WEARABLE R1 Pro CW Watch User Guide
- August 27, 2024
- Wearable
Table of Contents
WEARABLE R1 Pro CW Watch
Product Information
Specifications:
- Model: CW Watch R1 Pro
- Features: Heart Rate Monitoring, Blood Oxygen Monitoring, Touchscreen Display, Magnetic Charging
- Compatibility: Fitbeing App
- Charging: USB, 5V 1A or above output
Product Usage Instructions:
Wear Your Watch:
For optimal data accuracy, wear the watch approximately two finger-widths from your wrist bone.
Power On:
- Press the Digital Crown until the startup screen appears.
Set up:
- Download and install the Fitbeing app from the app store.
- Pair your CW Watch R1 Pro with the Fitbeing app following the instructions provided.
Start Using:
- Explore touchscreen operations using the crown and button.
- Access features like Notification Center, Control Center, and Tiles for different functionalities.
- Change watch faces and install new watch faces through the Fitbeing app.
- Monitor health metrics automatically and view data in the app.
Charge the Watch:
- Connect the charging cable to a USB power source with an output of 5V 1A or above.
- Attach the other end to the charging contact on the back of the watch.
- The watch will display a charging icon while charging.
Band Installation/Removal:
- To remove the band, lift the spring bar from the groove and gently pull it out.
- To install the band, insert the metal pin at position A, press it into the body, and release the spring bar.
Frequently Asked Questions (FAQ):
Q: How can I access different tiles on the watch?
A: To switch between Suggestions, Activity, Heart Rate, Sleep, Weather, or Workout tiles, swipe left or right on the watch face screen.
Q: What should I do if my watch does not power on?
A: Press the Digital Crown until the startup screen appears. If issues persist, contact customer support for assistance.
CW Watch R1 Pro
User Guide
Your CW Watch R1 Pro
Front
Digital Crown Screen Button Band
Steps for Use
Magnetic Charging Contacts Heart Rate and Blood Oxygen
Back
Magnetic Charging Cable
Charging cable
You can follow these steps to use CW Watch R1 Pro: Wear Power On Set up Start Using
Wear Your Watch
For optimal data accuracy, please observe the following guidelines while
wearing the watch:
Power On
Press the Digital Crown until the startup screen appears.
1. Wear the watch at a position approximately two finger-widths from your wrist bone.
2. For comfort, adjust the band to allow a
Note: If the watch can’t power on, it may be because
Wear Your Watch
Step 1: Download the Fitbeing app. Go to the app store on your phone, search
for Fitbeing, and install it.
· For Android phones, go to the Google Play. · For iPhone, go to the App
Store.
You can also scan the QR code on the left to quickly go to the Fitbeing app in
the app store,
Step 2: Pair with the App
Open the Fitbeing app and select “Set Up a Device” on the home page. Follow the instructions to pair your ” CW Watch R1 APrtoten”tivoinas:Bluetooth. Then you can start 1us.inTgo tphreevwenattccho.nnection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone’s system settings. 2. To ensure successful pairing, please grant
Search via Bluetooth
Get Started
Touchscreen Operation
Crown and Button
Rotate the crown
Support full-screen touch (swipe,
tap, touch and hold)
Swipe up
Swipe left
Swipe right Swipe down
Press 1. Press the digital crown to wake up the screen.
Press the button
2. Press the digital crown to enter the app center
from the watch face screen. 3. Exit an app.
Press the button 1. Press to start Workout
Rotate
quickly. 2. Long press to activate SOS.
Common Functions.
Notification Center
Swipe down on the watch face screen.
Control Center
To access the Control Center, swipe up on the watch face screen. Enable
features like Silent Mode, Sleep Mode, Always-on Display, and
Tiles
To switch quickly between the Suggestions, Activity, Heart Rate, Sleep,
Weather, or Workout tiles,
Change the Watch Face
To change the watch face, press and hold the screen for 1 second to
Change the Watch Face
To change the watch face, press and hold the screen for 1 second to
Health Metrics Measurement
When wearing the watch, it automatically measures health data such as heart
rate, sleep, stress, and activity. You can also view and
Install New Watch Faces
In the Fitbeing app, navigate to the Face Gallery page to pick up your
preferred watch face.
Charge the Watch
To charge the watch, connect the charging cable to a USB power source. Attach
the other end to the charging contact on the back of the watch. The watch will
display a charging icon while it is being charged.
Note: Make sure the USB charging plug is at the same side as the crown. Ensure
to use a standard USB power source with an output of 5V 1A or above. Prior to
charging, ensure to clean the charging
Charge the Watch
Remove band 1. Lift the spring bar from the groove. 2. Push and hold the spring bar. 3. Pull it out gently to remove the Spring bar band.
Install band 1. Insert the metal pin at position “A” in the hole. 2. Push and hold the spring bar. 3. Press the band into the body and release the spring bar. 4. Pull the watch band to confirm the
A
Wear and Care
It is advised to remove the watch for approximately one hour daily. If you
experience discomfort or irritation like redness, tingling, or a burning
sensation, take off the watch and rest your wrist. To maintain hygiene,
regularly clean your watch and wrist, particularly after workouts and
sweating. Avoid using hand soap, shower gel, dishwashing liquid, or
cKleeayniSngpewciipfeics aatsiothnesy can cause skin irritation.
Design for Comfortable Wearing
The inner sweat grooves of the band are specifically designed to minimize skin
irritation resulting from sweat, moisture, and prolonged wear.
Product Name Display Resolution Battery Capacity Wireless Connection Water resistance garde Satellite positioning Geomagnetic sensor Air pressure senso Body Dimension
CW Watch R1 Pro 1.43″ HD AMOLED 466 x 466 370 mAh Bluetooth 5.3 3ATM / Support compass Supports elevation 46.8mm × 46.8mm × 10.8mm
Precautions
· Do not replace the built-in battery yourself as it may pose a safety risk. ·
Avoid forcibly opening the watch case, as it may cause short circuits and
overheating. · Keep the watch away from environments exceeding 60 to prevent
battery leakage or explosion. · While the product complies with 3ATM
waterproof standards, it is not recommended for activities such as bathing,
diving, or water skiing that involve high temperatures, steam, or rapid water
flow. Note that the waterproof performance may be
Help and Guide
Frequently Asked Questions If you encounter any problems while using the
product, you can access the “Profile Help & Support” section in the Fitbeing
app for assistance.
Scan the QR code on the right to access it, or visit help.fitbeing.com to
browse.
FCC Requirement Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1. this device may not cause
harmful interference, and 2. this device must accept any interference
received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.product’s upgrade instructions.
ISED This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions: 1. This
device may not cause interference. 2. This device must accept any
interference, including interference that may cause undesired operation of the
device. L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne
doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>