dynamic BIOSENSORS heliX plus Regeneration Solution User Manual
- August 29, 2024
- dynamic BIOSENSORS
Table of Contents
dynamic BIOSENSORS heliX plus Regeneration Solution
Product Information
Specifications
- Product Name: heliX+ Regeneration Solution
- Order Number: SOL-REG-1-5
- Contents: 5 x 1 mL
- Color: Purple
- Intended Use: Chip surface regeneration
- Storage: Store in a cool, dry place away from direct sunlight
- Shelf Life: Limited shelf life, check expiry date on label
Product Usage Instructions
- Ensure the chip surface is clean and ready for regeneration.
- Take one vial of heliX+ Regeneration Solution from the pack.
- Open the vial carefully, avoiding contamination.
- Apply the solution evenly on the chip surface using an appropriate method.
- Allow the solution to act for the recommended time as per your application needs.
- Rinse the chip surface thoroughly with recommended solvent or buffer. Inspect the regenerated chip surface for desired results before further use.
Frequently Asked Questions (FAQ)
Q: What is the shelf life of heliX+ Regeneration Solution?
A: The product has a limited shelf life. Please check the expiry date on the
label before use.
Q: Can this solution be used for any type of chip surface?
A: The heliX+ Regeneration Solution is specifically designed for chip surface
regeneration and should be used as instructed.
Q: How should I store the product when not in use?
A: Store the solution in a cool, dry place away from direct sunlight to
maintain its efficacy.
REGENERATION SOLUTION
for chip surface regeneration
Dynamic Biosensors GmbH & Inc.
SOL-REG-1-5 v1.1
Product Description
Order Number: SOL-REG-1-5
Table 1. Contents and Storage Information
| Material | Cap | Amount | Storage |
|---|---|---|---|
| Regeneration Solution | Purple | 5 x 1 mL | 2-8°C |
For research use only.
This product has a limited shelf life, please see expiry date on label.
Useful Order Numbers
Table 2. Order Numbers
| Product Name | Comment | Order Number |
|---|---|---|
| heli X ® Adapter Chip | Chip with 2 detection spots | ADP-48-2-0 |
| 10x Passivation solution | For passivation of chip surface | SOL- |
PAS-1-5
Contact
Dynamic Biosensors GmbH
Perchtinger Str. 8/10
81379 Munich
Germany
Dynamic Biosensors, Inc.
300 Trade Center, Suite 1400
Woburn, MA 01801
USA
Order Information: order@dynamic-biosensors.com
Technical Support: support@dynamic-biosensors.com
Website: www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>