cudy GP1200 AC1200 Pon Wi-Fi Router Installation Guide
- August 24, 2024
- cudy
Table of Contents
cudy GP1200 AC1200 Pon Wi-Fi Router
Specifications
- Model: PON Router
- Power Adapter: Included
- Wi-Fi: 5GHz
- Ports: LAN 1~4, PON
- LED Indicators: Power, PON, LOS
Product Usage Instructions
- Ensure the Power LED and PON LED are solid on to confirm successful registration with your PON router.
- Use a Wi-Fi or Wired method to connect your device to the router.
- Wi-Fi Method: Connect using the SSID and Password printed on the router.
- Wired Method: Turn off Wi-Fi on your device and connect it to the LAN port using an Ethernet cable.
- Open a browser on a connected device and access http://192.168.1.1 to change the Wi-Fi password following the provided instructions.
- If you encounter issues such as inability to access 192.168.1.1 or no internet access after configuration, follow the troubleshooting steps provided in the manual.
FAQ
Q1: Why can’t I access 192.168.1.1?
Try the following solutions:
- Check the Power status of the PON router.
- Ensure your device is connected to the router via Wi-Fi or Ethernet cable. Try using a different web browser or device.
- Press the RESET button for 5 seconds and reconfigure if needed.
- Contact your ISP for further assistance.
Q2: What if I can’t access the internet after configuration?
Try these solutions:
- Check the status of LED indicators.
- If ONT is set to router mode, ensure it has a valid IP address and gateway.
- If ONT is in bridge mode, verify the dial-up router configuration.
- Contact your ISP for additional support.
Usage Instructions
-
Connect and Register > 1
-
Connect to the PON Router > 4
-
Configure Wi-Fi Password > 5
-
Troubleshooting > 6
-
Verify if the Power LED and PON LED are solid on, and LOS LED is off, and your PON router is successfully registered.
Note: If the router fails to register, please contact your ISP for help.
Caution, laser
- DO NOT look directly at the PON port when the device is powered on, as well as the terminal of the indoor fiber cord, to prevent any harm to your eyes.
- Connect your device to the router using the A Wi-Fi or B Wired method.
A Wi-Fi
-
Connect your device to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router.
-
Go to step 5 and continue.
B Wired
-
Turn off the Wi-Fi on your computer and connect it to the router’s LAN port via an Ethernet cable.
-
Open a browser on a device that is connected to the router and follow the picture to change the Wi-Fi password.
EU Declaration of Conformity
- Cudy hereby declares that the device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU, directive 2011/65/EU, and Directive (EU) 2015/863.
- The original EU Declaration of Conformity can be found at http://www.cudy.com/ce.
CONTACT
NEED TECH HELP?
References
- Cudy, Your Home and Business Networking Solutions Provider
- Download Search – Cudy
- Download Search – Cudy