MELODYSUSIE PC650E Electric Nail Drill Instruction Manual

Table of Contents

Thank you for choosing MelodySusie! Please read this instruction manual carefully and keep it in an accessible location so you may refer to it later.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING.
To reduce the risk of burns, electrocution, fire, or injury
Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.
NOTE: If the USB cable connects to the adapter, it is recommended to use an adapter of 5V/2A. Please do not exceed 5V/2A, or the drill will burn out.

Check the power supply cord before the first use and during the life of the device. Do not use this device if it has a damaged cord or it is not working properly or damaged.
Do not plug this device into a voltage system that is different from the voltage system specified on the device. Use with improper voltage will damage the device and VOID warranty.
Please use the original cord only.

The battery needs to be charged fully before first use to ensure optimal performance.
Do not overcharge the device or use it when it is charging.
- Charge the device in a well-ventilated condition at 0°C~40°C.
Do not charge the device close to flammable or explosive materials. When charging the device please do not cover it with clothes or other things.
If the device is not used for long periods, you should charge and discharge it once every three months. In normal conditions, the battery performance will decline over several years.

Note for Using

Do not touch the cord with the wet hand to prevent electric leakage and shock or fire. Please turn the power off after use.
Do not use the crooked or damaged nail drill bit or replace the bit when the power is on.
Adjust the speed gradually, not abruptly. Please stop using it once the unusual movement and noise happen.
Misuse, dropping, or excessive force may cause device damage.
Children under 18 years of age should not use this device without parental consent and supervision.

Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
Do not keep the device in a place that is about or more than 50°C in a metal box, car, or other places in high temperatures). Keep the device dry and keep it away from the oil and grease.
Store the device in a cool and dry place. Do not store it in a hot or humid environment.
Keep the electrical cord away from heated surfaces.
Do not dispose of the device in heat or fire.
Do not clean the device with harmful chemicals or detergents.

Note for Injury

Having manicures done frequently can cause injuries to the nails as well.
Do not use the device if you have an open wound on your nail, hand, or foot.
If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professional before using the device.
- The operator shall be responsible for any consequences including product damage or accidents if not strictly comply with the instructions. If you require any technical support, please contact us.
- SAVE THE INSTRUCTION MANUAL

Large Sapphire Wheel
- Remove calluses on the soles of the foot.
Small Sapphire Wheel
- Remove hard skin and corns on the soles of the foot.
Sapphire Callus File
- Remove calluses on the soles of the heel.
Sapphire Cone
- Reduce thick toenails and calluses and remove cracks on heels.
Felt Cone
- Eliminate dust, polishing, and matting.
Mandrel + Sanding Bands
- Thick and fragile nails trimming, grinding, and polishing.
Rounded Top Bit
- Remove product in sidewalls and remove callused skin around sidewalls.
Umbrella Top Shape Bit
- Clean cuticle area and sidewalls.
- Clean dirt from under the nails.
Dust Protector
- Prevent dust splashing.
- Need to be used together with bits.

MELODYSUSIE-PC650E-Electric-Nail-Drill-FIG-5

Step 1: Insert the desired drill bit firmly.
Step 2: Turn the Forward/ OFF/ Reverse button to “F” or “R” to turn on the device or change the rotation direction. (Defaults to level 1 on startup)
Step 3: Turn the Speed Control to “+” to accelerate or “-” to decelerate the rotation speed between 20 gears. (When the speed is at the highest or lowest, the indicator light will flash briefly to remind; The color of the indicator light will be different from different speed levels)
Step 4: Turn back the Forward/ OFF/ Reverse button to turn off the device. Take out the nail drill bit.

Quick gear change tips:

Push the speed control to the “+” or “-” position for 3 seconds to increase or decrease rotation speed quickly.

Take out the cord connect it to the charging port and wait for a full charge.
It cannot be used while charging. The battery needs to be charged fully before first use.
When the power is plugged in, the red light flashes when charging, and the green light stays on when fully charged.
When your product’s battery is running low and requires a recharge, a rapidly flashing red indicator light will alert you.
- The charging time is about 2.5 hours.

Warranty and Customer Service

MelodySusie offers a 6 months limited warranty on quality-related issues.
Please apply for your extra 6-month warranty extension and download the instruction manual in other languages by registering on www.melodysusie.com if needed.
Thank you for purchasing from MelodySusie.
You are welcome to share your experience after receiving the product.
Please contact us for any technical support if needed.

SAVE THE INSTRUCTION MANUAL

For FAQs and more information, please visit: https://www.melodysusie.com/pages/faqs
www.melodysusie.com
US Service:service@melodysusie.com
UK Service: service.uk@melodysusie.com
FR Service:service.fr@melodysusie.com
DE Service:service.de@melodysusie.com
Whipple Rd, Union City, CA 94578
EC REP
E-CrossStu GmbH
69 Mainzer Landstrasse, 60329
Frankfurt am Main, Hessen, Germany
E-crossstu@web.de
UK REP
YH Consulting Limited
C/O YH Consulting Limited Office 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
weel.keren@gmail.com