hobbydrone PT 7 FPV Drone Partizan Installation Guide

hobbydrone PT 7 FPV Drone Partizan

Product Specifications

• Model: PT 7
• Material: Aluminum
• Weight: 2.5 lbs
• Dimensions: 12″ x 8″ x 6″

Product Usage Instructions

• Step 1: Pressure Rivet Nuts
  Start by installing pressure rivet nuts for the six recessed holes in the center plate as marked in the drawing.

Step 2: Assembly
Assemble the upper plate, center plate, bottom plate, and the four arms in the pattern shown in the photo. Use the following round head screws:

• M314mm6 round head screw (for specific location)
• M316mm4 round head screw (for specific location)
• M38mm4 round head screw (for specific location)
  Make sure the holes are aligned during assembly.

Step 3: Aluminum Posts
Screw on the aluminum posts for the eight screws indicated in the diagram.

Step 4: Tail Print and Lens Clamp Plate
Attach the tail print in the position shown in the picture. Install the lens clamp plate in the marked position in the picture ensuring the holes are aligned. Then cover the top plate and secure with eight round head screws (M38mm8).

Frequently Asked Questions (FAQ)

• Q: Do I need any special tools for assembling this product?
  A: No, basic tools like a screwdriver are sufficient for assembling the product following the provided instructions.

• Q: Can I disassemble and reassemble the product easily?
  A: Yes, you can disassemble and reassemble the product following the reverse steps of the assembly instructions.

PT 7 INSTALLATION MANUAL

PACKING LIST

Installation Steps

• Pressure rivet nuts for the six recessed holes in the center plate (marked in the drawing)

• Assemble the upper plate, center plate, bottom plate, and the four arms in the pattern shown in the photo and screw in three different types of s crews.(The holes should be aligned)

• Screw on the aluminum posts for the eight screws indicated in the diagram.

• Attach the tail print in the position shown in the picture

• Install the lens clamp plate in the marked position in the picture (the holes are aligned), then cover the top plate, hit the eight screws

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>