TELTONIKA RUTX11 Outdoor LTE Wi-Fi GPS Bluetooth Antenna Installation Guide
- August 26, 2024
- teltonika
Table of Contents
TELTONIKA RUTX11 Outdoor LTE Wi-Fi GPS Bluetooth Antenna
Specifications
- Order Code: PR1IC970
- Product: Outdoor LTE/Wi-Fi/GPS/Bluetooth Antenna
- Compatible with: RUTX11 and RUTM11 routers
Product Usage Instructions
Antenna Installation
- Check the label for instructions.
- If using Passive PoE power supply, install the RJ-45 plug in the LAN1 port.
- Do not turn the screws.
- Mount the lower lid with the RJ45 socket on the left side relative to the router’s LAN port.
Mast & Wall Installation
- For Standard Mast:
- Min./Max. mast diameter: 40 – 60 mm (1.57-2.36 inch)
- For Wall Installation:
- Screws are not included in this product.
Power Supply Installation
- For Standard PoE Power Supply:
- Teltonika routers support passive PoE only via their LAN1 port.
- Passive PoE power supply is not included in this product.
FAQ
Q: Can I use an active PoE power supply with this antenna?
A: No, Teltonika routers support passive PoE only via their LAN1 port, so an
active PoE power supply is not compatible.
QUICK INSTALLATION GUIDE
Outdoor LTE/Wi-Fi/GPS/Bluetooth antenna for RUTX11 and RUTM11 routers
WHAT’S INSIDE
| 1 | Top cover |
|---|---|
| 2 | Sealing gasket |
| 3 | Lower lid |
| 4 | Mounting |
| 5 | U-bolt M8 part 1 |
| 6 | U-bolt M8 part 2 |
| 7 | RJ45 socket |
| 8 | Grounding cable |
| 9 | M8 nuts |
| 10 | M6 x 10 screw |
| 11 | 3.1 x 12 screw |
ANTENNA INSTALLATION
STANDARD POE POWER SUPPLY
Teltonika routers support passive PoE only via their LAN1 port 
Please note:
- Teltonika routers are not compliant with the IEEE 802.3af-2003 standard. Powering one via an IEEE 802.3af-2003 power supply will damage the router due to the this standard’s voltage.
- Teltonika routers are not compliant with the IEEE 802.3at standard. They cannot power other devices via Ethernet. They can be powered via any Gigabit passive PoE power supply with a voltage of 9-30 VDC, such as our own power supply:
- For power supply, you can use any Gigabit Passive PoE power supply with a voltage of 18-48V in the case of RUTX series routers.
You can use, for example, a power supply from our offer:
PR324EUB
Passive PoE power supply is not included in this product
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>