Avatto SWPPD86-01OG In Wall Smart Scoket User Manual
- June 14, 2024
- AVATTO
Table of Contents
IN Wall Smart Scoket
User Manual
Specifications
Model: SWPPD86-01OG/SEPPD86-01FOG
Input voltage: AC 100-240V
Rated Frequency: 50/60Hz
Max.Current: 16A
Max.Power: 3000W
Output: DC 20W Max
USB-A: DC5V/3A, 9V/2A, 12V/1.5A
USB-C: DC5V/3A, 9V/2.22A, 12V/1.67A
USB-A + USB-C: 5V/3.4A Max
Remote Control: Bluetooth
WiFi: IEEE 802.11 b/g/n
Wireless standard: Wi-Fi 2.4G
Product Introduction
The lighting fixture controlled by the Wi-Fi in-wall smart socket must not
exceed 3000 watts.
The smart socket is designed only for single-pole use and Neutral Wire
required.
1.1 Indicator description
| Red light:
the state of the smart socket is on
---|---
| Blue light:
the smart socket is off
| Green light:
1. Wi-Fi distribution network indicator
2. Remote control matching indicator light
1.2 Method of restoring factory state
Press and hold the smart socket button for 10 seconds until the smart socket
indicator is blinking.
Remote pairing and deletion methods(UK)
One smart socket seitch can be paired with four remotes at most. One remote
key can only control one smart socket.
-
How to pair the remote with smart socet?:
Step 1. Press and hold the smart socket buttonfor 5 seconds until the socket indicator change to blinking slowly
Step 2. Press and hold the remote key “A” or “B” until the smart socket indicator stop blinking, paired successfully.
-
How to delete the remote with smart socet?:
Press and hold the remote key for 10 seconds until the smart socket indicator flashes rapidly for 2 seconds, release your finger, then the paired key is invaild now.
Smart Socket Installation
2.1 Tools you need
2.2 Connect the Smart Socket wires
IMPORTANT:
Make sure the power is turned OFF before you proceed. Your existing wires may
have different colors than those shown.
Install APP
Simplified steps to install the smart life App on your smart device and pair with Amazon Alexa and Google Assistant using smart life App on Apple Store or Google Play marketplace. Compatible with any smart phone or tablet including both Android and IOS systems.
3.1 Download Smart life App
Download smart socket from Apple Store or Goolge Play Store or scan the QR
code below to install the smart life APP for either iOS or Android.
http://smartapp.tuya.com/smartlife
3.2 Register an account in Smart life APP
- Open smart life APP into account registration page, click on the “Register”
- At the registration page, select your region and enter the email to create a new account.[Phone number is not available]
- After successful registration, you can add device on your APP now.
Add devices
Step 1. After login to smart life APP, click on “+” to add devices. Select
“Electrical” -> “Socket” catagory, tap “Socke[Wi-Fi]” product icon.
4.1 Add New WiFi Device
- Connect your phone to the local WiFi
- Press the switch button for 10 seconds till the light flashes to reset
- Tap on “+” in the homepage of your “smart Life” App and select “Smart Socket”
- Enter WiFi password and confirm
- Wait until the configuration is complete
4.2 Add New Zigbee Device
- Ensure that the devise is in fast flashing state
- Open the Tuya ZigBee Smart Gateway
- In the Zigbee smart gatewayclick to adda sub-device
- Discover the device and add it, the addition is successful
Step 2. Select the Device Work Wi-Fi and enter the password, then start the configuration of the device. Follow the in-APP instruction to connect the smart socket to your Wi-Fi network.
- Please make sure the Wi-Fi is strong & 2.4 GHZ wireless band.
- Keep your mobile device close to the smart socket until setup is completed.
Step 3. Active the smart socket to Wi-Fi connection mode smart life APP
supports two types of configuration modes:
EZ mode and AP mode.
EZ mode: Turn off the luminaire first. The socket indicator will be blue.
Press and hold the socket button for 10 seconds and release. The indicator
light will blink rapidly.
[About twice per second] .
AP mode: Under EZ mode, continue to press and hold the socket button for 10
seconds and release, the socket indicator will blink slowly. [About once 2
seconds].
If the socket can not be paired in EZ mode [blink rapidly], please change to
AP mode [blink slowly]. After entering the “Add Device” page , confirm whether
the Smart Socket is EZ mode.
Step 4. “Device added Successfully” will be displayed after a successful
operation.
Rename the device
After the device be added successfully, click the device description text to
modify device name. The name of the device is recommended to use easy
pronunciation of the English words.
Control Your Smart Socket with Amazon Alexa/Google Assistant
- Tap the edit menu of the smart socket panel
- Tap the 3rd-party control icon to be operated
- Sign in with your Amazon Alexa or Google Home account.
Now you can use your voice to control the light:
Alexa, turn on Smart Socket
Alexa, turn off Smart Socket
or
Hey Google, turn on Smart Socket
Hey Google, turn off Smart Socket