Creek Wearable R5G Pro CW Watch User Guide

: September 11, 2024
: Creek Wearable

Table of Contents

R5G Pro CW Watch
Specifications:
Product Usage Instructions:
Wear Your Watch:
Power On:
Pairing with Fitbeing App:
Get Started:
Health Metrics Measurement:
Install New Watch Faces:
Charge the Watch:

R5G Pro CW Watch

“`html

Specifications:

Model: CW Watch R5G Pro
Features: Heart Rate Monitoring, Blood Oxygen Monitoring,
Touchscreen, Activity Tracking, GPS
Compatibility: Fitbeing app on iOS and Android devices
Charging: Magnetic charging cable, USB power source with 5V 1A
or above output

Product Usage Instructions:

Wear Your Watch:

For optimal data accuracy, please observe the following
guidelines while wearing the watch:

Wear the watch at a position approximately two finger-widths
from your wrist bone.
Adjust the band for comfort.

Power On:

Press the Digital Crown until the startup screen appears.

Pairing with Fitbeing App:

Step 1: Download and install the Fitbeing app from the app
store on your phone or scan the QR code provided.
Step 2: Open the Fitbeing app, select Set Up a Device, and
follow the instructions to pair your CW Watch R5G Pro via
Bluetooth.

Get Started:

Touchscreen Operation: Utilize crown and button gestures for
various functions like waking up the screen, accessing apps, and
more.
Notification Center: Swipe down on the watch face screen to
view notifications.
Control Center: Swipe up to access features like Silent Mode,
Sleep Mode, Always-on Display, and more.
Tiles: Quickly switch between different tiles for Suggestions,
Activity, Heart Rate, Sleep, Weather, or Workout.

Health Metrics Measurement:

Your watch automatically measures health data such as heart
rate, sleep, stress, and activity. View and track these metrics in
the app.

Install New Watch Faces:

In the Fitbeing app, navigate to the Face Gallery page to choose
and install your preferred watch face.

Charge the Watch:

To charge the watch, connect the magnetic charging cable to a
USB power source with an output of 5V 1A or above. Attach the other
end to the charging contacts on the back of the watch. The watch
will display a charging icon while charging.

Note: Ensure the USB charging plug is on the same side as the
crown. Clean the charging contacts before charging.

FAQ:

Q: How do I change the watch face?

A: Press and hold the screen for 1 second to access the watch
face options in the Fitbeing app and select your preferred
face.

Q: How do I start a workout on the watch?

A: Press the button to start a workout session. Rotate quickly
to navigate through options and long press to activate SOS if
needed.

“`

CW Watch R5G Pro
User Guide

Your CW Watch R5G Pro

Front

Digital Crown Screen Button Band

Steps for Use

Magnetic Charging Contacts Heart Rate and Blood Oxygen
Back

Magnetic Charging Cable
Charging cable

You can follow these steps to use CW Watch R5G Pro: Wear Power On Set up Start Using

Wear Your Watch
For optimal data accuracy, please observe the following guidelines while wearing the watch:

Power On
Press the Digital Crown until the startup screen appears.

1. Wear the watch at a position approximately two finger-widths from your wrist bone.

2. For comfort, adjust the band to allow a

Note: If the watch can’t power on, it may be because

Wear Your Watch
Step 1: Download the Fitbeing app. Go to the app store on your phone, search for Fitbeing, and install it.
· For Android phones, go to the Google Play. · For iPhone, go to the App Store.
You can also scan the QR code on the left to quickly go to the Fitbeing app in the app store,

Step 2: Pair with the App

Open the Fitbeing app and select “Set Up a Device” on the home page. Follow the instructions to pair your ” CW Watch R5G PArtote”nvtiaioBnslu: etooth. Then you can start using t1h. eTwo aptrcehv.ent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone’s system settings. 2. To ensure successful pairing, please grant

Search via Bluetooth

Get Started
Touchscreen Operation

Crown and Button

Rotate the crown

Support full-screen touch (swipe,

tap, touch and hold)

Swipe up

Swipe left

Swipe right Swipe down

Press 1. Press the digital crown to wake up the screen.

Press the button

2. Press the digital crown to enter the app center

from the watch face screen. 3. Exit an app.

Press the button 1. Press to start Workout

Rotate

quickly. 2. Long press to activate SOS.

Common Functions.
Notification Center
Swipe down on the watch face screen.

Change the Watch Face
To change the watch face, press and hold the screen for 1 second to

Control Center
To access the Control Center, swipe up on the watch face screen. Enable features like Silent Mode, Sleep Mode, Always-on Display, and
Tiles
To switch quickly between the Suggestions, Activity, Heart Rate, Sleep, Weather, or Workout tiles,

Change the Watch Face
To change the watch face, press and hold the screen for 1 second to
For outdoor workouts, wait in an open area until the GPS connects. The blinking icon ” ” shows it’s acquiring a location fix and will stop blinking upon success.
Health Metrics Measurement
When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can also view and

Install New Watch Faces
In the Fitbeing app, navigate to the Face Gallery page to pick up your preferred watch face.

Charge the Watch
To charge the watch, connect the charging cable to a USB power source. Attach the other end to the charging contact on the back of the watch. The watch will display a charging icon while it is being charged.
Note: Make sure the USB charging plug is at the same side as the crown. Ensure to use a standard USB power source with an output of 5V 1A or above. Prior to charging, ensure to clean the charging

Charge the Watch

Remove band 1. Lift the spring bar from the groove. 2. Push and hold the spring bar. 3. Pull it out gently to remove the Spring bar band.

Install band 1. Insert the metal pin at position “A” in the hole. 2. Push and hold the spring bar. 3. Press the band into the body and release the spring bar. 4. Pull the watch band to confirm the

A

Wear and Care
It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist. To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dishwashing liquid, or
cKleeayniSngpewciipfeics aatsiothnesy can cause skin irritation.

Design for Comfortable Wearing
The inner sweat grooves of the band are specifically designed to minimize skin irritation resulting from sweat, moisture, and prolonged wear.

Product Name Display Resolution Battery Capacity Wireless Connection Water resistance garde Satellite positioning Geomagnetic sensor Air pressure senso Body Dimension

CW Watch R5G Pro 1.43″ HD AMOLED 466 x 466 370 mAh Bluetooth 5.3 3ATM Support GPS L1 + BDS Support compass Supports elevation 46.8mm × 46.8mm × 10.8mm

Precautions
· Do not replace the built-in battery yourself as it may pose a safety risk. · Avoid forcibly opening the watch case, as it may cause short circuits and overheating. · Keep the watch away from environments exceeding 60 to prevent battery leakage or explosion. · While the product complies with 3ATM waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow. Note that the waterproof performance may be
Help and Guide
Frequently Asked Questions If you encounter any problems while using the product, you can access the “Profile Help & Support” section in the Fitbeing app for assistance.
SPYocrouadncuatcnhtefMinQdanRthuceaolcdoemopnlettehperordiguhctt mtoanaucacless oinrFvitibseitinhgealpp.pfiatbt e”Pinrogf.icleom UfosreraGssuisidtae”n.ce.
Scan the QR code on the right to access it, or visit help.fitbeing.com to browse.

FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.product’s upgrade instructions.
ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.