melodySusie S Series Stacie Electric Nail Drill User Manual
- June 3, 2024
- melodysusie
Table of Contents
**melodySusie S Series Stacie Electric Nail Drill User Manual
**
Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING.
To reduce the risk of burns, electrocution, fire, or injury to persons.
Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.
Check before Using
- Check the power supply cord before the first use and during the life of the device. Do not use this device if it has a damaged cord or plug or it is not working properly or damaged.
- Do not plug this device into a voltage system that is different from the voltage system specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
- Please use the original charger only.
- The handpiece of this nail drill is not compatible with other models of nail drill machine from MelodySusie and other brands. Please don‘t connect the handpiece with a different nail drill machine.
Note for Using
- Do not draw out the connecting wires during use or touch the plug with the wet hand to prevent electric leakage and shock or fire. Please turn the power off after use.
- Do not use the crooked or damaged nail drill bit or replace the bit when the power is on.
- Adjust the speed gradually, not abruptly. Please stop to use once the unusual movement and noise happens.
- Misuse, dropping or excessive force may cause device damage.
- Children under 18 years of age should not use this device without parental consent and supervision.
Maintenance Work
- Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
- Do not keep the device in a place which is about or more than 50°C(in a metal box, car or other places in high temperature). Keep the handpiece dry and keep it away from the oil and grease.
- Store the device in a cool and dry place. Do not store it in a hot or humid environment.
- Keep electrical cord away from heated surfaces.
- Do not dispose of the device in heat or fire.
- Do not clean the device with harmful chemicals or detergents.
Note for Injury
- Having manicures done frequently can cause injuries to the nails as well.
- If you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with the improper operation.
- Do not use the device if you have an open wound on your nail or hand.
- If you have any skin diseases, heat-sensitive, allergic reaction, onychomycosis or any other disorder, you should consult your doctor and medical professional before using the device
The operator shall be responsible for any consequences including product
damage or accidents if not strictly complies with the instructions.
If you require any technical support, contact us at
[email protected]
SAVE THESE INSTRUCTIONS
Six Drill Bits
How to Use
Step 1: Choose the drill bit and insert the bit into the drill firmly.
The drill bit hole could be used to place the drill bits.
Step 2: Connect the handpiece to the handpiece jack.
Step 3: Connect the power supply with the power control device in the DC
socket.
Step 4: Rotate the speed control knob to accelerate or decelerate the rotation
speed.
Step 5: Change the direction of rotating the drill bit by pressing the F/R
button if needed.
Step 6: After polishing is finished, please turn off the device and take out
the drill bit. The handpiece hole could be used to place the handpiece when
not in use.
Problem and Terms of Settlement
| Misoperation | Causing | Terms of settlement |
|---|---|---|
| Changing the nail drill bit when the power is on | 1. Motor burns out |
2. Bearing damages (Loud Noise)
| Turn off the power when changing the nail drill bit
The power is on when not in use| Turn off the power when not in use
Long time, Large load work| ****
1. Motor burns out
2. Device lifespan shortens
3. eearing damages (Loud Noise)
4. Handpiece damages
| The continuous working time should not be too long when the working
condition is in heavy load. When the device is overheating, it should be
stopped immediately to make it return to normal temperature.
Insert into a mismatched power supply| 1. Motor burns out| According to the
device voltage requirements, insert the matching power supply
Put the power cord at random/ Pull the power cord| ****
1. Device lifespan shortens
2. Power cord brokes
3. Poor connection
4. Easy to cause shon circuit
| Do not pull the power cord
Replace the original charger randomly| 1. Device damages
2. Easy to cause short circuit
| Use the original specification charger
Dust into device| 1. Bearing damages (Loud Noise)
2. Motor gets hot
3. Rotational speed slows down
4. The potentiometer speed regulation fails
5. Handpiece damages
| Clean dust, add the dust-proof protection of the dustproof hood
Misoperation| Causing| Terms of settlement
---|---|---
Device drops to the ground or by other impacts| 1. The ON/OFF button doesn’t
work
2. The potentiometer speed regulation fails
3. F/R button doesn’t work
4. Handpiece damages
| Avoid device drops or by other impacts ( If the handpiece was damaged, it
can be purchased separately. )
Insert the nail drill bit into the device incorrectly| 1. Drill bit falls out
2. High vibration
3. Drill bit stucks
| insen the nail drill bit into the device correctIy/If the drill bit stucks,
please try to take out it hard
The size of drill bit is not suitable| 1. Can not insert the drill bit into
the device| Use standard drill bit
Water into the device/operate in wet or moist conditions/Use a wet cloth to
clean the device| 1. Motor burns out
2. Device lifespan shortens
| Do not operate in wet or moist conditions/only a dry cloth is allowed for cleaning
Specifications
Input voltage range: 100-240V 50/ó0Hz
Output voltage: 12V/1A
Email: [email protected]
Email: [email protected]
Website: www.melodysusie.com
Warranty and Customer Service
MelodySusie offers a 6-month limited warranty on quality related issues. Please apply for your extra 6-month warranty extension and download the user manual in other languages by registering on www.melodysusie.com if needed.
US: [email protected]
EU: [email protected]
http://www.melodysusie.com
Whipple Road, Union City, CA 94578
AMZLAB GmbH
Laubenhof 23, 45326 Essen, Germany
THEM IS AR support ltd
85 Great Portland St, London, United Kingdom, W1 W 7 LT