Expert4house ZXHZD-01 Light Sensor User Manual

Expert4house ZXHZD-01 Light Sensor

FAQs

• Q: How can I improve the accuracy of brightness detection?
  • A: Keep the sensing surface clean where the brightness probe is located to ensure accurate detection values.
• Q: What should I consider for optimal performance?
  • A: Avoid obstacles with constant changes in brightness above the sensing surface for accurate readings.

PRODUCT SPECIFICATION

0～100lux: accuracy 5Lux
100～1000lux: accuracy 50Lux
Note: 10% fluctuation deviation based on the environment
LED indicator| YES
installation| 3M adhesive tape or screw
battery| 1.5V AAA dry battery*2
working temperature| -10℃～50℃
working humidity| ≤95% (no condensation)
update frequency| half an hour

PACKING LIST

• light sensor X 1
• user manual X1
• 1.5V AAA dry battery X2 (optional)

PRODUCT DESCRIPTION

• Used with the gateway, automatically detects the brightness of the surrounding environment, and works with another smart device for automation.

PREPARATION FOE USE

1. The mobile phone is connected to 24GHz Wi-Fi
   • Ensure that the smartphone is within the same Wi-Fi network as the Smart Gateway to ensure an effective connection between the smartphone and the Smart Gateway.
   • Preparation For Use
2. Download and open the App
   • In the App Store, search for the relevant App or scan the
   • QR code on the package/manual to download.
   • If you are downloading the App for the first time, please tap “Register” to register your account. If you already have an account, please click the “Login” button.

Network Settings

• Zigbee version: open the mobile App, click “Add subdevice” on the Zigbee gateway screen; press the reset button until the indicator blinks, then click “LED already blink” to add the device; after adding the device is successful, it can find device on the “Home” screen.
• Bluetooth version: open the Bluetooth switch on mobile; open the mobile App, click “search new device” on the Bluetooth gateway screen; press the reset button until the indicator blinks, then click “Light is in a flash” to add device; after adding device is successful, it can find the device on the “Home” screen. note. if the time is more than 2 minutes, will exit from matching.
• reset: press the reset button until the indicator blinks.
• update device status: press the reset button one time, the indicator blinks one time.

Notes

1. Keep the sensing surface where the brightness probe is as clean as possible, otherwise the accuracy of the detection value will be affected.
2. It is better to have no obstacles with constant changes in brightness above the sensing surface where the brightness probe is located. brightness above the sensing surface where the brightness probe is located.

Installation

1. choose a suitable place for installation.
2. fix via 3M adhesive tape or screw.
3. Install and change the battery: Press the bottom cover and push it up in the opposite direction of the reset button to open the bottom cover.

Electronic Information Products Toxic And Hazardous Substances Declaration

• 0: Indicates that the content of this toxic and hazardous substance in all homogeneous materials of this part is below the maximum limit specified in SJ/T1163-2006 Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products;
• X: Indicates that the toxic or hazardous substance contained in at least one of the homogeneous materials of the part exceeds the maximum limit specified in the SJ/T1163-2006 standard.
• The figures on this label indicate that the product has an environmental protection use period of 10 years under conditions of normal use, and some parts may also have an environmentally friendly use period mark. The environmental protection use period is based on the number indicated by the mark.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>