SJE RHOMBUS 1038028D Control Panel Installation Guide

SJE RHOMBUS 1038028D Control Panel

Specifications

• Max. enclosure size for panel mounting post: 14 x 12 x 6 inches

Product Usage Instructions

Control Panel Accessories Installation

1. Locate the post next to the riser and determine the location of the access hole.
2. Use the recommended hole locations shown on the template provided on the back of the page for the top of the post.

Riser Mounting Kit Installation

1. Using a hole saw, create a 2 3/8 inch (6.03 cm) hole in the riser and post for conduit entry.
2. Before mounting the post to the riser, pre-assemble parts and cut the conduit to 1 inch (2.54 cm) past the PVC washer.
3. Install the post to the riser by assembling parts as shown and solvent weld male adapters to both ends of the conduit.

Mount Enclosure to Post

1. Mount the enclosure to the post by assembling parts as shown.
2. Follow the recommended hole locations provided on the template for proper installation.

Simplex/Duplex Kit Installation

1. If all positions in cord seal are not used, plug open positions with PVC plugs provided.
2. Tighten the nut on the cord seal to prevent gas and moisture from entering the panel.

FAQ

• Q: What is the warranty for this product?
  A: This product comes with a Five-Year Limited Warranty. For complete terms and conditions, please visit www.sjerhombus.com.

• Q: Are there any special requirements for returning products?
  A: Products returned must be cleaned, sanitized, or decontaminated as necessary prior to shipment to ensure that employees will not be exposed to health hazards in handling said material. All applicable laws and regulations shall apply.

Control Panel Accessories Installation Instructions

Riser Mounting Kit Installation Instructions

Figure 1
Locate the post next to the riser and determine location of access hole. Recommended hole locations for top of post are shown on a template on the back of this page.
Figure 2
Before mounting post to riser, pre-assemble parts and cut conduit to 1 inch (2.54 cm) past PVC washer.
Figure 3
Install post to riser by assembling parts as shown. Solvent weld male adapters to both ends of conduit.
Figure 4
Final assembly should be as shown.

Simplex/Duplex Kit Installation Instructions

Figure 1
Mount enclosure to post by assembling parts as shown.
Recommended hole locations are shown on a template on the back of this page.

Figure 2
Final assembly is as shown. If all positions in cord seal are not used, plug open positions with PVC plugs provided. Tighten the nut on the cord seal to prevent gas and moisture from entering panel.

SJE RHOMBUS® FIVE-YEAR LIMITED WARRANTY

Five-Year Limited Warranty. For complete terms and conditions, please visit www.sjerhombus.com.

NOTICE!
Products returned must be cleaned, sanitized, or decontaminated as necessary prior to shipment to ensure that employees will not be exposed to health hazards in handling said material. All applicable laws and regulations shall apply.

PANEL MOUNTING POST TEMPLATE

Technical Support: +1 800-746-6287 • techsupport@sjerhombus.com • www.sjerhombus.com Technical Support Hours: Monday – Friday, 7 A.M. to 6 P.M. Central Time

PN 1038028D 05/21
© 2021 SJE, Inc. All Rights Reserved. SJE RHOMBUS is a trademark of SJE, Inc.

References

• Home - SJE Rhombus Control Products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>