Expert4house Wi-Fi Garage Door Module App User Guide
- June 1, 2024
- EXPERT4HOUSE
Table of Contents
Expert4house Wi-Fi Garage Door Module App
MANUAL OVERRIDE
The switch module terminal reserves the access of manual override function for
the end-user to switch on/off.
- Switch on/off for permanent on/off function.
- Notes:
- Both the adjustment on App and switch can overwrite each other, the last adjustment remains in memory.
- The App control is synchronized with the manual switch.
Dimensions:
Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Turn on the power supply and follow switch module configuration instructions.
Notes : Take your smartphone close to the switch module when you’re configuring, and make sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
- Product type WIFI Garage Door Module
- Voltage AC100-240V 50/60Hz
- Operation frequency 2.412GHz-2.484GHz
- Operation temp. -10℃ + 40℃
- Protocol WIFI IEEE 802.11b/g/n
- Operation range <100m
- Dims (WxDxH) 39.2×39.2×18 mm
- IP rating IP20
- Warranty 2years
- Certificates CE-ROHS
with mounting clip
Global international operation Whenever & Wherever You are,All-in-one Mobile App.
INSTALLATION
Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp or hot environment.
- Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted to abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
FAQ
Q1: What should I do if I can’t configure the switch module?
- a. Please check whether device is powered on.
- b. Make sure your mobile and switch module are under the same 2.4 Ghz WIFI network.
- c. Whether it’s in good internet conditions.
- d. Make sure the password entered in App is correct.
- e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch module?
Only the garage door works
Q3: What happens if the WIFI goes off?
You can still control the device connected the switch module with your
traditional switch and once WIFI is active again the device connected to
module will connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or change the password?
You have to re-connect our Wi-Fi switch module to the new Wi-Fi network
accordingly as per the App User Manual.
Q5: How do I reset the device?
press the reset key for about 10 seconds until the indicator light flash.
APP USER MANUAL
-
IOS APP / Android APP
Scan the QR code to download Tuya Smart App, or you can also search keyword “Tuya Smart” at App Store or Googleplay to download App. -
Log in or register your account with your mobile number or e-mail address. Type the verification code sent to your mobile or mail box, then set your login password. Click “Create Family” to enter into the APP.
-
After the wiring of switch module is done, press the reset key for about 10 seconds until the indicator light inside the module is flashing quickly for pairing.
-
- Support multi-protocol matching : WIFI/Bluetooth.
-
Turn on Bluetooth,Click “+” , follow the on-screen instruction for paring.
-
The connecting will take about 10-120 seconds to complete depending on your network condition.
-
Finally, you can control the device via your mobile phone.
-
Connect to amazon alexa or Google Assistant for voice control, or share the devices with your families or friends.
-
Enjoy your smart life of home automation for lighting control by using our All-in-one mobile app wherever you are in the world or simply by voice control when you are sitting at home comfortably.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>