DONGGUAN TAC-138 Automatic Induction Fast Wireless Car Charger Instruction Manual

DONGGUAN TAC-138 Automatic Induction Fast Wireless Car Charger

Product Specifications:

• Input voltage: 5V/9V/12V
• Output power: 5W/7.5W/10W/15W (Max)
• Frequency: 115-205KHZ
• Efficiency: 10W/83%, 15W/82.6%
• Induction Distance: 4mm (Max)
• Compatible with: Fast Wireless Charging Mode
• FCC ID: 2BDOG-TAC-138
• LED Mode: Working state, Power transfer, Standby mode, Charging FOD Warning, Charge complete
• LED light color: Red, blue, red-blue light flash once, then off

Product Usage Instructions

Installation:

1. Insert the adjuster into the ball joint adapter.
2. Insert the ball into the socket at the back of the bracket, turn the adjuster to tighten.
3. Insert the hook into the car air outlet vane and tighten to lock. When you hear ‘clatter’ sounds, it means the mount has been fixed tightly.
4. Connect the charging cable to the charging interface. After power is on, the clamp arms will open automatically. The clamp arm can also be opened by pressing the button on both sides.

Charging Instructions:

1. To charge effectively, adjust the foot support to align the phone receiving coil with the charging center.
2. Place your device into the bracket. The clamping arms of the bracket will close automatically when it inducts the receiver coil of your device.

Compatible Devices:
The product works well with all Qi-enabled devices including iPhone 13 series, iPhone 12 series, Samsung Galaxy series, Huawei P30 Pro, Xiaomi, LG, Sony, Google devices, etc. It also supports Qi-disabled devices with a wireless receiver or wireless charging case (requires a receiver compliant with WPC Qi standard).

Frequently Asked Questions (FAQ):

• Q: What phones are compatible with this wireless charger?
  A: Compatible devices include iPhone 13 series, iPhone 12 series, Samsung Galaxy series, Huawei P30 Pro, Xiaomi, LG, Sony, Google devices, and more. Qi- disabled devices can also be used witha wireless receiver or charging case compliant with WPC Qi standard.

• Q: How do I know if the charger is working?
  A: The charging indicator turns red when the device is charging. Additionally, the LED light on the charger indicates differentstates – working state, power transfer, standby mode, charging FOD warning, and charge complete.

Please read the instructions carefully before using. Pictures are for reference only, Specifications are subject to the physical product

What is included

Features

• Car holder with wireless charging function, charges your phone conveniently when driving.
• Power output 5W/7.5W/10W/15W, compatiblewith all phones with QI standard.
• Full 360 degrees rotation for perfect viewing angle.
• Start charging once as the phone contact with the\ holder, no need plug cable in the phone.
• Adjustable foot support makes easy to align to the charging center.

Parameters

Air Vent Mount

Wireless Charging Holder

Product specification

Wireless Charging Holder

Input voltage

| 5V/9V/12V /

Over voltage protection

Input current| 2A / Over current protection
Output power| 5W / 7.5W / 10W / 15W (Max)
Frequency| 115-205KHZ
E ciency| 10W/83%  15W/82.6%
Induction Distance:| 4mm (Max)
Open / Close holder arms:|

Coil Induction or press button

Compatible with Fast Wireless

Charging Mode：

| Support QI / Apple Iphone 7.5W / HUAWEI / SAMSUNG

10W / LG / SONY / GOOGLE /

XIAOMI wireless charging

FCC ID| 2BDOG-TAC-138

LED Mode

ash once, then o

Standby mode| Light o
Charging| Red light keeps on
FOD Warning| Red light keeps ashing
Charge complete| Red light keeps on

Compatible devices

• Work well with all Qi enabled devices including:
  • iPhone 13, iPhone13 Pro Max, iPhone13 Pro,
  • iPhone13 mini, iPhone 12, iPhone12 Pro Max,
  • iPhone12 Pro, iPhone12 mini, Samsung Note 8,
  • Note 9, iPhone XS MAS, Huawei P30 Pro, MIUI9,
  • Samsung S10+, iPhone 8PLus, Samsung S9+,
  • Samsung S8+, iPhone XR, Samsung S10,
  • Samsung S7edge, Samsung S8, iPhone XS, iPhone X,
  • Samsung S9, iPhone 8, iPhone 11, iPhone SE,
  • Samsung S22, Samsung S21, Samsung S20
• Qi-disabled devices with the wireless receivers or wireless charging case
  • (Require receiver compliant with WPC Qi standard to match).

Install Instructions

1. Insert the adjuster into the ball joint adapter
2. Insert the ball into the socket at the back of the bracket, and turn the adjuster to tighten.
3. Insert the hook into the car air outlet vane and tighten to lock. When you hear ‘clatter’ sounds, it means the mount has been fixed tightly.
4. Connect the charging cable to the charging interface, after power is on, the clamp arms will open automatically, the clamp arm can also be opened by pressing the button on both sides
5. Extend the foot support according to your phone size, to align the charging center of your smartphone
6. Place your device into the bracket, clamping armsof bracket will close automatically when it inducts the receiver coil of your device.

Attention:

1. Please use the product correctly according to the instructions.
2. Please do not disassemble the product or throw it to fire and water, to avoid leakage caused by an electrical short circuit.
3. Please do not use wireless chargers in high temperatures, wet, or corrosive environments, to avoid leakage caused by damaged circuit.
4. Please do not put wireless chargers close to cards with magnetic stripes or chips (ID card, credit card etc.) to avoid demagnetization
5. Please keep wireless charger at least 20 CM distance away from the implantable medical device (heart pacemaker, Implantable cochlea etc.) to avoid potential interferences.
6. Please do safekeeping, do not let your kids treat wireless chargers as toy to avoid unwanted accidents.
   The pictures only supply the reference, please take the actual product as the standard.

FCC Statement

FCC ID: 2BDOG-TAC-138
FCC WARNING:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>