DONNER Dobuds Open DTW-E11 True Wireless Stereo Earbuds Instruction Manual
- August 21, 2024
- Donner
Table of Contents
DONNER Dobuds Open DTW-E11 True Wireless Stereo Earbuds
IN THE BOX
PRODUCT OVERVIEW
WEARING
CHARGING
Fully charge the battery before using the earbuds for the first time or when they have been unused for extended periods.
BLUETOOTH PAIRING
CONTROLS
Note: Earbud will automatically power off if it fails to connect with any mobile phone or other compatible devices within 3 minutes after the TWS connection is on.
RESET
Try the following steps if the earbuds cannot properly pair with each other or with other devices.
- Place the earbuds in the charging case and leave the case open.
- Press and hold the reset button on the case for 3s until both indicators blink in white and blue. Reset is completed.
SPECIFICATIONS
| Model | DTW-E11 |
|---|---|
| Bluetooth Version | Bluetooth 5.3 |
| Bluetooth Frequency | 2.402GHz~2.480GHz |
| Bluetooth Transmitted Power | < 8dBm |
| Paired Name | Donner Dobuds Open |
| Operation Mode | Touch control |
| Charging Port | Type-C |
| Operating Range | ≥10m(No obstacles between) |
Talk/Play Time
| Earbud| About 8H
About 6.5H
With charging case| About 32H
About 26H
Charging Time| ≤1.5H
Battery Capacity| 50mAH(Earbuds)
400mAH(Charging case)
CAUTIONS
Hearing Comfort
To prevent damage to your hearing, please do not raise the volume too high.
Listening to loud sounds for an extended period may cause temporary or
permanent hearing loss.
Traffic Safety
Do not use headphones while walking, driving, or cycling, which may cause
traffic accidents.
Placement
Do not store it in the following environments: Direct sunlight, high
temperature, excessive humidity, excessive dust, and strong vibration.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in porlable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>