EATON N516-10M Duplex Multimode 50 125 Fiber Patch Cable Owner’s Manual

: August 17, 2024
: EATON

Table of Contents

EATON N516-10M Duplex Multimode 50 125 Fiber Patch Cable
Product Usage Instructions
FAQ
Features
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EATON N516-10M Duplex Multimode 50 125 Fiber Patch Cable

Product Usage Instructions

Connecting the Cable

Identify the LC connector end (Side A) and SC connector end (Side B) of the cable.
Connect the LC connector to the corresponding port on your Fiber Optic hardware or NIC card.
Connect the SC connector to the appropriate port on the other device.

Handling and Care

Handle the cable carefully to avoid bending it beyond the minimum radius specified. Store the cable in a cool, dry place away from direct sunlight.

Maintenance

Regularly inspect the connectors for any dirt or damage. Clean the connectors with a lint-free cloth and approved cleaning solution if necessary.

FAQ

Q: Is this cable compatible with Gigabit networks?

A: Yes, this cable is optimized for Gigabit and 10Gbps networks.

Q: Can this cable be used with 62.5 micron fiber systems?

A: Yes, this cable is backward compatible with 62.5 micron fiber.

Q: What is the warranty period for this product?

A: This product comes with a lifetime limited warranty.

Duplex Multimode 50/125 Fiber Patch Cable (LC/SC), 10M (33 ft.)

MODEL NUMBER: N516-10M

Features

Constructed with 50/125 micron cable
Length – 10M
Use on fiber and fibre channel installations
SC male to LC male connectors
Higher bandwidth optimized for gigabit and 10Gbps networks
Backward compatible with 62.5 micron fiber
Built-in headroom for future applications
Number of fibers: 2
Fiber type: all glass graded index
Core diameter: two 50+/-3 microns
CLAD diameter: 125+/-2 microns
Primary coating diameter: 245+/-15 microns
Primary coating material: acrylate
Secondary coating diameter: 900+/-50 microns
Secondary coating material: PVC
Attenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximum
Bandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimum
Numeric aperture: .275 nominal
Proof test level: 100,000 PSI
Insertion loss testing performed on every connector (0.2db typical) and provided with cable
Beveled edge on ends of glass makes insertion of plug a breeze

Highlights

Premium PVC 50/125 multimode patch cables
Attenuation loss meets or exceeds the latest industry standards
Higher Bandwidth, optimized for Gigabit and 10Gbps networks
Backward compatible with 62.5 micron fiber
Built-in headroom for future applications\

System Requirements

Any Fiber Optic hardware or NIC card requiring Multimode Duplex cable with LC/SC connectors

Package Includes

10M Duplex MMF Cable LC/SC 50/125 Fiber

Specifications

OVERVIEW

CONNECTIONS

Side A – Connector 1| LC DUPLEX (MALE)
Side B – Connector 1| SC DUPLEX (MALE)
Endface Polish| PC

PHYSICAL

900

ENVIRONMENTAL

Operating Temperature Range| -4° to 140°F (-20° to 60°C)
Storage Temperature Range| -4° to 140°F (-20° to 60°C)
Operating Humidity Range| 5% to 85% RH, Non-Condensing
Storage Humidity Range| 35% to 65% RH, Non-Condensing

COMMUNICATIONS

Network Compatibility| 1 Gbps (Gigabit); 10 Gbps; 25 Gbps
Attenuation @ 850NM| 3.0 dB/km
Insertion Loss| LC 0.20 dB; SC 0.20 dB

FEATURES & SPECIFICATIONS

Push/Pull Tabs| No
Breakout| No
Trunk| No

STANDARDS & COMPLIANCE

Product Compliance| RoHS; REACH

WARRANTY & SUPPORT

Product Warranty Period (Worldwide)| ****

Lifetime limited warranty

1000 Eaton Boulevard Cleveland, OH 44122 United States
https://tripplite.eaton.com

© 2024 Eaton. All Rights Reserved.
Eaton is a registered trademark. All other trademarks are the property of their respective owners.