Sonoff B02-B-A60 Wi-Fi Smart LED Bulb User Manual

LBS B02/B05- B
User manual V1.0
Wi-Fi Smart LED Bulb

Operating Instruction

1. Install the device
   To avoid electric shock, please turn off the power before installing the device.
   The device works under 220-240V AC only.

2. Download APP
   http://app.coolkit.cc/dl.html

3. Power on
   

After powering on, the device will enter the quick pairing mode (Touch) during the first use. The device enters the “breathing mode”.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please press the manual switch three times repeatedly at an interval of every 1s (Off-ON-Off-ON-Off-ON). The “breathing mode” indicates the light enters quick pairing mode.

4. Add the device
Tap “+” and select” Quick Pairing “, then operate following the prompt on the app.

Compatible Pairing Mode

If you fail to enter Quick Pairing Mode (Touch), please try”Compatible Pairing Mode” to pair.

1. Press the light switch 5 times repeatedly at an interval of every 1s (Off-ON-Off-ON-Off-ON-Off-ON-Off-ON) when the light is on. The “quick flash” indicates the device enters the compatible pairing mode.
2. Tap “+” and select” Compatible Pairing Mode on APP.
   Android app:
   Enter Wi-Fi password and tap “Next”. Be patient until pairing completes.
   iOS app:
   Select Wi-Fi SSW) with ITEAD-** and enter the password 12345678, and then go back to eWeLink APP and tap “Next”. Be patient until pairing completes.

Usage of being an ordinary bulb

Power on the bulb, it will enter quick pairing mode (The bulb change from bright to dim and cycle the mode), after 10s, if power off, it will go solid and keep warm light at the highest brightness.

Specifications

B02-B-A60 is a dual-color LED smart bulb.1305-B-A60 is an RGB LED smart bulb.

Product Introduction

Features

SONOFF LED is a LED smart bulb that allows users to adjust the brightness and color, and remotely turn on/off the connected devices via your smartphone, schedule it on/off and share it with your family to control together.

Factory Reset

Press the light switch 3 times repeatedly at an interval of every ls (Off-ON- Off-ON-Off-ON) when the light is on. The “breathing mode” indicates the device enters the quick pairing mode (Touch).

Please reset the device to factory defaults if you want to use other Wi-Fi networks, then reconnect the network.

Common Problems

Why does my device stay “Offline”?

1. Maybe you have entered the wrong Wi-Fi password.
2. Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again.
3. The SG Wi-Fi network is not supported and only supports the 2.4GHz wireless network.
4. Maybe the MAC address filtering is open. Please turn it off.

If none of the above methods solved the problem, you can open the mobile data network on your phone to create a Wi-Fi hotspot, then add the device again.
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type 802-13-A60/605-B-A60 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://www.sonoff.tech/usermanuals Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, China
ZIP code: 518000
Website: sonoff.tech
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>