melodysusie M Series Sparkle Plus Rechargeable Nail Drill User Manual
- June 4, 2024
- melodysusie
Table of Contents
M Series Sparkle Plus Rechargeable Nail Drill
User Manual
Thank you for choosing Melodysusie! Please read this user guide carefully and keep it in an accessible location as you may refer to it later.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING.
**** To reduce the risk of burns, electrocution, fire, or injury to persons.
Please be sure to read the safety instruction as follow to avoid potential
hazards that could result in personal injuries or damage to the device.
Check before Using
- Check the power supply cord before the first use and during the life of the device. Do not use this device if it has a damaged cord or plug or if it is not working properly or damaged.
- Do not plug this device into a voltage system that is different from the voltage system specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
- Please use the original charger only.
- The handpiece of this device is not compatible with other models of nail drill machines from MelodySusie and other brands. Please don’t connect the handpiece with other nail drill machines.
Note for Battery
- The Battery needs to be charged fully before first use to ensure optimal performance.
- Do not overcharge the device or use it when it is charging.
- Charge the device in well-ventilated condition with 0°C– 40′ C. Do not charge the device close to flammable or explosive materials. When charging the device, please do not cover it with clothes or other things.
- If the device is not used for long periods of time, you should charge and discharge it once every three months. In normal conditions, the battery performance will decline over serval years.
Note for Using
- Do not draw out the connecting wires during use or touch the plug with a wet hand to prevent electric leakage and shock or fire. Please turn the power off after use.
- Do not use the crooked or damaged nail drill bit or replace the bit when the power is on.
- Adjust the speed gradually, not abruptly. Please stop to use once the unusual movement and noise happen.
- Misuse, dropping or excessive force may cause device damage. 5. Children under 18 years of age should not use this device without parental consent and supervision.
Maintenance Work
- Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
- Do not keep the device in a place that is about or more than 50 C (in a metal box, car, or other places at high temperatures). Keep the handpiece dry and keep it away from the oil and grease.
- Store the device in a cool and dry place. Do not store it in a hot or humid environment.
- Keep the electrical cord away from heated surfaces.
- Do not dispose of the device in heat or fire.
- Do not clean the device with harmful chemicals or detergents.
Note for Injury
- Having manicures done frequently can cause injuries to the nails as well.
- If you need to remove the gel polish of natural nails, try to use nail polish remover pads to avoid damage to the nail bed with improper operation.
- Do not use the device if you have an open wound on your nail or hand.
- If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professional before using the device.
The operator shall be responsible for any consequences including product
damage or accidents if not strictly complies with the instructions. If you
require any technical support, contact us at
service@melodysusie.com
SAVE THESE INSTRUCTIONS
Six Drill Bits
How to Use
Step 1: Connect the handpiece to the handpiece jack.
Step 2: Choose one grinding drill bit release the handpiece insert the
drill bit at the drill head and lock it in place.
Step 3: Press the ON/OFF button to turn on the device.
Step 4: Rotate the speed control knob to accelerate or decelerate the
rotation speed.
Step 5: Change the rotation direction of the grinding drill bit on the
F/R button if needed.
Step 6: After the polishing is finished please rotate the central barrel
and take out the drill bit. The Handpiece fixture could be used to place the
handpiece when not in use.
- ON/OFF Speed control knob
- F/R Button
- Handpiece jack
- Portable hook
- LCD screen ( It will show the RPM and the battery.)
- Handpiece fixture
- DC socket
How to Replace Drill Bit
Originally a blank bar is attached but it can be removed as you like. Please make sure that the desired bit is suitable for the collet.
*Do not move the central barrel during operation.
- Turn the central barrel clockwise until hearing a “click” sound to release the drill bit. Taking out the blank bar. Put the desired bit into the handpiece.
- Turn the central barrel counterclockwise until hearing a “click sound to lock the drill bit in place.
- Be sure to confirm the rotation of the bit and collet. Please take care of your fingers not to be hurt by the bit edge.
Charging
- Take out the adapter and connect it to the DC socket.
- Connect the power supply with the adapter and insert the main plug into a wall socket. fixture
- The LCD screen will show the battery.
Problem and Terms of Settlement I
| Misoperation | Causing | Terms of settlement |
|---|---|---|
| Changing the nail drill bit when the power is on | 1. Motor burns out | |
| 2. Bearing damages (Loud Noise) | Turn off the power when changing the nail |
drill bit
The power is on when not in use| Turn off the power when not in use
Overcharge| 1. Battery lifespan shortens| Not exceed the specified charging
time
Long time, Large load of work| 1. Motor burns out
2. Device lifespan
shortens
3. Bearing damages (Loud Noise)
4. Handpiece damages| The continuous working time should not be too long when
the working condition is in heavy load. When the device is overheating, it
should be stopped immediately to make it return to normal temperature.
Insert into a mismatched power supply| 1. Motor burns out| According to the
device voltage requirements, insert the matching power supply
Put the power cord at random/ Pull the power cord/ Use the device when
charging| 1. Battery damages and device lifespan shorten
2. Power cord brokes
3. Poor connection
4. Easy to cause a short circuit| Do not pull the power cord/Do not use the
device when charging
Replace the original charger randomly| 1. Device charging unsuccessfully
2. Battery damages
3. Easy to cause a short circuit| Use the original specification charger
Dust into device| 1. Bearing damages (Loud Noise)
2. Motor gets hot
3. Rotational speed slows down
4. The potentiometer speed regulation fails
5. Handpiece damages| Clean dust, add the dust-proof protection of the
dustproof hood
Misoperation| Causing| Terms of settlement
---|---|---
The device drops to the ground or by other impacts| 1. The ON/OFF button
doesn’t work
2. The potentiometer speed regulation fails
3.F/R button doesn’t work
4. Handpiece damages| Avoid device drops or other impacts ( If the handpiece
was damaged, it can be purchased separately. )
Insert the nail drill bit into the device incorrectly /Rotate the central
barrel into the place incorrectly/Take the drill bit out when the Central
barrel is locked| 1. Drill bit falls out
2. High vibration
3. Drill bit stocks
4. The Handpiece stocks and cannot be turned on
5. Handpiece damages| Insert the nail drill bit into the device correctly/If
the drill bit sticks, please release the handpiece and try to take out it
hard/Rotate the Central barrel correctly
Replace the drill bit when the handpiece is not completely stopped| 1. The
handpiece stocks and cannot be turned on 2. Handpiece damages| Do not replace
the drill bit when the handpiece is not completely stopped
The size of the drill bit is not suitable| Can not insert the drill bit into
the device| Use a standard drill bit
Water into the device/Operate in wet or moist conditions/Use a wet cloth to
clean the device| 1. Motor burns out
2. Device lifespan shortens| Do not operate in wet or moist conditions/Only a
dry cloth is allowed for cleaning
Specifications
Input Voltage Range: 100-240V 50/60Hz
Output Voltage: 12.6V/0.8A
Email: service@melodysusie.com
Website: www.melodysusie.com
Warranty and Customer Service
MelodySusie offers a 6-month limited warranty on quality-related issues. Please apply for your extra 6-month warranty extension by registering on www.melodysusie.com if needed.
MAKE BEAUTY A NEW SMART
US:service@melodysusie.com
EU:service.uk@melodysusie.com
**http://www.melodysusie.com
Whipple Road, Union City, CA 94578
MATLAB GmbH
Laubenhof 23, 45326 Essen, Germany
THEMIS AR support ltd
85 Great Portland St, London, United Kingdom, W1W 7LT**
Documents / Resources
|
melodysusie M Series Sparkle Plus Rechargeable Nail
Drill
[pdf] User Manual
M Series Sparkle Plus Rechargeable Nail Drill, M Series, Sparkle Plus
Rechargeable Nail Drill, Plus Rechargeable Nail Drill, Rechargeable Nail
Drill, Nail Drill, Drill
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>