DONGGUAN W30 TWS Bluetooth Earphones User Guide

DONGGUAN W30 TWS Bluetooth Earphones

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved for uncontrolled environment
• Operating Distance: Minimum 0cm between radiator and body

Product Usage Instructions

Installation:

1. Place the device on a stable surface.
2. Ensure there is a minimum distance of 0cm between the radiator of the device and your body.
3. Connect the necessary cables to power on the device.

Operation:

1. Power on the device using the designated button.
2. Follow the user manual for specific operation instructions related to your desired functions.
3. Ensure the device does not cause harmful interference and accepts any received interference.

Maintenance:

1. Keep the device clean and free from dust.
2. Avoid exposing the device to extreme temperatures or moisture.
3. Follow any specific maintenance guidelines provided in the user manual.

Frequently Asked Questions (FAQ)

Q: Can I modify the device for additional features?
A: Any changes or modifications not approved by the manufacturer may void your warranty and authority to operate the equipment. It is recommended to use the device as intended.

Q: What should I do if the device is not functioning properly?
A: Check the power source, connections, and refer to the user manual for troubleshooting steps. If issues persist, contact customer support for assistance.

Product Introduction

Product Specifications

• Model:  W30
• Version:  V5.3+BR+EDR+BLE
• Rated Voltage:  DC5V
• Sensitivity:  105÷3dB
• Frequency  20-20000Hz
• Impedance:  320*2
• Microphone:  MEMS Silcone Microphone
• Transmission Distance:  ≤10 Meters
• Earbud Working Time:  ANC On: 3.5H ANC Off: 4H
• Earbud Battery Capacity:  30mAh
• Charging Case Battery Capacity:  300mAh

Usage Instructions

Pairing the earbuds with your smartphone

1. Take the earbuds out of the charging case, they will automatically turn on and pair with each other.
   The LED on the two earphones will flash alternately in orange and blue;

2. The L/R two earphones will automatically pair within 5 seconds. After successful pairing, both earphones will display orange or blue LED flashing alternately, indicating that the earphones are ready to pair with the smartphone;

3. Switch on Bluetooth in your smartphone to search and pair with the name ‘W30’ with a voice prompt Connected. At the same time, the L and R earbuds lights turn off.

Notes:

• The L or R earbuds can be used alone to pair with your smartphone, and thus only mono sound is available.
• When the earbuds restart, they will reconnect to the previous device by default, no manual operation is required.

Function Instructions

Switch mode

• Touch the L or R panel double-click, switch between three modes: ANC, Transparency, and OFF, with voice prompts.

During Music Playback

• Touch the L or R panel ONCE to Play/Pause the music playback.
• Touch the L panel FOUR to skip to the Previous track.Touch the R panel FOUR to skip to the Next track.
• Touch the L panel THREE TIMES to decrease the volume.Touch the R panel THREE TIMES to increase the volume.

During Calls

• Touch the L or R panel ONCE to attend the incoming call / end the call.
• Touch the L or R panel for 2 seconds to reject the incoming call.

Charge the Earbuds & Charging Case

• Put the earbuds into the charging case for automatic charging. When charging the earbuds, the BLUE LED on the earbuds is always on.
• The earbuds show an ORANGE LED blinking when the battery is low.

Power Off

• The earbuds will automatically turn off if they are not connected to a device for 3 minutes.
• Press and hold the touch panels for 7 seconds to turn off. The earbuds show an ORANGE LED blinking until it turns off.

Package list

• Bluetooth earbuds (2 PCS)
• Charging case
• USB charging cable
• Instruction

Cautions

1. The earbuds should be stored in a dry and ventilated environment to avoid oil, water, steam, moisture, and dust.
2. Avoid using stimulants, organic solvents, or items containing these ingredients to clean the earbuds.
3. Use the earbuds according to the specified requirements correctly and consider the environmental impact on the earbuds. To ensure a smooth connection, it is recommended to keep the distance between the phone and earbuds within 10 meters.
4. If there are any issues during the earbuds’ connection, do not disassemble the earphones or their accessories without authorization, as this will void the warranty.
5. When recharging the earbuds, use the standard USB charging cable or the one specified by the company to ensure compatibility.
6. To ensure normal use of the earbuds, make sure that the earbuds battery is sufficiently charged

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates,uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>