ULINE Crowd Control Barrier Posts with Retractable Belt Instructions
- June 7, 2024
- ULINE
Table of Contents
ULINE Crowd Control Barrier Posts with Retractable Belt Instructions
TOOLS NEEDED
BELT CASSTITE REPLACEMENT INSTRUCTION
-
Loosen the four bottom screws securing the cassette into the post. (See Figure 1)
-
Slide the cassette out of the post. (See Figure 2)
-
Loosen the lower screws slightly on the replacement cassette, but do not remove them completely. (See Figure 3)
WARNING! Do not loosen the
top screws. This will break cassette.
-
Fit the replacement cassette Into the slots In the top of the post. (See Figure 4)
-
Slide the cassette all the way down the post slots. (See Figure 5)
-
Tighten screws securing the cassette into the post. (See Figure 6)
NOTE: Do not overtighten, as this may affect the belt retraction.
INSTRUCTION FOR DUAL MODELS (H-6454 ONLY)
REMOVE THE LOWER BELT CASSETTE
-
Remove post retaining screws. (See Figure 7)
-
Slide oft the post top. (See Figure 8)
-
Loosen the tour bottom screws on cassette and slide out the cassette. (See Figure 9)
-
Then. follow steps 3-6 on page one and replace post top.
1-800-295-5510
Web: uline.com