Creek Wearable S1 Smart Watch User Manual
- June 12, 2024
- Creek Wearable
Table of Contents
Creek Wearable S1 Smart Watch
Product Information
- Product Name: CW Watch S1
- Manufacturer: Fitbeing
Your CW Watch S1
Features:
- Digital Crown
- Touchscreen
- Front Screen
- Back Screen
- Magnetic Charging Contacts
- Heart Rate and Blood Oxygen Sensors
- Magnetic Charging Cable
- GPS
- Notification Center
- Control Center
- Tiles (Activity, Heart Rate, Sleep, Recently, Weather, Workout)
- Workout Recording
Steps for Use
You can follow these steps to use CW Watch S1:
The following steps will take approximately 5 to 10 minutes, please schedule a suitable time.
Wear Your Watch:
For optimal data accuracy, please observe the following guidelines while wearing the watch:
- Wear the watch at a position approximately two finger-widths from your wrist bone.
- For comfort, adjust the band to allow a finger’s width between it and your wrist. This ensures both contact and fit.
Power On:
Press the Digital Crown until the startup screen appears.
Note: If the watch can’t power on, it may be because the battery has drained due to long periods of inactivity. Please charge it for approximately 10 minutes and wait for it to power on automatically.
Set up the Watch:
-
Step 1: Download the Fitbeing app
Go to the app store on your phone, search for Fitbeing, and install it.- For Android phones, go to the Google Play.
- For iPhone, go to the App Store
- You can also scan the QR code on the left to quickly go to the Fitbeing app in the app store, and install it
-
Step 2: Pair with the App
Open the Fitbeing app and select “Set Up a Device” on the home page. Follow the instructions to pair your CW Watch S1 via Bluetooth. Then you can start using the watch.
Attention:
-
1. To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone’s system settings. - To ensure successful pairing, please grant Fitbeing App permissions to access Bluetooth, Location, and Camera on your phone.
Get Started
The watch supports full-screen touch and digital crown operation. Here are some basic operations:
Touchscreen Operation: Support full-screen touch (Swipe, tap, touch and hold)
- ↑Swipe up
- ←Swipe left
- →Swipe right
- ↓Swipe down
Digital Crown Operation: Press, long press for 8 seconds, and rotate
Press
- Press the digital crown to wake up the screen.
- Press the digital crown to enter the app center from the watch face screen.
- Exit the app
Long press for 8 seconds to force restarting the watch.
Rotate
- Toggle between screens or navigate through menus.
- Adjust the volume of prompt tones and phone calls
Common Functions
-
Notification Center: Swipe down on the watch face screen.
-
Change the Watch Face: Press and hold the screen for 1 second to access the watch face gallery.
-
Control Center: Swipe up on the watch face screen to access the Control Center. Enable features like Silent Mode, Sleep Mode, Always-on Display, and adjust brightness and volume swiftly.
-
Tiles: Swipe left or right on the watch face screen to switch quickly between Activity, Heart Rate, Sleep, Recently, Weather, or Workout tiles.
-
Record Workouts: Access the Workout app and select a specific workout to start recording.
For outdoor workouts, wait in an open area until the GPS connects. The blinking icon “ ” shows it’s acquiring a location fix and will stop blinking upon success. -
Health Metrics Measurement: When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can also view and track this data in the application.
Install New Watch Faces
In the Fitbeing app, navigate to the Face Gallery page to pick up your preferred watch face.
Charge the Watch
To charge the watch, connect the charging cable to a USB power source. Attach the other end to the charging contact on the back of the watch. The watch will display a charging icon while it is being charged.
Note:
- Make sure the USB charging plug is at the same side as the crown.
- Ensure to use a standard USB power source with an output of 5V⎓1A or above.
- Prior to charging, ensure to clean the charging contacts of the watch to eliminate any lingering sweat or moisture.
Change the Band
Remove band
- Lift the spring bar from the groove.
- Push and hold the spring bar.
- Pull it out gently to remove the band.
Install band
- Insert the metal pin at position “A” in the hole.
- Push and hold the spring bar.
- Press the band into the body and release the spring bar.
- Pull the watch band to confirm the firm installation
Wear and Care
- It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist.
- To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dishwashing liquid, or cleaning wipes as they can cause skin irritation. Instead, use mild soap and fresh water to clean the band.
Design for Comfortable Wearing
The inner sweat grooves of the band are specifically designed to minimize skin irritation resulting from sweat, moisture, and prolonged wear.
Key Specifications
Precautions
- Do not replace the built-in battery yourself as it may pose a safety risk.
- Avoid forcibly opening the watch case, as it may cause short circuits and overheating.
- Keep the watch away from environments exceeding 60℃ to prevent battery leakage or explosion.
- While the product complies with IP68 waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow.
- Note that the waterproof performance may be compromised if the product structure is damaged.
- Be aware that firmware upgrades can lead to interface and usage changes. For detailed information, please refer to the product’s upgrade instructions.
Help and Guide
Frequently Asked Questions
If you encounter any problems while using the product, you can access the “Profile → Help & Support” section in the Fitbeing app for assistance.
Scan the QR code on the right to access or visit help.fitbeing.net for assistance.
Product Manual
You can find the complete product manual in Fitbeing app at “Profile → User Guide”.
Scan the QR code on the right to access it, or visit help.fitbeing.net to browse.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses, and can radiateradio frequency energy, and if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licenceexempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>