Sami WEARABLE WS-2340 Running 3 Smart Band User Manual

Sami WEARABLE WS-2340 Running 3 Smart Band User Manual

WS-2340

Thank you for purchasing the Sami wearable WS-2340. Read the instructions carefully to obtain optimum results and preserve it for future reference. Sami has developed wearable devices since 2015 and we use the best components possible for the product.

DESCRIPTION OF THE WEARABLE

CONTENTS.

Wearable, USB charger, instruction manual.

CHARGING.

To charge the smart band, take out the device from the strap. Connect the SMART BAND RUNNING 2 to a computer or laptop with the USB cable for charging. Kindly use only the USB cable included with the wearable. If you use a power adapter for charging, the output of the power adapter should be 5V, 1A. Charging time: 2-3 hours. Please charge the device fully before using.

HOW TO POWER ON / POWER OFF?

1. To turn ON the smart band, on the screen, long press the touch button for a few seconds to make it Power On. The touch button is situated on the bottom of the screen.
2. To turn OFF the smart band, short press the touch button until the MORE icon of the menu appears in the screen then long press the touch button for a few seconds to enter, → tap the touch button again to find the Power OFF icon → on the interface the Power Off icon appears, long press the button till the Power Down appears → long press the touch button for 2 seconds to make it Power Off.

HOW TO CONTROL?

1. On the display screen, short press the touch button control to change between the different menus. Long press to achieve the different functions.

GETTING STARTED:

– For Android

1. How to obtain the BT Connection APK (WEARFIT)
   Please go to the PLAY Store and search Wear fit and install the app, or go to our website www.sami.es and download the application.

2. Installation the WEAR FIT APK.
   When installing the WEAR FIT application on your Android, you must allow all the Application Permissions, allow this WEAR FIT app auto run. The first time you run this WEAR FIT, it will ask you to Enable Notifications, please tap OK and tap the WEAR FIT and confirm OK.

3. How to make the wearable pair with your Android smart phone?

*First, turn on the Bluetooth of your Phone.

*Second, run the Wear fit app on your Phone, on the bottom of home page of WEAR FIT, tap Set tap Bind devices to experience more features wait few seconds and select the Bluetooth named “M4” or “WS-2340” to make it pair.The pairing will be finished in few seconds.

There will be a small connection icon appears on the left top side of the display screen after the pairing is finished successfully.

*Now you can start using your desired functions of the smart band. You may need to Log on the WEAR FIT APK/APP to experience complete functions.

– For iPhone

1. How to obtain the BT Connection APP? (WEARFIT)
   On iPhone, please go to APP Store and search WEARFIT and install the app.

2. How to make the wearable pair with your iPhone?

*Turn On the Bluetooth of the iPhone

• Run the FIT PRO app on the iPhone, on the home page of WEAR FIT, tap Setting tap Bind devices to experience more features wait few seconds and select the Bluetooth named “M4” or “WS-2340” to make it pair.The pairing will be finished in few seconds. There will be a small
  connection icon appears on the left top side of the display screen after the pairing is finished successfully.

*Now you can start using your desired functions of the smart band. You may need to Log on the WEARFIT APK/APP to experience complete functions.

PRODUCT FEATURES

• BLUETOOTH (V 4.0).
• FIXED-POINT TOUCH CONTROL(Tap to select & view functions, or tap to select to Power On/Power OFF.)
• TOUCH SCREEN. touch screen 0.96″
• BUILT IN VIBRATING MOTOR.
• BUILD IN HEART RATE SENSOR.
• BUILD IN GRAVITY SENSOR

DISPLAY SCREEN INTERFACE

1. Time/Date displaying (Synchronize time and date with your smart phone)
2. Clock Screens – three different home digital clocks; in the main screen, long press the touch button to change it.
3. State (pedometer) – Steps / Distance / Calorie
4. Heart rate monitor
5. Blood pressure test
6. Blood Oxygen (SPO2) test
7. Sports – including Outdoor/Indoor/Riding/Walk/Excise.
8. Sleep monitor
9. Other(functions) – including Do not disturb, Music control, Stopwatch, Find my phone
10. Setting – including Power Off /Reset /Native information
11. Remote camera – Support at APK/APP
12. Find the device– Support at APK/APP
13. Reminders – including Notifications of Phone Call / Message /Alarm clock / Sedentary reminder/APP notification /Non disturb mode – Support at APK/APP
14. Alarm clock – Support at APK/APP
15. APP notification – Support at APK/APP
16. Non-disturbing mode – Support at APK/APP

Data can be sync from the wearable to the smart phone on the WEARFIT APK/APP.
Your smart phone will synchronize when the Bluetooth is paired with this device.

FUNCTIONS.

• PHONE CALL NOTIFICATION – vibrating reminder for incoming phone calls. It may need you to turn it on at the Wearfit APK/APP.

• MESSAGE NOTIFICATION – vibrating reminder for incoming messages, including SMS, WhatsApp, Facebook, Twitter, Skype messages, etc.
  It may need you to turn it on at the Wearfit APK/APP.

• GPS MAP TRACE – (view it on the BT APP/APK Wearfit). You will need to Log on the Wearfit APP/APK before using the GPS Map Trace.
  On the bottom of the home page of the Wearfit app, tap Motion ➜ tap Start to view the GPS map. The GPS Map traces can be view and can be shared to Facebook.

• SLEEP MONITOR – supported in the Wearfit APK/APP

• SEDENTARY REMINDER (Long sit reminder) – supported in the Wearfit APK/APP

• ALARM CLOCK(Alarm Setting) – supported on the Wearfit APK/APP

• RAISE YOUR HAND TO LIGHT UP THE SCREEN (Lift wrist to bright up) – supported on the Wearfit APK/APP

• Remote CAMERA (remote take photos) – supported on the Wearfit APK/APP

**** THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE APPROXIMATE

TECHNICAL SPECIFICATIONS:

• Display screen: Capacitive touch screen IPS 0.96″.
• Internal memory: RAM 128KB, ROM 1024 KB
• Charge I/O port : Usb seat charging cable
• Battery: Built in Li-Polymer 90 mAh
• Stand by time: 5-10 DAYS
• Working time: 3-5 DAYS
• Bluetooth: V4.0.
• Exterior Dimensions: 255x18x12 mm
• Net Weight: 21.8 g
• Water-resist Rating: IP67 (this device resists raindrops, it’s not water proof)

Declaration of Conformity

Hereby we,

is in conformity with the relevant Union harmonization legislation:

DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU

Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.

with reference to the following standards applied:

Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 05 / 12 / 2019

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>