EVGA 750GQ Power Supply User Manual
- August 22, 2024
- EVGA
Table of Contents
EVGA 750GQ Power Supply
Introduction
Premium Power
Thank you for purchasing an EVGA® GQ 80 PLUS® Gold series power supply. The 650GQ/750GQ/850GQ/ 1000GQ is a high-quality power supply that offers great value to gamers/system builders. The modular design provides custom cable configurations for any application, and due to the ultra-silent Fluid Dynamic Bearing 135mm fan, the 650GQ/750GQ/850GQ/1000GQ series reduces heat during heavy load while keeping the decibel level down. Designed with stability and durability in mind, the 650GQ/750GQ/850GQ/1000GQ series is the perfect choice to power your systems.
Safety Information
- WARNING 1: This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will void the product’s warranty. EVGA will not be responsible for any result of improper use, including but not limited to, any use of the product outside of its intended purpose or use inconsistent with the warranty terms available online. (Warranty information is available at www.evga.com/support/warranty and this manual is available at www.evga.com/manuals).
- WARNING 2: Only use included cables or cables purchased from EVGA.com that are specifically labeled for your PSU.
Using incorrect cables runs the risk of catastrophic failure.
What’s in the Box
Included with your EVGA 650GQ/750GQ/850GQ/1000GQ power supply are the following items for proper installation and optional testing:
650GQ
- (1) EVGA Power Supply
- (1) EVGA Manual
- (4) Mounting Screws
- (1) 20+4-Pin ATX Cable
- (2) 8(4+4)-Pin EPS/ATX 12V CPU Cables
- (2) 2 x 8(6+2)-Pin PCI-E VGA Cables
- (3) 3 SATA Cables
- (1) 3 Molex Cable
- (1) Molex to FDD Adapter
- (1) Power Cord Cable (optional)
750GQ
- (1) EVGA Power Supply
- (1) EVGA Manual
- (4) Mounting Screws
- (1) 20+4-Pin ATX Cable
- (2) 8(4+4)-Pin EPS/ATX 12V CPU Cables
- (2) 8(6+2)-Pin PCI-E VGA Cables
- (2) 2 x 8(6+2)-Pin PCI-E VGA Cables
- (3) 3 SATA Cables
- (1) 3 Molex Cable
- (1) Molex to FDD Adapter
- (1) Power Cord Cable (optional)
850GQ
- (1) EVGA Power Supply
- (1) EVGA Manual
- (4) Mounting Screws
- (1) 20+4-Pin ATX Cable
- (2) 8(4+4)-Pin EPS/ATX 12V CPU Cables
- (4) 2 x 8(6+2)-Pin PCI-E VGA Cables
- (3) 3 SATA Cables
- (1) 3 Molex Cable
- (1) Molex to FDD Adapter
- (1) Power Cord Cable (optional)
1000GQ
- (1) EVGA Power Supply
- (1) EVGA Manual
- (4) Mounting Screws
- (1) 20+4-Pin ATX Cable
- (2) 8(4+4)-Pin EPS/ATX 12V CPU Cables
- (2) 8(6+2)-Pin PCI-E VGA Cables
- (4) 2 x 8(6+2)-Pin PCI-E VGA Cables
- (3) 4 SATA Cables
- (1) 3 Molex Cable
- (1) Molex to FDD Adapter
- (1) Power Cord Cable (optional)
Features
-
STABLE POWER
The GQ series has outstanding electrical performance with ultra stable voltage and extremely clean power output. This can help you achieve the highest possible overclock (optional) and provide the most stable and reliable power to all components. The GQ series also has high efficiency up to 90% (115VAC) / 92% (220VAC~240VAC) efficiency and is 80 PLUS® GOLD certified. -
ECO THERMAL CONTROL SYSTEM
The EVGA ECO Intelligent Thermal Control System provides silent operation at low loads, improved efficiency and longer life span of the fan. Enabled by a simple switch directly on the power supply, the “No Fan Spin” feature is ideal for users looking to reduce ambient noise overall. Save on energy costs and unnecessary fan usage with the EVGA ECO Thermal Control System. -
TOP QUALITY PROTECTIONS
The GOLD series comes equipped with the most comprehensive protection set possible, including Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Over Current Protection (OCP), and Over Temperature Protection (OTP). This product is also covered by an exceptional 5-year warranty and EVGA’s legendary customer service and support. -
SUPERIOR BUILD QUALITY
The GQ series is built to the highest standards, using 100% Japanese capacitors rated at 105 degrees Celsius and high quality brand-name semiconductor components for the highest performance and reliability. The Ultra Quiet 135mm Fluid Dynamic Bearing fan provides adequate cooling to allow near silent operation. -
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures with better airflow overall and provide a clean look to any system. Modular PSU designs allow the user to disconnect the cables from the power supply side if they are not needed for the specific configuration. This can help free up space inside the case and improve cable management as well as airflow throughout the system.
Installation
-
Remove the power supply from its packaging.
-
(Optional) Using the provided PSU testing tool, connect the 24-Pin cable to the PSU, then attach the testing tool to the 24-Pin cable. Connect the ATX power cable to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan to use. Once connected, turn the power switch to the ON position. (If the ECO mode is set to ON, the fan will not spin)
Please note: If you are using a water cooling configuration, this testing tool provides a simple, safe, option for bleeding/draining/testing water cooling components without the need of a paperclip or other device. -
Use the screws provided with your case to install the power supply into your computer. NOTE: It is recommended to install the power supply with the fan facing down. However, if your case places the power supply at the bottom of the case and there are no ventilation holes available, it may be best to install the power supply with the fan facing up for greater efficiency and reliability.
-
Connect the 24-Pin ATX cable to the PSU and the motherboard.
-
Connect the 4+4-Pin EPS12V cable to the motherboard. (Optional) – If you plan on extreme overclocking and your motherboard supports additional 8-Pin or 4-Pin CPU power connectors, connect the second 4+4-Pin EPS12V cable. This is only needed for heavy overclocking or for Dual CPU motherboards.
-
Connect the 6/6+2-Pin PCI-E cables to your graphics card(s).
NOTE: Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin connector without first detaching the two extra pins. -
Connect SATA power cables to all data drives or optical drives (hard drives, solid state drives, optical drives).
-
Connect the peripheral “Molex” 4-Pin connectors for fans, pumps, legacy components and other devices/adapters.
-
Connect the AC power cord to your power supply and to the wall. Check all connections to assure a solid connection and turn the power switch on the power supply to the ON position.
TROUBLESHOOTING
I see there are more than four screw holes on the back of the power supply, but the packaging only offers (4) screws, are some missing?
- Nothing is missing; you will only need to attach the EVGA power supply to the case with four screws. The power supply offers more than (4) holes to provide optimal compatibility for today’s varied case designs.
My EVGA Power Supply includes (2) EPS cables for my motherboard, do I need to connect up both?
- Motherboards only require (1) 4+4 or 8-Pin EPS connection. On some models, an additional 4+4-Pin or 8-Pin connection on the motherboard may be found for dual CPU configurations or for extreme overclocking. If your motherboard supports dual 4+4-Pin EPS connections, please refer to your motherboard manufacturer’s manual for details on the proper function and power of the EPS connections.
What is the ECO Thermal Control System?
- The ECO Thermal Control System, when enabled, allows the fan on your EVGA power supply to shut off during low to moderate operation loads. The EVGA power supply’s fan will automatically turn back on when needed, based on the temperature the power supply reaches. The fan will also increase in RPM when needed, based on the load operation being requested from the components connected. This prevents unnecessary rotation, reduces ambient noise levels and will increase the life span of the fan due to the fan not spinning when not required.
Please Note: If the ECO Thermal Control is disabled the fan will always spin, even at low loads. The fan will also increase in RPM as needed automatically, based on the power draw from connected components.
What if I want to use power adapters for my graphics card(s)/motherboard/peripherals?
- EVGA always recommends the use of direct power connections from the power supply to power all components.
Does it matter which end of the cable I plug into the power supply?
- Yes, the connections going to the power supply will not have “break downs” like the EPS (CPU) has 4+4 on one side and full 8-Pin on the other. Check each cable as it is labeled appropriately to match the power supply side, and connect only the same ‘‘matching” cable directly to the power supply as referenced on each connector.
If I have an issue or a question, can I get support?
- ALL EVGA products are backed by top tier warranties as well as 24/7 technical support. Support can be reached for your power supply at:
- USA: +1-888-881-3842 option 1, option 3. or contact us via email at support@evga.com.
- Europe: +49 89 189 049 11 or by email via eu.evga.com/support.
SPECIFICATIONS
EVGA 650GQ Cable Configuration
Modular Connector | Cables | Cable Color |
---|---|---|
Hard Lined | MB | 1 x ATX 20+4-Pin |
Black
CPU1|
2 x EPS/ATX12V 8(4+4)-Pin
CPU2
VGA1|
2 x PCI-E 8(6+2)-Pin x 2
VGA2
SATA1|
3 x SATA 5-Pin x 3
SATA2
SATA3
PERIF1| 1 x Molex 4-Pin x 3
FDD| 1 x Molex to FDD Adapter
EVGA 750GQ Cable Configuration
Modular Connector | Cables | Cable Color |
---|---|---|
Hard Lined | MB | 1 x ATX 20+4-Pin |
Black
CPU1|
2 x EPS/ATX12V 8(4+4)-Pin
CPU2
VGA1|
2 x PCI-E 8(6+2)-Pin
2 x PCI-E 8(6+2)-Pin x 2
VGA2
VGA3
VGA4
SATA1|
3 x SATA 5-Pin x 3
SATA2
SATA3
PERIF1| 1 x Molex 4-Pin x 3
FDD| 1 x Molex to FDD Adapter
Dimensions: 85mm (H) x 150mm (W) x 165mm (L)
EVGA 850GQ Cable Configuration
Modular Connector | Cables | Cable Color |
---|---|---|
Hard Lined | MB | 1 x ATX 20+4-Pin |
Black
CPU1| 2 x EPS/ATX12V 8(4+4)-Pin
CPU2
VGA1|
4 x PCI-E 8(6+2)-Pin x 2
VGA2
VGA3
VGA4
SATA1|
3 x SATA 5-Pin x 3
SATA2
SATA3
PERIF1| 1 x Molex 4-Pin x 3
FDD| 1 x Molex to FDD Adapter
EVGA 1000GQ Cable Configuration
Modular Connector | Cables | Cable Color |
---|---|---|
Hard Lined | MB | 1 x ATX 20+4-Pin |
Black
CPU1| 2 x EPS/ATX12V 8(4+4)-Pin
CPU2
VGA1|
2 x PCI-E 8(6+2)-Pin
4 x PCI-E 8(6+2)-Pin x 2
VGA2
VGA3
VGA4
VGA5
VGA6
SATA1|
3 x SATA 5-Pin x 4
SATA2
SATA3
PERIF1| 1 x Molex 4-Pin x 3
FDD| 1 x Molex to FDD Adapter
Dimensions: 85mm (H) x 150mm (W) x 180mm (L)
EVGA 650 / 750 / 850 / 1000GQ Specifications
| 650W GOLD| +50°C ambient @ full load|
---|---|---|---
AC Input|
100-240 VAC, 10A, 60/50 Hz
DC Output| +5V| +3.3V| +12V| -12V| +5Vsb
MAX output, A| 24A| 24A| 54A| 0.5A| 3A
Combined, W| 120W| 648W| 6W| 15W
Output power, Pcont| 650W @ +50°C
| 750W GOLD| +50°C ambient @ full load|
---|---|---|---
AC Input|
100-240 VAC, 10A, 60/50 Hz
DC Output| +5V| +3.3V| +12V| -12V| +5Vsb
MAX output, A| 24A| 24A| 62.4A| 0.5A| 3A
Combined, W| 120W| 748.8W| 6W| 15W
Output power, Pcont| 750W @ +50°C
| 850W GOLD| +50°C ambient @ full load|
---|---|---|---
AC Input|
100-240 VAC, 14A, 60/50 Hz
DC Output| +5V| +3.3V| +12V| -12V| +5Vsb
MAX output, A| 24A| 24A| 70.8A| 0.5A| 3A
Combined, W| 120W| 849.6W| 6W| 15W
Output power, Pcont| 850W @ +50°C
| 1000W GOLD| +50°C ambient @ full load|
---|---|---|---
AC Input
|
100-240 VAC, 16A, 60/50 Hz
DC Output| +5V| +3.3V| +12V| -12V| +5Vsb
MAX output, A| 24A| 24A| 83.3A| 0.5A| 3A
Combined, W| 120W| 999.6W| 6W| 15W
Output power, Pcont| 1000W @ +50°C
Over Voltage Protection, Under Voltage Protection, Short Circuit Protection, Over Power Protection, Over Current Protection, Over Temperature Protection.
FREQUENTLY ASKED QUESTIONS
What is the EVGA 750GQ Power Supply?
The EVGA 750GQ Power Supply is a high-performance power supply unit (PSU) designed for personal computers, providing 750 watts of power to ensure stable and reliable system operation.
What are the dimensions of the EVGA 750GQ Power Supply?
The EVGA 750GQ measures 6.5 x 5.91 x 3.35 inches, fitting standard ATX cases.
How much does the EVGA 750GQ Power Supply weigh?
The power supply weighs approximately 3.1 kilograms, which is typical for a unit of its wattage and features.
What is the output wattage of the EVGA 750GQ Power Supply?
The EVGA 750GQ provides 750 watts of output power, making it suitable for high-performance PCs and gaming setups.
What form factor is the EVGA 750GQ Power Supply?
The EVGA 750GQ is an ATX form factor power supply, compatible with most standard computer cases.
What type of cooling method does the EVGA 750GQ Power Supply use?
It uses air cooling, featuring a built-in fan to keep the power supply cool during operation.
What connector type does the EVGA 750GQ Power Supply use?
The power supply has a 24-pin connector type, which is standard for connecting to the motherboard.
What is the system bus connector type for the EVGA 750GQ Power Supply?
The EVGA 750GQ includes a 6+2 pin system bus connector, providing flexibility for connecting to graphics cards.
What is the price of the EVGA 750GQ Power Supply?
The EVGA 750GQ is priced at $94.99, reflecting its quality and performance features.
What is the warranty period for the EVGA 750GQ Power Supply?
The power supply comes with a 5-year warranty, offering extended protection and reliability.
What types of devices is the EVGA 750GQ Power Supply compatible with?
It is compatible with personal computers, making it suitable for a wide range of desktop builds and upgrades.
How does the EVGA 750GQ Power Supply handle power delivery?
The 750GQ ensures stable and efficient power delivery to all components, reducing the risk of power-related issues and improving system stability.
What kind of cables are included with the EVGA 750GQ Power Supply?
The power supply usually comes with modular cables, allowing for a cleaner build and improved airflow by connecting only the cables needed.
Why is my EVGA 750GQ Power Supply not powering on my PC?
Ensure that the EVGA 750GQ Power Supply is properly connected to the motherboard and all necessary power cables are securely attached. If the issue persists, check the power outlet and consider testing the power supply in another system.
What should I do if my EVGA 750GQ Power Supply is making a clicking or buzzing noise?
A clicking or buzzing noise from the EVGA 750GQ Power Supply could indicate a faulty fan or internal component. Turn off the power supply immediately and inspect for any visible damage.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:EVGA 750GQ Power Supply User Manual
REFERENCE:EVGA 750GQ Power Supply User Manual- Device.Report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>