LUXPRO LP130 Keychain Focusing LED Light User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUXPRO LP130 Keychain Focusing LED Light User Manual
Features
- Constructed with aircraft-grade aluminum
- Push/pull focus beam
- Enhanced rubber grip
- High quality matching carabiner clip
- Tactical on/off button
- IPX4 waterproof rating
- Batteries included (4 LR44)
ANSI/PLATO FL1 STANDARD
Operation Instructions
On/Off: Press and release the button on the tail cap to turn the light on
and off.
Focus Head: To focus the light beam, gently push the head away from the
light to extend it. Pull the head back towards the light to widen the beam.
Battery Replacement
The LP130 uses 4 LR44 batteries.
To replace the batteries, turn the tail cap counterclockwise to remove it. Tip
the light downward to slide out the plastic casing which contains the
batteries. Once the battery case is free, the old batteries can be pushed out
and new batteries can be inserted. For best results, we recommend using brand
new alkaline batteries that are the same voltage and brand. The use of the
plastic casing is not required for the batteries to work but does allow for
easier insertion of the batteries back into the light. Place the batteries in
the light with the (+) side facing up. Re-attach the tail cap by pressing down
lightly and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.
Product Warranty
The LP130 has a Limited 30-Day Warranty Against Manufacturer’s Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or sending an email to info@simpleproducts.com
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>