MOTOROLA AVIGILON ALTA Modular Camera Hub Installation Guide
- August 21, 2024
- Motorola
Table of Contents
MOTOROLA AVIGILON ALTA Modular Camera Hub
Product Specifications
- Model: SERTECOOFM4
- Input: 8V (4mAHmXO)
- Ports: 4 PoE I/O, 4 a, 4 b, 5, 6
Product Usage Instructions
Installation
- Identify the appropriate input voltage (8V) and connect the power source.
- Connect devices to the designated ports – PoE I/O, a, b, 5, and 6.
Operation
- Ensure all connected devices are compatible with the specified voltage and ports.
- Power on the SERTECOOFM4 by using the power switch.
- Monitor the status indicators to ensure proper functioning.
Connections
Installation Instructions
FAQ
Frequently Asked Questions
- Q: How do I reset the device to factory settings?
- A: To reset the device, locate the reset button usually found on the back panel. Press and hold the button for 10 seconds until the indicators flash.
- Q: What should I do if the device overheats?
- A: If the device overheats, immediately power it off and disconnect it from the power source. Allow it to cool down before attempting to use it again. Check for any obstructions to ventilation.
©2024 Avigilon Corporation. All rights reserved. AVIGILON and the AVIGILON logo are trademarks of Avigilon Corporation. MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. Unless stated explicitly and in writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other intellectual property rights of Avigilon Corporation or its licensors. Covered by one or more claims of the patents listed at patent list.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>