EVGA 600-PL-2816-LR PowerLink All NVIDIA Founders Edition Installation Manual
- June 12, 2024
- EVGA
Table of Contents
EVGA 600-PL-2816-LR PowerLink All NVIDIA Founders Edition
The EVGA Powerlink has one primary function: to make your PC look even more awesome. This adapter allows you to reroute the power inputs for your graphics card, giving you improved case airflow, a lower profile height, and best of all, cleaner wiring setup. It even supports a unique configuration system allowing you to mix and match power input types to match your EVGA graphics card.
WHAT’S IN THE BOX
The following items are included in your EVGA Powerlink box.
- EVGA Powerlink
- 6-Pin VGA Connector
- 1.3mm Allen Wrench (Hex-Key)
- Quick Guide
The EVGA Powerlink comes out of the box preset for a 2×8-Pin power configuration, ideal for your EVGA GTX 1080 FTW or Classified card. This is a modular system and can be configured for 1×6-Pin, 2×6-Pin (second 6-Pin connector sold separately), 1×8-Pin, 2×8-Pin, or 1×8-Pin+1×6-Pin.
To install the EVGA Powerlink, first, make sure the default configuration fits your specific video card. If it does, then first attach both 8-Pin headers on your Powerlink to your PSU, both 8-Pins SHOULD always be used to help prevent an under-power situation that could damage components. Make sure both 8-Pin connectors are attached to your PSU, then attach the EVGA Powerlink to the card, the power connectors should seat the same as a cable Should be from the PSU.
CONFIGURATION CHANGES
A change in your configuration may be necessary depending on your video card. If it is necessary, first verify what connectors you need for your Powerlink to connect to your video card, then remove the rubber covers.
Use the included 1.3mm, Allen, and loosen the front and rear fastener holding on the connector you need to remove or change and remove the connector(s). If you are removing a connector as your video card only has a single power connector, then at this point you can reattach the rubber covers and install the EVGA Powerlink. If you need to install different connector(s) at this time take the included connector and attach it to the Powerlink, and tighten the fasteners. Please remember to tighten BOTH sides of the Powerlink with the included Allen Wrench, or the connector will not sit level, and may suffer from connection problems.
NOTE: If using only one power connector, ensure that you tighten down the empty slot so it does not slide.
NOTE: The connectors on the Powerlink can move to account for the different spacing of many different cards, so it is advised that you align it with the card’s power connectors and tighten the fasteners while the connector is in place to avoid alignment issues.
NOTE: You CANNOT OVERPOWER your card by plugging in both 8 pins on a single 6 or 8-pin card. A card will ONLY pull the power it needs for a given job, so having more power than a card can pull plugged into the Powerlink is in no way a risk.
NOTE: The power adapters on EVGA Powerlink can only be installed in one direction, DO NOT attempt to reverse the direction of the power connectors.
SAFETY NOTE
The EVGA Powerlink is designed to carry up to 300watts or 25amps@+12-volt, and the connectors are NOT connected via wires internally, but by a conductive rail to which all (both PSU side and both potential GPU side) connectors are attached to. This is why it is recommended that you ALWAYS have both 8-Pin connectors attached from the PSU side, to ensure the GPU will have ample power.
FEATURES
-
Enhanced Capacity for Cable Management:
By enabling you to route power lines directly from your graphics card to the Power Supply Unit (PSU) in a manner that is tidier and more organized, the EVGA PowerLink contributes to better cable management and helps improve cable organization. -
Single Slot Design:
The PowerLink is designed with a single tiny slot, which helps to reduce the amount of space needed for cable management. This is especially helpful in cases with a small form factor. -
Connection to the Power Source Directly:
It does this by making a direct connection to the power connections on your NVIDIA Founders Edition graphics card, which guarantees a safe and consistent flow of power to the GPU. -
Modular Design:
Because of its modular architecture, PowerLink gives you the ability to customize the location of the power connectors to accommodate the layout of your case and the way you want the cables to be routed. -
Supports Multiple GPUs:
The EVGA PowerLink was developed to work with multiple graphics processing unit (GPU) installations and gives users the ability to connect the power cords of numerous graphics cards for SLI configurations. -
Improved Thermal Performance and Aesthetics:
The PowerLink eliminates the requirement for additional cables to be located close to the GPU fans, which results in improved airflow and ultimately better GPU cooling. It maintains a cleaner and more organized GPU area, which contributes to an overall more aesthetically pleasing appearance of your computer system. -
Compatible with a Number of Different Graphics Cards Produced by EVGA:
The EVGA PowerLink is often compatible with a wide variety of other models of EVGA GeForce GTX and RTX graphics cards, despite the fact that its major concentration is on NVIDIA Founders Edition graphics cards. -
Simple and quick assembly:
Installing the PowerLink doesn’t need much effort at all. In most cases, it may be attached to the power connectors that are already present on your graphics card without the need for any additional tools or adjustments. -
Features of Protection:
The PowerLink was developed with security in mind, so it guarantees that the correct amount of power will be sent to the GPU at all times, without causing any power loss or overheating problems. -
Decreased Pressure on the Connectors:
The PowerLink helps alleviate strain on the power connectors of the GPU by relocating the power connectors. This could potentially increase the longevity of the graphics card.
FREQUENTLY ASKED QUESTIONS
What is the EVGA 600-PL-2816-LR PowerLink?
The EVGA 600-PL-2816-LR PowerLink is an accessory designed specifically for NVIDIA Founders Edition graphics cards to improve cable management and enhance airflow.
What does the EVGA PowerLink do?
The EVGA PowerLink helps manage power cables more efficiently, allowing you to route them directly from your GPU to the PSU, improving cable organization and airflow.
Is the EVGA PowerLink compatible with all NVIDIA Founders Edition graphics cards?
Yes, the EVGA PowerLink is designed to work with all NVIDIA Founders Edition graphics cards.
How does the EVGA PowerLink improve cable management?
By repositioning the power connectors, the EVGA PowerLink eliminates the need for additional cables near the GPU, resulting in a cleaner cable management setup.
Does the EVGA PowerLink require any tools for installation?
No, the EVGA PowerLink typically does not require any additional tools for installation and attaches directly to the existing power connectors on the graphics card.
Can the EVGA PowerLink be used with SLI configurations?
Yes, the EVGA PowerLink can be used with SLI configurations, allowing you to link power cables from multiple GPUs in the system.
Does the EVGA PowerLink impact GPU performance or overclocking capability?
No, the EVGA PowerLink does not impact GPU performance or overclocking capability as it primarily focuses on cable management and aesthetics.
Does the EVGA PowerLink improve GPU cooling?
Yes, the EVGA PowerLink may improve GPU cooling by reducing cable clutter and allowing for better airflow around the GPU area.
Can the EVGA PowerLink be used with other EVGA graphics card models besides Founders Edition cards?
While it is primarily designed for NVIDIA Founders Edition cards, the EVGA PowerLink is often compatible with various other EVGA GeForce GTX and RTX graphics card models.
Is the EVGA PowerLink a passive or active accessory?
The EVGA PowerLink is a passive accessory, meaning it does not require additional power or active components to function.
Does the EVGA PowerLink come with a user manual for installation?
Yes, the EVGA PowerLink typically comes with a user manual that provides detailed instructions for installation and setup.
Can the EVGA PowerLink be used with custom-designed graphics cards from other manufacturers?
The EVGA PowerLink is specifically designed for NVIDIA Founders Edition cards, but it might be compatible with some custom-designed graphics cards from other manufacturers with similar power connector layouts.
Does the EVGA PowerLink support SLI bridges?
The EVGA PowerLink does not directly support SLI bridges, as its primary function is to improve cable management. However, it can be used alongside SLI bridges if your motherboard and graphics card setup requires them.
Can I use the EVGA PowerLink with older NVIDIA graphics cards?
The EVGA PowerLink is specifically designed for NVIDIA Founders Edition cards, but it may also work with some older NVIDIA graphics cards with compatible power connector layouts.
Does the EVGA PowerLink require any software installation?
No, the EVGA PowerLink is a hardware accessory and does not require any software installation.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:EVGA 600-PL-2816-LR PowerLink All NVIDIA Founders Edition Installation Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>