HIGHONE TT 93 E Built In Refrigerator Instruction Manual
- June 1, 2024
- HIGHONE
Table of Contents
HIGHONE TT 93 E Built In Refrigerator
Product Information
Specifications
- Model: 983821 – TT 93 E W625C
- Dimensions: 472mm x 520mm x 520mm
- Recommended clearances: Keep at least 4 hours in summer when the ambient temperature is high. Keep away from appliances, heating ducts, and direct sunlight.
Product Usage Instructions
Proper Use of Refrigerators
Before using the refrigerator, ensure to remove the protective film on the doors and the refrigerator body.
Adjusting Procedures
- Turn the feet clockwise to raise the refrigerator.
- Turn the feet counterclockwise to lower the refrigerator.
- Adjust the right and left feet to achieve a horizontal level.
Door Right-Left Change
- Power off the refrigerator and remove all objects from the door trays.
- Fix the door with tape.
- Dismantle and assemble the door according to the provided instructions using the necessary tools.
Structure and Functions
Ensure not to store too much food during initial operation as it may affect the freezing effect. Do not block the air outlet with stored food to maintain proper freezing efficiency.
FAQ
- Q: Can I adjust the temperature settings on this refrigerator?
- A: Yes, you can adjust the temperature using the temperature control knob located inside the refrigerator.
- Q: How often should I clean the drain tray?
- A: It is recommended to clean the drain tray regularly, at least once a month, to prevent clogs and ensure proper drainage.
Thank you!
- Thank you for choosing this HIGHONE product.
- HIGHONE products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down.
- We’re confident your new device will be a pleasure to use every day!
- Welcome to ELECTRO DEPOT.
Product Overview
Parts
- A: Little door
- B: Drain tray
- C: Lamp
- D: Temperature control knob
- E: Shelf
- F: Fruit and vegetable box
- G: Fence
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.
Product usage
Proper use of refrigerators
Placement
-
Before use, remove all packing materials, including bottom cushions, foam pads and tapes inside of the refrigerator; tear off the protective film on the doors and the refrigerator body.
-
Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
-
Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.
-
The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust the wheel for levelling if unstable).
-
The top space of the refrigerator shall be greater than 30cm, and the refrigerator should be placed against a wall with a free distance more than10cm to facilitate heat dissipation.
Precautions before installation:
- Information in the Instruction Manual is only for reference. The physical product may differ. Before installation and adjusting of accessories, it shall be ensured that the refrigerator is disconnected from power.
- Precautions shall be taken to prevent fall of the handle from causing any personal injury.
Levelling feet
- Schematic diagram of the levelling feet
The picture aboveis only for reference. The actual configuration will depend on the physical product or statement by the distributor.
Adjusting procedures:
- Turn the feet clockwise to raise the refrigerator;
- Turn the feet counterclockwise to lower the refrigerator;
- Adjust the right and left feet based on the procedures above to a horizontal level.
Door right-left change
List of tools to be provided by the user
- Power off the refrigerator, and remove all objects from the door trays.
- Fix the door with tape.
- Dismantle the upper hinge cover, screws and upper hinge, and remove the plastic screw hole caps from the other side
- Dismantle the door and the bottom hinge assembly and adjustable foot, then assemble the bottom hinge assembly and adjustable foot on other side.
- Dismantle the stopper under the door, then assemble the stopper on the other side. Put the door on bottom hinge and assemble the upper hinge, upper hinge cover andplastic screw hole caps successively.
The picture aboveis only for reference. The actual configuration will depend on the physical product or statement by the distributor.
Changing the light (optional)
- This product contains a light source exempted of energy efficiency class.
- Light source in this product can be replaced by the end user.
- Please unplug the appliance before any light source change operation.
- The light source shall be removed at the end of the product’s useful life, with sorting and recycling done separately.
Replacement of incandescent lamps:
- Disconnecting the power supply before carrying out the bulb replacemen
- Hold and remove the light bulb cover.
- Dismantle the old bulb by unscrewing it counterclockwise.replace by a new bulb (Max. 10W) by screwing it clockwise, and make sure it is fixed in the bulb holder tightly.
- Reassemble the light cover and re-connect your fridge to the power supply.
Aboveis only for reference. The actual configuration will depend on the physical product or statement by the distributor.
Starting to use
-
Before initial start, keep the refrigerator still for half an hour before connecting it to power supply.
-
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in summer when the ambient temperature is high.
-
Spare enough space for convenient opening of the doors and drawers or statement by the distributor.
Energy saving tips
- The appliance should be located in the coolest area of the room, away from heat-producing appliances or heating ducts, and out of direct sunlight.
- Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
- The appliance storage bin should not be lined with aluminium foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.
- Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.
Structure and functions
Refrigerating chamber
- The refrigerating chamber is suitable for storage of a variety of fruits, vegetables, beverages and other food consumed in the short term. Suggested storage time 3 days to 5 days. It is the most energy efficient to place food in the position.
- Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
- Foods are recommended to be sealed up before putting into the refrigerator.
- The glass shelves can be adjusted up or down for a proper storage space and easy use.
- Drain tray is used for receiving water when defrosting.
- Please empty the water in the drain tray regularly in case the water overflowing into the cabinet.
Note: Storage of too much food during operation after the initial connection to power may adversely affect the freezing effect of the refrigerator. Foods stored shall not block the air outlet; or otherwise the freezing effect will slao be adversely affected.
Functions
- The picture aboveis only for reference. The actual configuration will depend on the physical product or statement by the distributor.
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.
- Turn the temperature control knob to MAX, the internal temperature of the refrigerator becomes lower.
- Turn the temperature control knob to MIN, the internal temperature of the refrigerator becomes higher.
- The letter on the knob only represents the level, but does not mean the specific temperature, the «OFF» means stop working.
- Recommended gear: “MED”
N O TE: Please adjusting and use between “MAX” and “MIN”.
-
Thermostat setting for ambient T°C : NORMAL +24°C (± 4°C)
-
Thermostat setting for ambient T°C : COLD +16°C (± 4°C)
-
Thermostat setting for ambient T°C : HOT +32°C (± 4°C)
Cleaning and maintenance
Maintenance of refrigerator
Cleaning
- Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving.
- Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent.
- The interior of the refrigerator should be cleaned regularly to avoid odour.
- Please turn off the power before cleaning the interior, and remove all foods, drinks, shelves drawers, etc.
- Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before turning on the power.
- For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combine them with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterial accumulation in these areas.
- Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odours in the interior of the refrigerator or contaminated food.
- Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted detergent. Dry with a soft cloth or dry naturally.
- Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and then wipe dry.
- Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpaste), organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may damage the cooler surface and interior. Boiling water and organic solvents such as benzene may deform or damage plastic parts.
- Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect electrical insulation after immersion.
WARNING!
Please unplug the refrigerator for defrost and cleaning.
Defrost
- Power off the refrigerator.
- Remove the food from the refrigerator and place it properly to prevent food from melting.
- Clear the drain pipe (to use soft materials to prevent damage to the liner), prepare the water containers for defrosting. (Pay attention to clean the compressor compartment water draining tray, avoding overflow to the ground).
- You can use the natural temperature for the natural defrost, you can also use the ice shovel to eliminate the frost (to use plastic or wooden ice shovel, for avoding damage to the liner or pipe).
- You can also use the appropriate amount of hot water to speed up the defrost, with a dry towel to dry the water after defrosting.
- After defrosting, put back the foods in cabinet , and power on the refrigerator.
Stop using
- Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for several hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into the appliance.
- Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odor.
- Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and seal them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during movement shall be no more than 45°.
The appliance shall run continuously once it is started. Generally, the operation of the appliance shall not be interrupted; or otherwise the service life may be impaired.
Troubleshooting
You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department.
Table 1 Climate classes
- Extended temperate: this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C;
- Temperate: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C;
- Subtropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 ° C to 38 °C;
- Tropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C;
CONTACT
- ELECTRO DEPOT
- 1 route de Vendeville
- 59155 FACHES-THUMESNIL – FRANCENOT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>