dynamic BIOSENSORS SOL-PAS-1-5 v2.1 10X Passivation Solution User Manual
- August 28, 2024
- dynamic BIOSENSORS
Table of Contents
dynamic BIOSENSORS SOL-PAS-1-5 v2.1 10X Passivation Solution
Specifications
- Product Name: heliX+ 10X PASSIVATION SOLUTION
- Description: Chip surface passivation solution with thiol-reactive compound
- Order Number: SOL-PAS-1-5
- Contents: 5 x 1 mL
- Storage: Cap Yellow, Store according to the expiry date on the label
Product Usage Instructions
- Preparation: Dilute 10x Passivation solution with ultrapure water by mixing 1 mL of the solution with 9 mL of ultrapure water.
- Regeneration: For regeneration of chip surface with 2 detection spots, use Order Number ADP-48-2-0 SOL-REG-1-5
Product Description
Order Number: SOL-PAS-1-5
Table 1. Contents and Storage Information
- For research use only.
- This product has a limited shelf life, please see expiry date on label.
Preparation
- Dilute 10x Passivation solution with ultrapure water by mixing the complete solution (1 mL) with 9 mL ultrapure water.
- The diluted solution should be stored at 2-8°C and can be used for 2 weeks.
Useful Order Numbers
Table 2. Order Numbers
Contact
- Dynamic Biosensors GmbH
- Perchtinger Str. 8/10
- 81379 Munich
- Germany
Dynamic Biosensors, Inc.
- 300 Trade Center, Suite 1400
- Woburn, MA 01801
- USA
Order Information order@dynamic-biosensors.com
Technical Support support@dynamic-biosensors.com
www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
Contact Information
- Dynamic Biosensors GmbH: Perchtinger Str. 8/10, 81379 Munich, Germany
- Dynamic Biosensors, Inc.: 300 Trade Center, Suite 1400, Woburn, MA 01801, USA
- Order Information: order@dynamic-biosensors.com
- Technical Support: support@dynamic-biosensors.com
- Website: www.dynamic-biosensors.com
FAQ
- Q: Can this solution be used for any other purpose?
- A: No, this solution is specifically designed for chip surface passivation with a thiol-reactive compound.
- Q: Is it safe to store the solution after dilution?
- A: It is recommended to use the solution immediately after preparation for best results. Discard any unused diluted solution.
- Q: Can I reuse the same chip multiple times with this solution?
- A: For best results, it is recommended to follow the regeneration instructions provided in the manual for reusing the chip surface.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>