SEALEY VSE725V2 Front Axle Upper Ball Joint Extractor Instruction Manual
- August 24, 2024
- SEALEY
Table of Contents
FRONT AXLE UPPER BALL JOINT EXTRACTOR/ INSTALLER – VW T4
MODEL NO: VSE725.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instruction manual Wear eye protection
1. SAFETY
WARNING! Ensure Health and Safety, local authority and general workshop
practice regulations are adhered to when using tools.
Maintain the tool components in good and clean condition for best and
safest performance.
Ensure that a vehicle which has been jacked up is adequately supported
with axle stands.
Wear approved eye protection. A full range of personal safety equipment
is available from your Sealey stockist.
Wear suitable clothing to avoid snagging. DO NOT wear jewellery and
tie back long hair.
Keep children and other unauthorised persons away from the working area.
Ensure there is adequate lighting prior to using the ball joint
replacement tool.
DO NOT use the kit if any parts are missing or damaged.
DO NOT use the ball joint replacement tool for any purpose other than
that for which it is designed.
IMPORTANT: These instructions are intended as a guide only. Always refer to the vehicle manufacturer’s service instructions or a proprietary manual to establish the current procedure.
2. INTRODUCTION
Suitable for removing and installing the upper front ball joint in situ without the need to disassemble. Features various adaptors used in different combinations for extracting and installing. Supplied in a storage case with each part numbered for simple selection.
3. APPLICATIONS
Model No: ………………………………………… VSE725.V2
Applications: …………….. VW: T4 2000cc, T4 2500cc
4. CONTENTS
| NO | Part Number | Description | Quantity |
|---|---|---|---|
| 1 | VSE725.V2-01 | Main body | 1 |
| 2 | VSE725.V2-02 | Screw | 1 |
| 3 | VSE725.V2-03 | Installing fixed base | 1 |
| 4 | VSE725.V2-04 | Removing guide ring (35mm) | 1 |
| 5 | VSE725.V2-05 | Removing guide ring (40mm) | 1 |
| 6 | VSE725.V2-06 | C-shaped removing bracket (black) | 1 |
| 7 | VSE725.V2-07 | C-Shaped Removing Bracket (7) | 1 |
| VSE725.V2-07 | Blow mould case | 1 |
5. OPERATION
NOTE: Clean and lubricate the thrust screw threads and grease before use.
EXTRACT INSTALL
a: BALL-JOINT
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice. Please note that other versions of this product are available.
If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or
01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500sales@sealey.co.uk www.sealey.co.uk
© Jack Sealey Limited Original Language Version
VSE725.V2 Issue:2 (H,F) 15/05/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>