EVGA 700 GE Power Supply User Guide
- June 16, 2024
- EVGA
Table of Contents
EVGA 700 GE Power Supply
Specifications
- AC Input: 100-240V~, 7-3.5A, 60/50Hz
- +3.3V Output: 22A
- +5V Output: 22A
- +12V Output: 41.7A
- -12V Output : 0.3A
- +5Vsb Output: 3A
- Max Output Power : 500W
- Combined Output Power : 500W
- Dimensions: 86mm (H) x 150mm (W) x 140mm (L)
- Cable Color: Black
Features
- No user-serviceable parts inside
- Safety Information: Opening the casing presents a risk of electrocution and will void the product’s warranty
- Installation: The power supply should be installed with the fan facing down for optimal efficiency and reliability, unless the case places the power supply at the bottom with no ventilation holes available, in which case, it may be best to install the power supply with the fan facing up
- Protection: Over Voltage Protection (OVP), Under Voltage Protection (UVP), Short Circuit Protection (SCP), Over Power Protection (OPP), Over Current Protection (OCP), Over Temperature Protection (OTP)
Introduction
Premium Power
The EVGA GE Series brings EVGA ECO Mode to hardline power supplies for the
first time. In addition to 80 PLUS® Gold efficiency, GE power supplies have low
ripple and noise, low power consumption, and tight voltage regulation for
unwavering stability and to keep performance-critical components functioning
reliably. With EVGA ECO Mode to maintain complete silence at low to medium
loads, the EVGA GE Series allows you to enjoy your PC in peace and quiet.
Safety Information
WARNING: This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will void the product’s warranty. EVGA will not be responsible for any result of improper use, including but not limited to, any use of the product outside of its intended purpose or use inconsistent with the warranty terms available online. (Warranty information is available at www.evga.com/support/warranty and this manual is available at www.evga.com/manuals).
Features
STABLE POWER
The GE series has outstanding electrical performance with ultra-stable voltage
and extremely clean power output. This can help you achieve the highest
possible overclock (optional) and provide the most stable and reliable power
to all components. The GE series also provides up to 90% (115V~) / 92% (230V~)
efficiency and is 80 PLUS® GOLD certified.
TOP QUALITY PROTECTIONS
- The GE series comes equipped with the most comprehensive protection set possible, including Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Over Current Protection (OCP), and
- Over Temperature Protection (OTP). This product is also covered by a 5-year warranty and EVGA’s legendary customer service and support.
ECO THERMAL CONTROL SYSTEM
The EVGA ECO Intelligent Thermal Control System provides silent operation at
low loads, improved efficiency, and a longer life span for the fan. Enabled by
a simple switch directly on the power supply, the “No Fan Spin” feature is
ideal for users looking to reduce ambient noise overall. Save on energy costs
and unnecessary fan usage with the EVGA ECO Thermal Control System.
SUPERIOR BUILD QUALITY
The GE series is built to the highest standards, using a Japanese main
capacitor rated at 105 degrees Celsius and high-quality brand-name
semiconductor components for the highest performance and reliability.
Installation
-
Remove the power supply from its packaging.
-
Use the screws provided with your case to install the power supply into your computer.
NOTE: It is recommended to install the power supply with the fan facing down. However, if your case places the power supply at the bottom of the case and there are no ventilation holes available, it may be best to install the power supply with the fan facing up for greater efficiency and reliability. -
Connect the 24-pin ATX cable to the motherboard.
-
Connect the 4+4-Pin EPS12V cable to the motherboard.
-
Connect the 6/6+2-Pin PCI-E cables to your graphics card(s) NOTE: Do not attempt to plug an 8-pin PCI-E cable into a 6-pin connector without first detaching the two extra pins.
-
Connect SATA power cables to all data drives or optical drives (hard drives, solid state drives, optical drives).
-
Connect the peripheral “Molex” 4-Pin connectors for fans, pumps, legacy components, and other devices/adapters.
-
Connect the AC power cord to your power supply and to the wall. Check all connections to ensure a solid connection and turn the power switch on the power supply to the ON position.
Q&A
- Q: I see there are more than four screw holes on the back of the power supply, but the packaging only offers (4) screws, are some missing?
- A: Nothing is missing; you will only need to attach the EVGA power supply to the case with four screws. The power supply offers more than (4) holes to provide optimal compatibility for today’s varied case designs.
- Q: What is the ECO Thermal Control System?
- A: The ECO Thermal Control System, when enabled, allows the fan on your EVGA power supply to shut off during low to moderate operation loads. The EVGA power supply’s fan will automatically turn back on when needed, based on the loading the power supply reaches. The fan will also increase in RPM when needed, based on the load operation being requested from the components connected. This prevents unnecessary rotation, reduces ambient noise levels, and will increase the life span of the fan due to the fan not spinning when not required. Please Note: If the ECO Thermal Control is disabled the fan will always spin, even at low loads. The fan will also increase in RPM as needed automatically, based on the power drawn from connected components.
- Q: If I have an issue or a question, can I get support?
- A: ALL EVGA products are backed by top-tier warranties as well as technical support. Support can be reached for your power supply at :
- USA: +1-888-881-3842 option 1, option 3. or contact us via email at support@evga.com
- Europe : +49 89 189 049 11 or by email via eu.evga.com/support
500 / 600 / 700 / 800 GE Cable Configuration
500 GE
| Connector| Cables| Cable Color
---|---|---|---
MB| 1 x ATX 24-Pin| ****
Black
CPU| 1 x EPS/ATX12V 8(4+4)-Pin
VGA| 1 x PCI-E 8(6+2)-Pin x 2
SATA| 2 x SATA 5-Pin x 3
PERIF / FDD| 1 x Molex 4-Pin x 3 + FDD X 1
600 GE
| Connector| Cables| Cable Color
---|---|---|---
MB| 1 x ATX 24-Pin| ****
Black
CPU| 1 x EPS/ATX12V 8(4+4)-Pin
VGA| 2 x PCI-E 8(6+2)-Pin
SATA| 2 x SATA 5-Pin x 3
PERIF / FDD| 1 x Molex 4-Pin x 3 + FDD X 1
700 GE
| Connector| Cables| Cable Color
---|---|---|---
MB| 1 x ATX 24-Pin| ****
Black
CPU| 1 x EPS/ATX12V 8(4+4)-Pin
VGA| 2 x PCI-E 8(6+2)-Pin x 2
SATA| 2 x SATA 5-Pin x 3
PERIF / FDD| 1 x Molex 4-Pin x 3 + FDD X 1
800 GE
| Connector| Cables| Cable Color
---|---|---|---
MB| 1 x ATX 24-Pin| ****
Black
CPU| 2 x EPS/ATX12V 8(4+4)-Pin
VGA| 2 x PCI-E 8(6+2)-Pin x 2
SATA| 2 x SATA 5-Pin x 4
PERIF / FDD| 1 x Molex 4-Pin x 3 + FDD X 1
Dimensions: 86mm (H) x 150mm (W) x 140mm (L)
| 500 GE|
---|---|---
AC Input| 100-240V~, 7-3.5A, 60/50Hz
DC Output __| +3.3V| +5V| +12V| -12V| +5Vsb
MAX output, A| 22A| 22A| 41.7A| 0.3A| 3A
Combined, W| 120W| 500W| 3.6W| 15W
Output power, Pcont| 500W
| 600 GE|
---|---|---
AC Input| 100-240V~, 8-4A, 60/50Hz
DC Output __| +3.3V| +5V| +12V| -12V| +5Vsb
MAX output, A| 22A| 22A| 50A| 0.3A| 3A
Combined, W| 120W| 600W| 3.6W| 15W
Output power, Pcont| 600W
****| 700 GE|
---|---|---
AC Input| 100-240V~, 10-5A, 60/50Hz
DC Output __
| +3.3V| +5V| +12V| -12V| +5Vsb
MAX output, A| 22A| 22A| 58.3A| 0.3A| 3A
Combined, W| 120W| 700W| 3.6W| 15W
Output power, Pcont| 700W
****| 800 GE|
---|---|---
AC Input| 100-240V~, 10-5A, 60/50Hz
DC Output __
| +3.3V| +5V| +12V| -12V| +5Vsb
MAX output, A| 22A| 22A| 66.7A| 0.3A| 3A
Combined, W| 120W| 800W| 3.6W| 15W
Output power, Pcont| 800W
Protection: Over Voltage Protection (OVP), Under Voltage Protection (UVP), Short Circuit Protection (SCP), Over Power Protection (OPP), Over Current Protection (OCP), Over Temperature Protection (OTP).
FCC
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
FAQ
- Q: Are there any user-serviceable parts inside the power supply?
- A: No, this power supply has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will void the product’s warranty.
- Q: How should I install the power supply?
- A: It is recommended to install the power supply with the fan facing down for optimal efficiency and reliability. However, if your case places the power supply at the bottom with no ventilation holes available, it may be best to install the power supply with the fan facing up.
- Q: What protections does the power supply have?
- A: The power supply has Over Voltage Protection (OVP), Under Voltage Protection (UVP), Short Circuit Protection (SCP), Over Power Protection (OPP), Over Current Protection (OCP), and Over Temperature Protection (OTP).
References
- EVGA - BR - Suporte - Manuais de Produtos
- EVGA - BR - Warranty - Graphics Cards
- EVGA - DE - Garantie - Grafikkarten
- EVGA - EU - Support - Home
- EVGA - Support - Product Manuals
- EVGA - Warranty - Graphics Cards
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>