Pengcheng PX-05 Bluetooth Speaker Atmosphere Lamp User Manual

Pengcheng PX-05 Bluetooth Speaker Atmosphere Lamp

–

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved for uncontrolled environments
• Minimum Distance: 20cm between radiator and body
• RF Exposure Testing: Complies with FCC requirements in specified conditions

Product Usage Instructions

Installation :

1. Place the device on a stable surface.
2. Ensure there is a minimum distance of 20cm between the radiator of the device and your body.
3. Connect the necessary power source to the device.
4. Follow any additional setup instructions provided in the user manual.

Operation :

1. Turn on the device using the power button.
2. Follow the specific operating instructions for the desired function.
3. Monitor the device for any unusual behavior or interference.
4. Keep a safe distance of at least 20cm between yourself and the device during operation.

FAQ

• Q: What should I do if I experience interference while using the device?
  A: If you encounter interference, try adjusting the positioning of the device. Ensure there are no obstructions or other electronic devices causing the interference. If the issue persists, contact customer support for further assistance.

• Q: Can I modify the device for better performance?
  A: No, any changes or modifications to the device not approved by the manufacturer may void your warranty and could impact the device’s compliance with FCC regulations. It is recommended to use the device as intended by the manufacturer.

WIRELESS CHARGER+
BLUETOOTH SPEAKER·AMBIENT LIGHT·CLOCK

USER MANUAL
Please read the user manual carefully before using this product

PRODUCT FEATURES

• Delicate Design
• Wireless Charging
• Bluetooth Speaker
• Ambient Light
• Bedside Lamp
• Night Light
• Clock.

PRODUCT INTRODUCTION

1. Leather strap
2. Wireless Charging
3. Buttons
4.  Light
5. Digital Display
6. Ambient Light CD
7. Type-C Connector
8. Dual Speakers
9. Diaphragm

HOW TO CHARGE

Product charging

1.  Connect the US end of the data cable to the power adapter, and the other end to the product’s Type-C connector.
2. After the product is powered on, the DC icon on the display will glowing, indicating it is charging. When the DC icon on the display is put out, it indicates that it is fully charged
3. After plugging in the main power, place the wireless charging device in the charging indicator area of this product to start charging.

BLUETOOTH CONNECTION (Bluetooth Name: PCXC ZR01)

Bluetooth Pairing :

1. Long press the [11  B] button to reset the Bluetooth pairing. Successful Connection:
2. Then turn on the Bluetooth function of your mobile phone and click to select “PCXC-ZR01” from the list of Bluetooth devices. It will automatically enter pairing mode, and there will be a prompt sound and the Bluetooth icon on the digital display will stay on when the pairing is successful.

HOW TO USE THE BLUETOOTH SPEAKER

1. When playing music, (M) Press and hold the [ M] button, Bluetooth music indoor and outdoor style switching, power on default indoor music style.
2. Long press the [ ] button to play the previous track, short press to decrease the volume.
3. Short press the (11 BT] button to pause/play the music.
4.  Long press the [ ] button to play the next track, short press to increase the volume. A beeping sound will indicate when volume has reached its maximum.

AMBIENT LIGHT OPERATION

Light brightness adjustment

1.  Short press the [ ]button to cycle the brightness of the light through 10%-40%·60%·80%• 100%•off.
   Function mode adjustment

2.   Short press the[ M l button to cycle ‘through RGBW color modes of the ambient light. 

CLOCK ALARM OPERATION

Clock Alarm setting :

1. Short press the [ ] button to Clock Alarm setting, Adjust hours and minutes with[ ]Button and [ ]Button, Press the [ ]button to confirm that the setting is complete.
2. Press and hold the [ ] button Clock setting, Adjust hours and minutes with[4- K]Button and [&+>|]Button, Adjust the clock brightness:
3. Short press the [ ] button to adjust the clock brightness. Press and hold the [ p: ] button to turn the original alarm clock off and on.
   Press and hold the [ ] button to turn the original alarm clock off and on.
   

BUTTON FUNCTION

1. Power button
2. Light brightness button
3. Function mode button
4. Down button Play the pause button
5.  Up button
6. Clock setting button
7. Clock brightness button

 Power Button
Long press the Power Button to machine on and off.

( Light Brightness Button)
Short press the light brightness button to cycle the brightness of the light through 10%-40%-60%-80%-100%-off.)

M (Function Mode Button)

• Short press the function mode button to cycle through RGBW color modes of the ambient light.
• Press and hold the function mode button, Bluetooth music indoor and outdoor style switching, power on default indoor music style.

(Volume Down Button)

• Short press the volume down button to decrease the volume.
• Long press the volume down button to play the previous track.

( Pause pairing with Bluetooth Button)

• Short press the button to pause/play the music.
• Long press the button to reset Bluetooth pairing.

( Volume Up Button)

• Short press the volume up button to increase the volume,
• Long press the volume up button to play the next track,
• A beeping sound will Indicate when the volume has reached its maximum.

( Clock setting Button)

• Short press the button to Clock Alarm setting. Long press the button to Clock setting.
• Adjust hours and minutes with up Button and down Button.

(Clock brightness Button)

•  Short press the button to adjust the clock brightness.
• Long press the button to turn the original alarm clock off and on.

APPLICABLE EQUIPMENT

This product supports fast wireless charging and complies with the QI wireless charging standard; Through the magnetic induction should be short distance radio transmission, the equipment supports an compliant with the QI standard wireless charging devices .With protocol QC2.0/QC3.0/PD adapter, wireless charging supports 15W local, With over voltage anti over temperature protection.

ATTENTION POINTS

• To use wireless charging, make sure your phone has wireless charging capabilities.
• When the battery is low, it will beep and the ambient light will flash, suggesting charging.
• Use the QC3.0 adapter for best results.
• Please avoid thick cases (>0.07 inches) and other accessories when charging your device.
• Mobile phones below iPhone8 do not support wireless charging, such as iPhone5, 55, 6, 6S, and 7.
• Do not use or store the product in direct sunlight or high temperature places for a long time.
• Do not charge in places too close to magnetic cards, magnetic recording media, and precision instruments. • Do not disassemble or modify this product.
• Keep this product away from water or other liquids.

BASIC PARAMETER

• Model:PX-05
•  Silica/ PCBA/PC
• input: DC 5V/3A 9V/2A
• Power:18W
• Wireless Power.15W
• Speaker Power:Bw•2
• Product size:9.0×4.65JC3.62 inch
• Origin :Shenzhen China
• Charging port: Universal Type-C

PACKAGE

• Wireless Charging Music Lamp 1
• Power Adapter  1
• Power Cord 1
• User Manual  1

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different f rom that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>