cudy GS1008PS2 8 Port Switch Installation Guide

cudy GS1008PS2 8 Port Switch

Specifications

• Model: GS1008PS2
• Standards: IEEE802.3 / IEEE802.3u / IEEE802.3x / IEEE802.3af/at
• Power over Ethernet (PoE): IEEE802.3at (30W) and IEEE802.3af (15.4W)
• Power Input: AC 100-240V 50-60Hz, 52V ~ 2.3A, 120W
• Dimensions: 220mm x 161mm x 44mm

Product Usage Instructions

DIP Explanation

The DIP switch on the GS1008PS2 can be set to:

• Default Extend: Common mode for all interfaces with a transmission distance of less than 100 meters at adaptive rates.
• Link Extension: Force 10M on ports 7-8 for link extension up to 250M (enable POE watchdog).

LED and Interface Explanation

• PWR LED: Indicates power status.
• 1-10 Green Light (Link &Data):
  • ON: Link normal
  • OFF: Link blocked
  • Flashing: Data transmitting

Hardware Connection

Physical Appearance

Specifications

• Model
  GS1008PS2

• PoE Standard
  IEEE802.3 / IEEE802.3u

• POE port output
  IEEE802.3x / IEEE802.3af/at

• PoE Protocol
  IEEE802.3at (30W) and IEEE802.3af (15.4w)

• Output
  Power over spare pairs 1/2(+) , 3/6 (-)

• Input Voltage
  AC 100-240 V 50-60Hz

• Supply Power
  52V ~ 2.3A

• Total Power
  120W

• Dimension(L×W×H)
  220mm161mm44mm

• Bandwidth
  20Gbps

• Pack forward rate
  14.88Mpps

• Memory cache
  448Kb

• MAC address
  2K

• Jumbo Frame
  9216bytes

• Working Environment

  • Working Temperature: -10~50°C
  • Storage Temperature: -40~70°C
  • Working Humidity: 10%~90%, non-condensing
  • Storage Temperature: 5%~90%, non-condensing

DIP Explanation

LED and Interface Explanation

FAQ (Frequently Asked Questions)

Q: Where can I find the EU declaration of conformity for the GS1008PS2?
A: The original EU declaration of conformity can be found at www.cudy.com

Q: How can I contact support for the GS1008PS2?
A: You can reach out to support via email at support@cudy.com

Q: What are the power input requirements for the GS1008PS2?
A: The GS1008PS2 requires an AC input of 100V-240V at 50-60Hz.

EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.cudy.com/

Email: support@cudy.com

www.cudy.com

References

• Cudy, Your Home and Business Networking Solutions Provider
• Cudy, Your Home and Business Networking Solutions Provider

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>