ECCO EC100 Connect Kit Installation Guide
- August 17, 2024
- ECCO
Table of Contents
ECCO EC100 Connect Kit
Specifications
- Input Voltage: 12VDC
- Input Current: Varies based on hardware selected
- Temp. Range:
Product Information
The ECCO Connect Kit EC100 is a safety product designed to provide emergency warning signals for vehicles. It consists of core products like SWITCHNODE- EC100 and optional products for customization.
Product Usage Instructions
Installation
- Install the SIB, SWITCHNODE, and EZ0000 controller inside the cab on a flat surface that is safe from moisture. Follow provided instructions for mounting each product.
- Mount the exterior lighting directionals in the desired locations of the vehicle. Note: Drill a 1″ hole for the wire exit of the directional.
Operation
- Ensure proper grounding of the product to prevent high current arcing.
- Regularly check that all features of the product work correctly.
- Avoid blocking the warning signal projection with vehicle components or obstructions.
- Obey all laws regarding emergency warning devices when using this equipment.
Frequently Asked Questions (FAQ)
-
Q: What should I do if the warning signal projection is blocked?
A: Ensure that no vehicle components or obstructions are blocking the warning signal. Clear any obstacles that may hinder the visibility of the signal. -
Q: How can I ensure the proper functioning of the product?
A: Regularly check that all features of the product are working correctly and that the installation is secure and free from moisture.
Installation and Operation Instructions
ECCO Connect Kit EC100
IMPORTANT! Read all instructions before installing and using. Installer: This manual must be delivered to the end user.
WARNING!
Failure to install or use this product according to manufacturer’s
recommendations may result in property damage, serious injury, and/or death to
those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understood the safety information contained in this manual.
- Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure the safety of emergency personnel and the public.
- Emergency warning devices often require high electrical voltages and/or currents. Exercise caution when working with live electrical connections.
- This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
- Proper placement and installation is vital to the performance of this warning device. Install this product so that output performance of the system is maximized and the controls are placed within convenient reach of the operator so that they can operate the system without losing eye contact with the roadway.
- Do not install this product or route any wires in the deployment area of an air bag. Equipment mounted or located in an air bag deployment area may reduce the effectiveness of the air bag or become a projectile that could cause serious personal injury or death. Refer to the vehicle owner’s manual for the air bag deployment area. It is the responsibility of the user/operator to determine a suitable mounting location ensuring the safety of all passengers inside the vehicle particularly avoiding areas of potential head impact.
- It is the responsibility of the vehicle operator to ensure daily that all features of this product work correctly. In use, the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people, vehicles or other obstructions.
- The use of this or any other warning device does not ensure all drivers can or will observe or react to an emergency warning signal. Never take the right-of-way for granted. It is the vehicle operator’s responsibility to be sure they can proceed safely before entering an intersection, drive against traffic, respond at a high rate of speed, or walk on or around traffic lanes.
- This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding emergency warning devices. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.
Specifications
- Input Voltage: 12VDC
- Input Current:
- Varies based on hardware selected
- Temp. Range:
- -40ºC to 65ºC
- -40ºF to 149ºF
Kit Contents
Installation and Mounting
- Install the SIB, SWITCHNODE, and EZ0000 controller inside the cab on a flat surface that is safe from moisture. Follow provided instructions for mounting each product.
- Mount the exterior lighting directionals in the desired locations of the vehicle. Note: Drill a 1” hole for the wire exit of the directional.
Wiring Instructions
- Use 8 AWG Ring Terminal and 8 AWG wire connect the Switch node positive terminal to +12V or +24V.
- Use 10-12 AWG Ring Terminal and 10 AWG wire connect the Switch node negative terminal to ground.
- Connect the EZ0000 power and input connectors into the SIB. Connect the two red wires to +12V or +24V and black to ground.
- Connect the Switchnode to Serial Interface Box by plugging the CAN 690-0499-00 and 690-1051-00.
- Route Cables from the Switch node to each directional. Connect deutsch connections.
- Connect the Switchnode Junction Harness according to image below.
List of primary/secondary colors by product:
Products can be placed in different locations. Please use the guidance below to connect each product back to the correct Switchnode output.
Two different cables options are available. Route the cables below using the guidance provided below:
Warranty
Manufacturer Limited Warranty and Limitation of Liability:
Manufacturer warrants that on the date of purchase, this product will conform
to Manufacturer’s specifications for this product (which are available from
the Manufacturer upon request). This Limited Warranty extends for sixty (60)
months from the date of purchase.
DAMAGE TO PARTS OR PRODUCTS RESULTING FROM TAMPERING, ACCIDENT, ABUSE, MISUSE,
NEGLIGENCE, UNAPPROVED MODIFICATIONS, FIRE OR OTHER HAZARD; IMPROPER
INSTALLATION OR OPERATION; OR NOT BEING MAINTAINED IN ACCORDANCE WITH THE
MAINTENANCE PROCEDURES SET FORTH IN MANUFACTURER’S INSTALLATION AND OPERATING
INSTRUCTIONS VOIDS THIS LIMITED WARRANTY.
Exclusion of Other Warranties:
MANUFACTURER MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED. THE IMPLIED
WARRANTIES FOR MERCHANTABILITY, QUALITY OR FITNESS FOR A PARTICULAR PURPOSE,
OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE ARE HEREBY
EXCLUDED AND SHALL NOT APPLY TO THE PRODUCT AND ARE HEREBY DISCLAIMED, EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ORAL STATEMENTS OR REPRESENTATIONS
ABOUT THE PRODUCT DO NOT CONSTITUTE WARRANTIES.
Remedies and Limitation of Liability:
MANUFACTURER’S SOLE LIABILITY AND BUYER’S EXCLUSIVE REMEDY IN CONTRACT, TORT
(INCLUDING NEGLIGENCE), OR UNDER ANY OTHER THEORY AGAINST MANUFACTURER
REGARDING THE PRODUCT AND ITS USE SHALL BE, AT MANUFACTURER’S DISCRETION,
THE REPLACEMENT OR REPAIR OF THE PRODUCT, OR THE REFUND OF THE PURCHASE PRICE
PAID BY BUYER FOR NON-CONFORMING PRODUCT. IN NO EVENT SHALL MANUFACTURER’S
LIABILITY ARISING OUT OF THIS LIMITED WARRANTY OR ANY OTHER CLAIM RELATED TO
THE MANUFACTURER’S PRODUCTS EXCEED THE AMOUNT PAID FOR THE PRODUCT BY BUYER AT
THE TIME OF THE ORIGINAL PURCHASE. IN NO EVENT SHALL MANUFACTURER BE LIABLE
FOR LOST PROFITS, THE COST OF SUBSTITUTE EQUIPMENT OR LABOR, PROPERTY DAMAGE,
OR OTHER SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES BASED UPON ANY CLAIM
FOR BREACH OF CONTRACT, IMPROPER INSTALLATION, NEGLIGENCE, OR OTHER CLAIM,
EVEN IF MANUFACTURER OR A MANUFACTURER’S REPRESENTATIVE HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. MANUFACTURER SHALL HAVE NO FURTHER OBLIGATION
OR LIABILITY WITH RESPECT TO THE PRODUCT OR ITS SALE, OPERATION AND USE, AND
MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES THE ASSUMPTION OF ANY OTHER
OBLIGATION OR LIABILITY IN CONNECTION WITH SUCH PRODUCT.
This Limited Warranty defines specific legal rights. You may have other legal
rights which vary from jurisdiction to jurisdiction. Some jurisdictions do not
allow the exclusion or limitation of incidental or consequential damages.
833 West Diamond St, Boise, Idaho 83705
Customer Service USA 800-635-5900
UK +44 (0)113 237 5340 | AUS +61 (0)3 63322444
ECCOESG.com
An ECCO SAFETY GROUP™ Brand
ECCOSAFETYGROUP.com
© 2024 ECCO, Inc. All rights reserved.
920-1134-00 Rev. A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>