PARKSIDE PBCM B1 Programmable Watering Timer Instruction Manual
- August 27, 2024
- PARKSIDE
Table of Contents
PARKSIDE PBCM B1 Programmable Watering Timer
Specifications
- Model Number: HG09708
- Max Operating Pressure: 4 bar
- Power supply: 2 x 1.5V AA batteries
- Flow Rate (at approx. 4 bar water pressure): about 50 l/min
- Programmable Max Time: 09:59 h
- Manual Max Time: 09:59 h
- Water Connection: (Specify if any)
- Protection Class: (Specify if any)
Introduction
Introduce the product and its main purpose briefly.
Safety Instructions
Provide essential safety precautions and guidelines for using the product safely.
Battery installation/replacement
Step-by-step instructions on how to insert or change the batteries in the device.
Initial Setup
Guidance on setting up the product initially for use.
Operation
Instructions on how to operate the product effectively.
Product Startup
Detailed steps to start using the product, including setting language, day of
the week, and current time.
Troubleshooting
Common issues that may arise and how to troubleshoot them effectively.
Cleaning and Maintenance
Proper cleaning and maintenance procedures to ensure product longevity.
Filter Cleaning
Instructions on how to clean the filter of the product.
Storage
Guidelines on how to store the product properly when not in use.
Disposal
Proper disposal methods for the product at the end of its lifecycle.
Warranty
Information regarding product warranty and how to claim it if needed.
Service
Details about where to seek service or support for the product.
FAQs
Q: What is the maximum operating pressure for the watering timer?
A: The maximum operating pressure is 4 bar.
Q: What type of batteries does the product use?
A: The product uses 2 x 1.5V AA batteries.
Q: How can I adjust the program duration on the watering timer?
A: You can adjust the program duration using the display interface following
the user manual instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>