AlphaRex LUXX Series LED Tail Lights Installation Guide
- August 21, 2024
- ALPHAREX
Table of Contents
AlphaRex LUXX Series LED Tail Lights
Specifications
- Product: LUXX-Series LED Tail lights
- Compatibility: 2009-18 Ram Truck 1500 | 2010-18 Ram 2500/3500
- Manufacturer: ALPHAREX
FAQs
- Can I use dielectric grease during installation?
- No, it is advised not to use dielectric grease during installation.
- What tools are required for installation?
- T25 Star Torx screwdriver, Torx Screwdriver, Power Tool, 1/4 Ratchet, 1/4 Extension, Socket.
- Is professional help recommended for installation?
- If you do not fully understand the installation procedure, it is highly recommended to seek help from professional mechanics.
INSTALLATION TOOLS
PREPARE THESE TOOLS FOR INSTALLATION
NOTE: Whenever using a power tool, please make sure not to overtighten the screws. Whenever working on your vehicle, always make sure your vehicle is OFF and parked.
INSTALLATION STEPS
METHOD 1
- STEP 1. UNSCREW TAIL LIGHTS SCREWS
- Utilize a T25 Bit screwdriver or a power wrench to remove the top and bottom screws. Set them aside for later re-installation.
- After removing the screws, carefully pull the tail light outward at a slight angle.
- STEP 2. UNPLUG THE SOCKETS AND REMOVE THE LIGHT BULBS
- Disconnect the light bulb sockets and remove the tail light assembly.
- Subsequently, take out the light bulbs from the sockets. Repeat the same steps for the other side of the tail light.
METHOD 2: INSTALL ALPHAREX TAIL LIGHTS
- STEP 1. PLUG THE LIGHT SOCKETS
- Connect the light sockets directly to the new ALPHAREX tail lights. DO NOT USE DIELECTRIC GREASE!
- STEP 2. INSTALL ALPHAREX TAIL LIGHTS
- Reverse the removal process to install the new tail lights into the vehicle. Securely tighten the 2 X T25 bit screws for each side of the tail light.
-
- NOTE: When using a power wrench, exercise caution not to overtighten the screws.
- STEP 3. COMPLETE INSTALLATION
- Congratulations! You have completed the installation for ALPHAREX 09-18 Ram Truck 1500 | 10-18 Ram 2500/3500 LED TAIL LIGHTS.
ALPHAREX specializes in designing and producing superior and uniquely stylish aftermarket automotive performance lighting with unrivaled innovative technology. This installation guide takes you through the step-by-step process of installing your new ALPHAREX TAIL LIGHTS for your 2009-18 Ram Truck 1500 | 10-18 Ram 2500/3500 DO NOT USE DIELECTRIC GREASE!
Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse, or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>