EVGA XR1 PRO Capture Card User Guide
- June 4, 2024
- EVGA
Table of Contents
- EVGA XR1 PRO Capture Card
- Inside The Box
- Specification
- Control Dial Function
- LED Indications
- Device Layout
- Configuration Set Up for Desktop/ Laptop
- For Game Consoles
- For Video Conference
- Using your EVGA XR1 PRO with OBS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EVGA XR1 PRO Capture Card
Inside The Box
Please check all these items are included.
Specification
- Interface: USB 3.0 Type-C
- Input & Output (Pass Through): HDMI
- Input: 480p / 576p / 720p / 1080p@240fps /
- Pass-Through: 1440p@144fps / 2160p@60fps HDR
- Capture Max Resolution: 2160p@30fps
- Dimension: 130mm x 86.4mm x 32.95mm With the Control Dial
- 130mm x 86.4mm x 24.15mm Without the Control Dial
- Weight: 159g
Control Dial Function
- Up: Select Lighting Effect
- Down: Select Lighting Effect
- Left: Switch to Adjust the Volume of Mic In
- Right: Switch to Adjust Volume of Console Party Link
- Volume Adjustment Mode: Control the Volume of Mic In / Console Party Link
- Lighting Adjustment Mode: Control the LED Lighting Effect / Speed
- Press and Hold 10s: Factory Reset
- Press: Disable / Enable Mic In
LED Indications
- USB 3.0 Mode
- Standby with USB 3.0 Connection Mode
- USB 2.0 Mode
- Standby with USB 2.0 Connection Mode
- Resetting Device
- Mic In Muted
- USB signal issue (No Video)
- USB signal issue (No Support for Up Scale)
- USB signal issue (HDCP)
Device Layout
Configuration Set Up for Desktop/ Laptop
For Game Consoles
For Video Conference
Using your EVGA XR1 PRO with OBS
(Open Broadcaster Software®)
OBS is a free and open-source software solution for video recording and live
to stream and is recommended by EVGA to utilize the EVGA XR1 PRO Capture Card.
You will need to download the OBS software to get started from
https://[obsproject.com/](https://obsproject.com/)download
Once you’ve downloaded and installed OBS, an auto configuration wizard will run
upon opening the program for the first time. It will attempt to find the most
appropriate settings that your PC can handle. You can manually change these
settings later. (Reference the EVGA XR1 PRO Capture Card’s Quick Guide on how
to connect your device to the EVGA XR1 PRO Capture Card and to your streaming
device.) OBS doesn’t capture any video by default, you will need to enable
your EVGA XR1 PRO Capture Card by adding it as a source. Either click on the +
or right-click inside the box labeled “Sources” and then add the device and
select your EVGA XR1 PRO Capture Card.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>