expert4house H1 WiFi Smart Siren User Manual
- June 5, 2024
- EXPERT4HOUSE
Table of Contents
- expert4house H1 WiFi Smart Siren
- Features
- Download the app and register
- How to connect WiFi network.#1: Default mode”
- How to connect WIFI network, #2: compatibility mode”
- WiFi connection notes
- Add detectors and remotes
- Edit the accessory name
- Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
expert4house H1 WiFi Smart Siren
Features
- Based on the TUYA smart home platform, work with most of the TUYA smart-based smart products.
- On-site high-decibel alarm, flashing lights, and other alarm modes.
- Home Arm, Away Arm, Disarm
- Low-battery detection
- System power off detection.
- Tamper detection.
- Built-in battery.
Download the app and register
Search for ” TuyaSmart” or scan the QR code below to download the app and register.
How to connect WiFi network.#1: Default mode”
- Open the APP homepage, press “+” in the upper right corner to add devices select “ALL devices” select “Alarm system”
-
Re-open the smart siren switch, reconnect the power, and press and hold the RESET button for 5 seconds, the indicator flashes quickly, ready to connect WiFi.
-
Confirm indicator quickly blink”Enter WiFI password (2.4G WiFi only) OK
How to connect WIFI network, #2: compatibility mode”
If the default way to connect WIFI is unsuccessful, you can select “AP Mode”.
-
Open the APP homepage, press ” + ” in the upper right corner to add devices select “ALL devices” select “Alarm system”
-
Click on ” AP Mode ” at the top right of the app.
-
Re-open the smart siren switch, re-connect the power, press and hold the RESET button for 5 seconds, the indicator light flashes quickly, continue to press and hold the RESET button for 5 seconds, the indicator light flashes slowly, ready to connect.
-
Confirm indicator slowly blink” Enter the network password (2.4G WiFi only) OK Go connect.
-
Find ” SmartLife-xxx ” in the wifi list of your mobile and click Connect Return to the ” TuyaSmart ” APP.
WiFi connection notes
- Does not support a 5G router.
- If the above two-way connection fails, please try to restart the router.
- Siren host and mobile phone as close as possible to the router.
Add detectors and remotes
-
Click on the APP homepage ” accessories ” select ” The detector “or ” The control ” and click on ” add”
-
Click ” OK”> smart siren light keep on accessories send signals smart siren light flashes 3 times, adding is successful.
Edit the accessory name
In order to make it easier to distinguish different alarm events, edit the accessory name (within 24 characters).
Specifications
- Arm: alarm with sound and light flash
- Home Arm: only light flash to alarm
- Disarm: only SOS alarm available
- Remote controls: max 8
- Detectors: max 24
- Volume: high/ medium / low
- Beep time: 1-180 seconds adjustable
- Timing control: arm/ home arm / disarm
- Accessories frequency: 433Mhz (can be customized to any frequency between 300-912M)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>