TRIBIT StormBox Blast 2 Wireless Party Speaker User Manual

TRIBIT StormBox Blast 2 Wireless Party Speaker

Specifications:

• Model: XYZ-2000
• Dimensions: 10 x 5 x 3 inches
• Weight: 2 lbs
• Power Input: 120V, 60Hz
• Max Temperature: 400°F

Product Information

The XYZ-2000 is a versatile household appliance designed to make cooking convenient and efficient. With a sleek design and powerful performance, this product is perfect for everyday use in the kitchen. Whether you’re baking, roasting, or toasting, the XYZ-2000 has you covered.

Usage Instructions

Initial Setup:
Before using the XYZ-2000 for the first time, carefully unpack the product and remove all packaging materials. Place the appliance on a flat, stable surface close to a power outlet.

Preheating:
Turn the temperature dial to your desired setting and allow the XYZ-2000 to preheat. A light indicator will signal when the appliance has reached the set temperature.

Cooking:
Place your food items inside the appliance, ensuring they are positioned evenly for even cooking. Close the lid securely to trap heat and cook your meals thoroughly.

Cleaning and Maintenance:
After each use, make sure to unplug the appliance and allow it to cool down before cleaning. Use a damp cloth with mild detergent to wipe the interior and exterior surfaces. Do not immerse the appliance in water.

FAQ:

• Q: Can I use the XYZ-2000 to bake cakes?
  A: Yes, the XYZ-2000 is suitable for baking cakes, cookies, and other baked goods. Make sure to adjust the temperature and cooking time according to your recipe.

• Q: Is it safe to use the XYZ-2000 unattended?
  A: It is recommended to never leave the appliance unattended while in use. Always monitor your cooking progress to prevent any accidents.

WHAT IN BOX

To Charging The Speaker

Note : If charging with Type-C, it will take about 72 hours to fully charge.

Power On/Off

• Short press the power button to turn on/off.
• When there is no audio input or any operation, the speakers will automatically turn off after 30 minutes.
• When the speaker cannot work normally due to unknown reasons, long press the power button for 8S to achieve forced shutdown and then restart the speaker.

Pairing

• Short press the Bluetooth button once to enter pairing mode.
• Long press the Bluetooth button 2S to disconnect the Bluetooth connection.
• The speaker can be connected to up to two Bluetooth devices at the same time.
• Note : If both Bluetooth and the audio cable are connected, you can switch between them by pressing the Bluetooth button twice quickly.

Controls

• x1: Press once
• x2: Press twice
• x3: Press three times
• Reset: Press and hold the+- button at the same time for 5s

Controls

1. CD AC input charging port
2. Microphone volume control knob, turn left to reduce the volume, turn right to increase volume
3. Microphone reverb knob, turn left to reduce reverb, turn right to increase reverb
4. USB-C input charging port
5. USB-A output charging port, the speaker can charge other devices
6. 3.5mm AUX audio input port
7. 6.35mm Microphone input port

Stereo Mode

1. First connect Speaker A to your phone’s Bluetooth. then press the TWS button.
2. Make sure Speaker B is not connected to any device, then press the TWS button(if Speaker B is in Bluetooth pairing mode, there is no need to press the TWS button).
3. Both Speakers play sound at the same time, indicating that TWS is successful, speaker A is the left channel and speaker B is the right channel.

Party Mode

1. Two speakers already in stereo mode, press any speaker TWS button.
2. Hear the voice announcement, indicating the switch to Party Mode.
3. In Party Mode, speakers A and B will no longer play the left and right channels separately. Long press any speaker TWS button 2S to disconnect the TWS.

TRIBIT APP

Download the TRIBIT app to adjust the EQ settings, upgrade the firmware and exploremore features.

Safety Precautions

• Tighten the silicone plug at the charging port to avoid water ingress and damage.
• When charging, please keep the charging port and charging cable completely dry.
• Do not throw or place the product in a place where it can be easily dropped to avoid damage to the product due to dropping.
• Do not disassemble, repair or modify the product.
• The product has a built-in lithium battery, please do not dispose of it or put it in fire or overheating environment to avoid danger.
• Consumers charging with a power adapter should purchase a power adapter that meets the requirements of local standards.
• The warranty period is 12 months.

Specifications

• Bluetooth Version : V5.4
• Output Power : 200W(AC mode) lB0W(Battery mode)
• Bluetooth-Protokoll  A2DP,AVRCP
• Frequency Response Range :  40~20KHz
• Frequency Band Range : 2402-2480MHz
• Maximum Transmission Power : 59dBm
• Battery: 79.92Wh
• Play Time: Up to 30 hours (At 50% volume with XBass and Lights Off)
• Charging Time : About 5 hours(AC charging) About 72 hours(USB-C charging)
• Waterproofing Grade : IP67
• Size: 476.2 x 259.2 x 793.3mm
• Weight: 7750g

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 75 of the FCC Rules. These mits are designed to provide reasonable protection against harmful nterference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 75 of the FCC rules. Operation is subject to the following two conditions (7)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC Caution
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

• The power delivered by the charger must be between min 1.5 Watts required by the radio equipment, and max 8.5 Watts in order to achieve the maximum charging speed

SAR Information Statement

Your Wireless Party Speaker is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for Wireless Party Speaker employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the Wireless Party Speaker transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the Wireless Party Speaker while operating can be well below the maximum value. This is because the Wireless Party Speaker is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a Wireless Party Speaker model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this Wireless Party Speaker when worn on the body, as described in this user guide, is 0.15 W/Kg (Body- worn measurements differ among Wireless Party Speaker models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various Wireless Party Speaker and at various positions, they all meet the government requirement for safe exposure. The FCC has granted Equipment Authorization for this Wireless Party Speaker with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this Wireless Party Speaker is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: 2ALNA-BTS56 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. In the United States and Canada, the SAR limit for Wireless Party Speaker used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
The SAR test distance is 0mm.
Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Portable Wireless Speaker BTS56 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address:
//http:files.tribit.com/BTS56-eu-doc.pdf
verfugbar: //http:flles.tribit.com/BTS56-de- doc.pdf
Learn more about the UK Declaration of Conformity, Please click below link to download.
//http:files.tribit.com/BTS56-uk-doc.pdf

References

• CTIA - Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>