HIGHONE 973807 42x24cm Table Barbecue Instruction Manual

: August 20, 2024
: HIGHONE

Table of Contents

Product Information
Product Description
Technical specifications
Product usage
Cleaning
Troubleshooting
WARRANTY CONDITIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HIGHONE 973807 42x24cm Table Barbecue

Product Information

Specifications

Operating Voltage : 220-240V
Frequency : 50/60Hz
Power : 2000W

Product Description
The HIGHONE Barbecue is a top-quality product recommended by ELECTRO DEPOT. It features a grill, heating element, thermostat, indicator light, drip tray, and plastic stand.

Product Usage

Preliminary Operations
Before first use, fill the tray with water and heat the unit for 15 minutes to remove the protective film around the heating element. Set the thermostat to the MAX position. Preheat the unit for approximately 5 minutes before using it.

Operation
Ensure the tray is filled with water and the reflective metal foil is in place during cooking to prevent excessive heat radiationon the grill’s surface. Some smoke may be generated initially; ensure there is sufficient ventilation.

Cleaning and Maintenance

Cleaning: Regularly clean the unit after use. Ensure the heating element is correctly inserted in the tray.
Troubleshooting: If the heating element does not turn on, check the mains connection and the correct positioning of the heating element in the tray.
Storage: Store the unit appropriately if not going to use it for a long period of time.

Thank you!
Thank you for choosing this HIGHONE product . HIGHONE products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down.
We’re conf ident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.

Product Description

Grill
Heating element
Thermostat
Indicator light
Drip tray
Plastic stand

Technical specifications

Operating voltage : 220-240 V
Frequency : 50/60 Hz
Power : 2000 W
Protection class : I

Product usage

Preliminary operations
Please refer to Figure 1.

Start by removing the heating element (2).
Remove all the packaging material.
Clean the grill (1) and tray (5) with a damp cloth.
Turn the tray over (5).
Assemble the grill as shown in Figure 1.
Pour 1.5 litres of cold water into the tray, until the “MAX” mark is reached.

NOTE

Don’t stop pouring water until the reflective metal foil is covered. The bain-marie and metal foil prevent excessive heat radiation on the grill’s surface.
As a result, you should always cook food with the tray filled with water and the reflective metal foil in place.
Before first use, fill the tray with water and heat the unit for 15 minutes to remove the protective film around the heating element. Set the thermostat to the MAX position. It is normal for some smoke to be generated. Make sure there is sufficient ventilation.
Preheat the unit for approx. 5 minutes before using it.

Operation

Insert the plug into a socket with a properly installed 230 V/50 Hz shield contact.
Pour 1.5 litres of cold water into the tray, up to the “MAX” mark. MAX : 1.5 L OF COLD WATER
Adjust the thermostat according to the desired use: a low or medium temperature to cool or reheat food, and MAX to grill and quickly cook food. The LED indicator will turn off once the required temperature has been reached.
Place the food directly on the grill. Never use plates, baking trays or aluminum foil under the food. The cooking time depends on the thickness of the food and the set temperature. Thick pieces will cook faster if you pierce holes in them with a metal skewer. Occasionally turn the food.
The grill’s height can be adjusted.
Please refer to Figure 2.
If the water level drops below the “MIN” mark after continuous use, unplug the plug from the socket and refill the tray up to the “MAX” mark. Do not pour cold water onto theheating element when it is hot, as this could cause damage. To turn off the unit: set the thermostat to “0” and unplug the unit.

Cleaning

Always unplug the plug from the socket before carrying out any cleaning operations and wait for the unit to cool down.
Clean the unit with a soft, slightly damp cloth. Never immerse the heating element in water!
The grill, reflective metal foil and tray can be washed with soapy water.
Never use a steel brush or other objects that could scratch the unit.
Assemble all the parts as indicated in the diagram. This unit has been tested in accordance with all applicable European directives, in particular the Low Voltage Directive and the Electromagnetic Compatibility Directive and has been manufactured according to the latest safety regulations. Subject to technical modifications without prior notice.

Troubleshooting

The heating element is fitted with a safety switch, which prevents the heating unit from operating outside the tray. If the heating element does not turn on, check the mains connection and whether the heating element has been correctly inserted in the tray.

Storage

Always check the unit is unplugged and has cooled completely before putting it away.
Store the unit in a clean, cool and dry place. Avoid exposure to direct sunlight.
Store the unit out of the reach of babies, children and pets.
Keep the original packaging to store the unit when you are not going to use it for a long period of time.

WARRANTY CONDITIONS

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase. This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear proof of purchase required.

ELECTRO DEPOT: 1 route de Vendeville 59155 FACHES-THUMESNIL – FRANCE

FAQ’s

Q: What should I do if the heating element does not turn on?
A: Check the mains connection and ensure the heating element is correctly inserted in the tray.

Q: How should I prepare the unit for first use?
A: Fill the tray with water, heat the unit for 15 minutes to remove the protective film around the heating element, and preheat for about 5 minutes before use

Q: Is it normal for some smoke to be generated during initial use?
A: Yes, it is normal. Ensure there is sufficient ventilation.