HIGHONE WF 510 D W566C Washing Machine Instructions

Washing machine
Lave-linge
981282 – WF 510 D W566C

WF 510 D W566C Washing Machine

Thank you!
Thank you for choosing this HIGHONE product.
HIGHONE products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down.
We’re confident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.

Product overview

Parts

Door
Detergent dispenser
Control panel
Drain hose
Power supply cord| Service flap
4 x Cover caps
1 x Supply hose cold water
Acoustic sponge (optional)
---|---

Note:

• The product picture is for illustration only, please refer to real product as reference.

Specifications

Dimension
A:| 595 mm
B:| 850 mm
C:| 435 mm
Weight:| 52 kg
Rated Power:| 2 000 W
Reference Dimension
D:| 440 mm
E:| 400 mm
F:| 900 mm
G:| 156 mm

Product usage

Installation
Tools Needed If Installation By Yourself (not include)

Installation area

Warning!

• Stability is important to prevent the product from wandering!
• Make sure the machine is standing leveled and stable.
• Make sure that the product does not stand onto the power cord.
• Make sure to maintain the minimum distances from the walls as shown in the picture.

Before installing the machine, the location characterized as follows shall be selected:

• Rigid, dry, and level surface.
• Avoid direct sunlight.
• Sufficient ventilation.
• Room temperature is above 5°C.
• Keep far away from the heat sources such as coal or gas burning appliances.

Unpacking the washing machine

Warning!

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suffocation ! Keep all packaging well away from children.
  1. Remove the cardboard box and styrofoam packing.
  2. Lift the machine and remove the base packaging.
  3. Remove the tape securing the power supply cord and drain hose.
  4. Remove the inlet hose from the drum.

Levelling the washing machine
Warning!

• The lock nuts on all four feet must be screwed tightly against the housing.

1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level using a spirit level.

Connect the water supply hose
Warning!
To prevent leakage or water damage, follow the instructions in this chapter.

• Do not kink, crush or modify water inlet hose.

Connect the water supply hose to the water inlet valve and a water tap with cold water as indicated.

There are two ways to place the end of drain hose:

1. Put it into the water trough.
2. Connect it to the branch drain pipe of the trough.

Acoustic Sponge
Note:

• Please make sure to assemble the acoustic sponges, which can effectively reduce the noise caused by the machine while working, in order to provide you with a more peaceful and quiet living environment.

1. Get the machine laid on the floor, using some soft material like foam or clothes between the machine and floor for a protection.
2. Stick the 2x longer sponges to the longer bottom edges of machine, and the 2x shorter sponges to the shorter bottom edges.

Operation

Quick Start
Caution!

• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory.
  To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, recommended to clean the inner drum by running the «Drum
  Clean» or other program with the optional temperature of 90  °C.
  Be careful not to put laundry and detergent in the machine.

Before Washing

1. Plug in
2. Open tap
3. Load
4. Close door
5. Add detergent

Washing

1. Select programme
2. Select function or remain default settings
3. Press Start/Pause to start the program

Note:

1. If default is selected, step 2 can be skipped.
2. The function button line chart is for reference only, please refer to real product as standard.
   • After Washing
   Buzzer beep.
   Before Each Washing
   • The ambient temperature of the machine should be 5°C-40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze before use.
   • Please check your laundry care labels and the detergent use instructions before wash.
   Use non-foaming or less-foaming detergent suitable for washing machine properly.

1. Take all items out of the pockets
2. Sort laundry according to color and textile type
3. Tie together long textile strips and belts, close zips and button
4. Put small items into a laundry bag

Warning!

• Do not wash articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances like wax, oil, paint, gasoline, alcohol, kerosene, and other flammable materials.

• Washing single clothes items may easily create big eccentricity.
  Therefore it is suggested to add one or two more laundry items to the wash so that spin can be done smoothly.

• Do not wash, spin, or dry water-proof seats, mats, or clothing.

Detergent Dispenser

Caution!

• Detergent only need to be added in “compartment I” after selecting pre-wash function.
• Do not put laundry beads into the detergent dispenser.

selected.
Programmes| Available according to the laundry type.

Cleaning and maintenance

Cleaning and maintenance
Warning!

• Always unplug the appliance and close the water tap before cleaning and maintenance.

Cleaning the Cabinet
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a towel to wipe it off immediately.
Never use sharp items to clean the appliance.

Caution!

Never use abrasive or caustic agents. formic acids or its diluted solvents or similar substances, like alcohol or chemical products.
Cleaning the Drum
Any rust stains left inside the drum by metal articles must be removed immediately using chlorine-free detergents. Never use steel wool for cleaning the drum!
Note:

• Keep any laundry away from the machine while cleaning the drum.

Cleaning the Door Seal and Glass
Wipe the glass and seal after each wash to remove lint and stains.
If lint builds up it can cause leakages.
Remove any coins, buttons and other objects from the seal after each wash.
Clean the door seal and glass every month to ensure the normal operation of the appliance.

Cleaning and maintenance

Caution!

• When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover,  ensure it is securely re-tightened.

Trouble shooting

Whenever there is a problem with the appliance, check if you can solve it following the tables below.

• Check the laundry.
Door can´t be
opened| • Safety protection is activated.| • Disconnect the power and restart.
Water leakage| • Connections are not tight enough.| • Check and fasten the water inlet pipe.
• Check and clean the outlet hose.
Detergent residues in the  detergent dispenser| • Detergent is damp and/or clotted.| • Clean and wipe the detergent dispenser dry.
Indicator or display
does not work| • PC board or harness have connection  problems.| • Switch off the power and check if the mains  plug is connected properly.
Abnormal noise| • Fixing bolts still in place.
• Floor is not solid or level.| • Check if the fixing bolts have been removed.
• Make sure the appliance is installed on a solid  and level floor.

Transport
IMPORTANT STEPS WHEN MOVING THE APPLIANCE

• Unplug the appliance and close the water inlet tap.
• Check if the door and the detergent dispenser are closed properly.
• Remove the water inlet pipe and the outlet hose from the house installations.
• Let the water drain completely from the appliance (see “Cleaning the Drain Pump Filter”)
• Important: Re-install the 4 transport bolts in the back of the appliance.
• This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door can not be used as a handle.

References

• Tienda de electrodomésticos y electrónica | ELECTRO DEPOT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>