MELODYSUSIE X Series 3 in 1 Nail Drill with Nail ART Lamp Instruction Manual

MELODYSUSIE X Series 3 in 1 Nail Drill with Nail ART Lamp

Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.

IMPORTANT SAFEGUARDS

• READ ALL INSTRUCTIONS BEFORE USING.
• To reduce the risk of burns, electrocution, fire or injury to persons.
• Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.

Check before Using

1. Check the power supply cord before the first time use and during the life of the device. Do not use the device if it has a damaged cord or plug, or if it is not working properly.
2. Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
3. Use the original charger only.
4. The handpiece of this device is not compatible with other models of nail drill machines from MelodySusie and other brands. Do not connect the handpiece with other nail drill machines.

Note for Battery

1. The battery needs to be charged fully before the first use to ensure optimal performance.
2. Do not overcharge the device or use it when charging.
3. Charge the device in a well-ventilated condition with 0″C-40″C. Do not charge the device close to flammable or explosive materials.
4. Do not cover any thing on it when charging.
5. Charge the device once every three months to keep it in normal conditions, the battery performance will decline over several years.

Note for Using

1. To prevent electric leake and shock or fire, do not draw out the connecting wires during use or touch the plug with the wet hand.
2. Turn the power off after use.
3. Do not use the crooked or damaged nail drill bit.
4. Do not replace the bit when the power is on.
5. Do not adjust the speed abruptly, stop use once the unusual movement and noise happens.
6. Misuse, dropping or excessive force may cause device damage.
7. Minor should not use this device without parental consent and supervision.

Maintenance Work

1. Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
2. Do not keep the device in a metal box, car, or other places at high temperature(more than 50°C). Keep the handpiece dry and away from oil and grease.
3. Do not store the device in a hot or humid environment. Store it in a cool and dry place.
4. Keep the electrical cord away from heated surfaces.
5. Do not dispose of the device in heat or fire.
6. Do not clean the device with harmful chemicals or detergents.

Note for Injury

1. Having manicures done frequently can cause injuries to the nails as well.
2. If you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with improper operation.
3. Do not use the device if you have an open wound on your nail or hand.
4. If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professional before using the device.

The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions. If you require any technical support, please contact us.

SAVE THE INSTRUCTION MANUAL

Six Drill Bits

Small Barrel

• Surface work

Mandrel+Sandlng Bands

• Surface work, shortening, and removal

Needle Head

• Polish nall edge

Cone

• Under nails, cuticles, and sidewalls

Safety Bit

• Cuticle work, polish nail side edge

Large Barrel

• Surface work for backfill cutting, shortening, and Infill cuticle.

1. DC Socket
2. Drill Bit
3. ON/OFF F/R Button
4. Speed Controller

Nail Art Lamp

1. ON/OFF
2. LED Light/UV Light
3. Touch Switch
4. Heat Dissipation Hole
5. Flexible Tube
6. Charge Jack
7. Charging Indicator
8. USB Output Port

How to Use

• Step 1: Insert the drill bit firmly into the drill.
• Step 2: Please make sure the control switch of the nail drill is OFF (in the middle position).
• Step 3: Connect the nail drill power cord to the USB port of the lamp.
• Step 4: Press the “ON/OFF” button of the nail lamp to power on the device.

For the Lamp

• The lamp into LED Light Mode.
• Touch once to turn to UV Light Mode.
• Touch twice to turn off the light.

The UV Light Mode will switch into LED Light Mode after 60 seconds curing automatically.

For the Nail Drill

• Move the control switch up or down to choose the direction of spinning.
• Slide the speed controller to accelerate or decelerate the rotation speed.
• After the polishing is finished, please turn off the nail drill by returning the control switch to the middle position.

Step 5: Press the “ON/OFF” button to power off the device.

NOTE

• LED Light Mode: Without curing function. can only provide the lighting requirement for manicure work.
• UV Light Mode: Work for nail gel polish curing (When used in conjunction with MelodySusie Nail Lamp whose power is higher than 48W).
• Avoid eye contact directly with the light, which may cause eye injury.

Charging

1. Connect the charging cord to the nail lamp and insert it into the adaptor.
2. Insert the main plug into a wall socket.
3. The indicator will change from RED to GREEN when the device is fully charged.

Problems and Terms of Settlement

Part 1: Nail Art Lamp

Part 2: Nail Drill

Specifications

• Input voltage range: 100-240V 50/60Hz
• Output voltage: 5V/2A
• E-mail: [email protected]
• E-mail: [email protected]
• Website: www.melodysusie.com

Warranty and Customer Service

MelodySusie offers a 6 months limited warranty on quality-related issues. Please apply for your extra 6 months warranty extension and download the instruction manual in other languages by registering on www.melodysusie.com if needed.

Thank you for purchasing from MelodySusie. You are welcome to share your experience after receiving the product. Please contact us for any technical support if needed.

• http://www.melodysusie.com
• US Service: [email protected]
• UK Service: [email protected]
• FR Service: [email protected]
• DE Service: [email protected]

Whipple Rd, Union City, CA 94578

AMZLAB GmbH
Laubenhof 23, 45326 Essen, Germany

THEMIS AR support Ltd.
85 Great Portland St. London, United Kingdom, W1W 7LT

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>