| Power on and off
---|---
| Brightness up and down
| Play and pause
| Seven basic static color
| Long press “White” till blink then press brightness up/down to change pixel
num
| Auto mode cycling
| Speed up and down
| Mode up and down
| Long press to save current mode. Short press to activate
| Directions switch
| Music Sync mode switch
Tips and Cautions
》Use the product with the provided power adapter and control box only.
》Unroll the strip light before powering on.
》Do power on test before installation.
》Pull out the transparent sheet from IR remote before using.
》Be cautious of static electricity during installation and usage.
》Do not attach the strip to metal surface to avoid short circuit, even with
film on surface .
》Remove nails, metal, or other conductive objects from the installation
surface before attaching the strip light, as it may cause short circuit.
》Do NOT allow children to install the strip light alone.
》 light will not be used for a long time.
》Please do NOT use this product outdoor or in a humid atmosphere. It is NOT
waterproof.
》Keep the product away from sharp objects or strong corrosive chemicals.
》Please do NOT connect more strip to the product which will cause the power
adapter overloaded.
》Adjust mic sensitivity and the distance between sound source and phone/device
mic in Music Mode to get best music sync effect.
》Please contact us if you have any problem or get a defective product.
We will reply within 24 hours.
Troubleshooting
a) APP can not find the device.
Make sure the phone bluetooth is on.
Allow the permissions of APP. APP needs them to connect the device.
Check whether the strip light is working. Or use remote control to check
whether the light is working.
Close APP, turn off bluetooth and turn on bluetooth again, then start APP to
add device again. Ensure the phone is within 1m/3.28ft of the product without
obstructions when connecting. Your phone may be incompatible with the APP. Try
another phone.
b) All lights don’t work.
Check whether power is on.
Press ON and press “brightness up” multi times on remote.
Connect APP and turn on light and turn up brightness.
Reinstall all parts.
c) Some light beads keep off or fail working.
Contact our support team.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Please contact us if you have any problem or get a defective product.
We will reply within 24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>