MELODYSUSIE P-C180F Rechargeable Nail Drill Instruction Manual

MELODYSUSIE P-C180F Rechargeable Nail Drill Instruction Manual

Thank you for choosing Meekly Susie! Please read this instruct Ton manual carefully and keep ii in en docetic so you may refer to it later.

01 Safety Instructions

READ ALL INSTRUCTIONS BEFORE USING.

⚠ Please read the following safety instructions carefully to avoid potential hazards that could lead to personal injury or device damage.

NOTE: Use an adapt of 5V 2A If the USB cable of the device comets to 1he adapt«. Do not exceed 5V 2A, or the mill will bum out.

Check before Using

1. Check the cord and device before using. Do not use the damaged  to charge the device. Do not use the device II It la not
   functioning correctly.

2. Only plug this device Into a voltage system that matches the voltage system specified on the device. The use of iniiroper
   voltage cm cause damage to 1he deice end will VOID the warranty.

3. Use the original power cord only.

Note for Battery

1. Fully charge the battery before the first u9e to en9ura optimal performance.
2. Do not overcharge the device orujo the .ten It Is charging.
3. Charge1he device In a well-ventilated area wlthln1he temperature’! range of D”C to4D”C.
4. Do not charge1he device near arrtflammable orexploaive materials.
5. Do not cover the device with do this or other materials while ifs charging.
6. Charge and discharge the device once every IIY”ee months lf 1he device is not used for long periods. Please note that the blotter
   performance may decline ewer several years under normal conditions.

Note for Using

1. Turn the power off after use.
2. Do not use crooked or damaged nail drill bits, and only replace he bit when the power is off.
3. Adjust the speed gradually, avoiding sudden changes. stop using the device if there are any unusual movements or noises.
4. Misuse, dropping or eve force may cause deice damage.
5. Individuals under the age of 18 require parental consent and to use thali device.
6. Do not operate in Altor moist condition.
7. Do not touch envy rotating pr-t while the device i9 working.

Maintenance Work.

1. Do not dis assemble the device. It Is dangerous and will VOID the warranty.
2. Do not place the device at approximately or more than 50-C (in a metal box, car, or other hot places). Keep the device dry and keep it away I’m oil and grease.
3. Store the device in a cool and dry place. Do not store to In a hot or humid environment.
4. Store the power cord pearly and kfl8Jl it li1Nlf’/ from honed surfaces.
5. Do not dispose of the device in heat or fire.
6. Do not clean the device with harmful chemicals or detergents.
   Only a dry cloth Is allowed forcleming.

Note for Injury

1. Requiem manicures can also cause damage to you- nalls.
2. If you need to remove the gel polish from natural nall9, try to use nail poli!ITT remover pad5 to avoid dam1111eto the nail beef with the improper operation.
3. Do not use the device if you have open wound on your nails or hands.
4. If you have skin diseases, heat sensitivity. allergic reactions, onychomycosis, or any anther condition, consul your doctor and
   medical professional before us Tang the device.

02 Contents

03 Using the Nail Drill

step 1: Insert the drill bit firmly into the drill head.
Step 2: Press 1he DN/DFF button fer 3 seconds to tum on the device.
Step 3: Press 1he +/- button to accelerate or decelerate the rotation speed between 25 Speeds. ,L.o,n,g Press the+/- button to quickly adjust to the desired
Step 4: Press 1he F/R button twice quickly to shah the rotation direction to forward when the LCD careen avowal “P’ or reverse when 1he LCD screen shows “R”.
Slap 5: Press the Pause/On button to pause the device when needed, then presa to ru-i it geeni.
Step 6: Press the ON/OFF button for 3 seconds to turn off the device after poll shin. Take out1he nail drill bit.

Tips

If the nan (tell 19 accidentally blocked while working, It will automatically stop to protect 1he motor and restart by shorty) ressingthe Pause/On button once.

1. ON/OFF Pause/ DN FIR Button
2. + Button
3. – Button
4. LCD Screen ( it will show RPM/Rotation Direction)
5. Power/Battery lndloetor

Charging

• Only charge the device when the power is off.
• Do not draw out the connecting wire during charging or touch it with wet hands to prevent electrical leakage. shock, or fire hazards.

1. Take out the USB cord and comec1 one end to the charging port and the other end to a USB power supply.
2. Charge the device when the Indicator light turns red. And the device Is fully charged when1he indicator light stays Green.

04 Problem and Terms of Settlement

O5 Specifications

Input Voltage Range: 5V/2A

06 Warranty and Customer Service

■ 6-month limited warranty(Apply for an e:dre 6-month warranty e:ctenslon by registering on https://www.melodysusie.com/pages/extend-warranty if needed).
■ If you require any technical support, please contact us.
Website: www.melodysusle.com
Email: service@melodysusre.com
Email: service.uk@melodysusJe.com

www.melodysusie.com
US Service: service@melodysusie.com
UK Service: service.uk@melodysusie.com
FR Service: service.fr@melodysusie.com
DE Service: service.de@melodysusie.com
Whipple Rd, Union City; CA 94578

(EU| REP) AMZLAB GmbH
Laubenhof 23/45326 Essen, Germany
(UK|REP) THEMIS AR support ltd.
85 Great Portland St, London, United Kingdom, W1W 7LT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>