GTRRACING GTW500 Light Strip and Bluetooth Speakers User Manual
- August 12, 2024
- GTRRACING
Table of Contents
GTRRACING GTW500 Light Strip and Bluetooth Speakers
Product Information
Specifications
- Power Input: USB 5V / 2A
- Model: GTW-500-BLK
- Wireless control distance: 10m (Without occlusion)
Product Usage Instructions
- Connect the main board to the power cable and plug it into a USB 5V / 2A power source.
- Pair your phone with Bluetooth speakers for audio playback.
- Scan the QR code to download the app for more advanced control options.
- Choose from 12 static colors or enjoy dynamic lighting effects.
FAQ
- Q: How do I change the color of the LED lights?
- A: You can change the LED color using the IR remote or the mobile app by selecting from the available color options.
- Q: Can I control the brightness of the lights?
- A: Yes, you can adjust the brightness using the brightness control buttons on the remote or within the mobile app.
- Q: What is the wireless control distance of the device?
- A: The wireless control distance is 10 meters without any obstructions.
Thank you for choosing us. Before using your new product, please read these instructions to prevent any damage.
SAFETY WARNINGS AND GUIDELINES
When using electrical products, basic precautions should always be followed.
WARNING: These products may represent a possible shock or fire hazard if
improperly installed or attached in any way.
Products should be installed according to this install guide and current
electrical codes.
WARNING
- Risk of electric shock
- Do not use products where directly exposed to water.
- This product is not a toy.
- Only use the power supply applied; using a different one can damage the product.
- For safety reasons, do not break down this product, and use it only in the manner intended by the manufacturer.
DO NOT roll up when using. Please spread out the LED Strip Light before connecting it to the power supply.
PRODUCT INSTRUCTIONS
- Clean the installation surface. Make sure the surface is smooth, dry, and clean.
- Tear off the plastic on the adhesive tape and stick the strip on the desk board anywhere you like.
- Stick to the installation surface.
- Plug into the socket. Use the IR Remote to turn on and operate the lights.
IR Remote
- Turn on
- Auto mode
- Turn off
- Flashing Speed +
- Flashing Speed –
- Dynamic Mode UP
- Dynamic Mode DOWN
- Birghtness +
- Brightness –
LED Color Buttons（12 Colors）
- Static Red / Static Green / Static Blue / Static Pink / Static Yellow / Static Orange / Static Light Orange / Static Light Blue / Static Dark Blue / Static Purple / Static Onion green / Static Grass Green
Dynamic Mode
- Dynamic lighting will perfectly customize different styles of scene effects for you.
Manufacturer: Shenzhen Meiming Optoelectronics Co., Ltd. address:3rd Floor, No. 31, Guangming Road, Shiyan Street, Baoan District, Shenzhen
- Power Input: USB 5V / 2A
- Model: GTW-500-BLK
- Wireless control distance: 10M(Without occlusion)
Searching for devices
- Scan the APP QR Code via your phone to download the APP to achieve phone operation.
- Our APP → Add Devices
- Searching for devices…→ Select → Connect
- Turn on the power. Now adjust the light unit to your preferences.
- Lighting Scene And Speed Control.
- Lighting Color And Brightness Control.
- Lighting Dynamic Mode Control.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in porlable exposure conditions without restriction.