AVATTO TRV06 Wireless Smart Radiator Thermostat User Manual

AVATTO TRV06 Wireless Smart Radiator Thermostat

Product Information

Specifications:

• Product Name : TRV06 Wireless Smart Radiator Thermostat
• Model : TRV06
• Communication Protocol : Zigbee 3.0
• Power Supply : 2 x AA Battery
• Temperature Accuracy : High precision
• Display : LED Display
• Control Methods : App control, Voice control
• Programming : 4 time periods/day, Weekly programming
• Special Features: Child lock, Family share, Anti-scale function

Product Usage Instructions

1. Switch On/Off:
   To switch on the device, rotate the knob until the screen displays the desired temperature. To switch off, turn the knob until the screen displays “OF”.

2. Child Lock Function:
   To activate child lock, long press the knob in the power-on state until the screen displays “LC”. Repeat the operation to unlock.

3. Temporary Mode:
   In auto mode, manually change the temperature by adjusting the knob. The set temperature will remain until the next programmed time period.

4. Anti-Freezing Function:
   In OFF state (display OF), activate the anti-freezing function through the mobile app. The valve opens when room temperature is below 5 degrees Celsius and closes at 8 degrees Celsius.

Controller Installation:

1. Press the button to remove the protective cover.
2. Install 2 x AA batteries according to the polarity indicated in the battery compartment.

Warning:
If NTC is damaged, “Er” will be displayed. Replace the battery when the low voltage warning symbol appears.

Installation Steps:
Place the batteries in the compartment and secure with the protective cover.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

• ✉ www.alza.co.uk/kontakt
• ✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Overview

TRV06 Zigbee smart radiator thermostat is base on low power consumption tuya zigbee 3.0 module. It have been designed to replace traditional manual valve controller on radiator. Tuya cloud technology enable it with app control, voice control, 4 time period / day weekly programming, child lock, family share etc intelligent function. Attached with the TRV, we have offer valve installation accessories which make it compatible with over 90% of the radiator valve on market.

Electrical Specifications

• Power Supply: Two AA 1.5V alkaline batteries (LR6)
• Temperature sensor: NTC
• Temperature accuracy: ±1°C
• Display range: 0~60°C
• Temperature setting: 5~35°C
• Applicable temperature: 0~50°C
• Communication protoco l: Zigbee
• Frequency: 2.4G

Interface/size

Operating instruction

Switch on and off

| Please turn the knob until the screen displays “OF” when you turn off the machine. You only need to turn the knob to adjust the required temperature when you start the machine.
---|---

Windowing function

| When the window is opened, causing the room temperature drop more than 6°C within 4 minutes, the main screen displays “OP” and close the valve. If the room temperature rises 3°C, this status can be released, and it can be release automatically after 48 minutes or

manually.

Anti-scale function

| If the heat sink is not fully opened within two weeks or sued for a long time, the valve will be blocked due to silting-up, and the heat sink will not be able to be used. To ensure the normal use of the heat sink, the controller will automatically open the valve fully every

two weeks. It will running 30 seconds per time, and the screen displays “Ad”, the returns to normal working state again.

Child lock function

| ****

In order to prevent the settings of the controller from being mistakenly modified by children, long press the knob to activate the child lock function in the power-on state, and the screen displays “LC”. If you need to unlock it, please repeat the activation operation.

Temporary mode

| When TRV in auto mode, if you want to manually change the temperature, turn the button to adjust the current temperature you want to set, this temperature will last till next programmed time period start.

Anti-freezing

| Under OFF state (display “OF”), the mobile APP shows that the anti- freezing function is on. When room temperature lower than 5 degrees Celsius, the valve open, when temperature rises to 8 degrees Celsius, the valve close.

Warning

| ****

In normal working status, if NTC is damaged and “Er” will be displayed.

---|---

Low voltage warning function

| ****

When the battery voltage is too low, the alarm symbol ****will be displayed to remind the user to replace the battery.

Controller Installation

Electricity way

1. Press the button to remove the protective cover.
2. Install 2**AA battery and protection cover.

AA Battery x 2

Attention

Please install the battery according to +- pole of the icon in the battery compartment.

Installation steps

1. Put the battery in the battery compartment and cover it with a protective cover.
2. Screen display.( CL)
3. When the push rod is drawn flush with the bottom. ¨
4. Place the controller on the valve of the M30*1.5mm threaded connection and tighten the copper ring. If your valve interface does not match the controller, install the accessory first.
5. Press the rotation button, the screen will display the controller starts to match the valve stroke, and the initial setting will be entered after the match.

Parts selection and installation.

1. Check the valve size on your valve body.
2. Accessories installation

• Danfoss
  1/2 valve (RA)
  Please fix the valve interface directly and then tighten the screw.

• Caleffi
  1/2 valve
  Please pace the fittings directly on the valve and press hard to make the fittings and the valve jam.

• Giacomini
  1/2 valve
  Giacomini 1/2 needs to install the short ejector rod accessory to the bottom of the controller, please put the accessories directly on the valve and press hard to make the accessories and valve stunk, and then screw into ME167 driver.

TRV network paring:
Rotate the knob to adjust the temperature of the “OF” state, press and hold the knob for 5 seconds to enter the network configuration mode, WIFI icon start fast flashing, then connect it with zigbee gateway as the following instruction.

Gateway distribution network
Greenlight one and red light fast flashing, and it has entered the state of network distribution. (Refer to operating instructions of the gateway for the network configuration status of the gateway.)

APP Connection Instruction

Before configuring WIFI, please make sure your phone is connected to 2.4GHz WIFI.

1. Use your mobile phone to scan the QR code below to download the “Tuya Smart” app.
2. Open the “Tuya Smart” app and click “Add Device” as shown below.
3. After clicking “Gateway Control” select and click “Router (Gateway)” as shown in the figure below.
4. Click “Confirm the indicator is on” and then click “Next” as shown in the figure below.
5. After searching for the gateway, click “+ ” as shown in the figure below.
6. The mobile phone enters the device search the connection mode as shown in the figure below.
7. The mobile device is successfully connected to the gateway, click “Done” as shown in the figure below.
8. Click “Add sub-devices” as shown in the figure below.
9. Click “LED already blink” as shown in the figure below.
10. After searching for the device, click “DONE” as sown in the figure below.
11. Click the added device as shown in the figure below.
12. Enter the main interface as shown in the figure below.

Device sharing instructions

1. Click as shown below.
2. Click “Share Device” as shown below.
3. Click “Add Sharing” as shown below.
4. After entering the account number, click “Done” as shown below.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

FAQ

Q: How do I know if the battery is low?
A: When the low voltage warning symbol is displayed on the screen, it indicates that the battery voltage is too low and needs replacement.

Q: How to adjust the temperature setting?
A: Rotate the knob to adjust the temperature displayed on the LED screen to your desired setting.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>