ECCO ED3794 Flexible Directional Instruction Manual

ECCO ED3794 Flexible Directional

Safety

WARNING!
Failure to install or use this product according to manufacturer’s recommendations may result in property damage, serious injury, and/or death to those you are seeking to protect!

Do not install and/or operate this safety product unless you have read and understood the safety information contained in this manual.

1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure the safety of emergency personnel and the public.
2. Emergency warning devices often require high electrical voltages and/or currents. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation is vital to the performance of this warning device. Install this product so that output performance of the system is maximized and the controls are placed within convenient reach of the operator so that they can operate the system without losing eye contact with the roadway.
5. Do not install this product or route any wires in the deployment area of an air bag. Equipment mounted or located in an airbag deployment area may reduce the effectiveness of the air bag or become a projectile that could cause serious personal injury or death. Refer to the vehicle owner’s manual for the air bag deployment area. It is the responsibility of the user/operator to determine a suitable mounting location ensuring the safety of all passengers inside the vehicle particularly avoiding areas of potential head impact.
6. It is the responsibility of the vehicle operator to ensure daily that all features of this product work correctly. In use, the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people, vehicles or other obstructions.
7. The use of this or any other warning device does not ensure all drivers can or will observe or react to an emergency warning signal. Never take the right-of-way for granted. It is the vehicle operator’s responsibility to be sure they can proceed safely before entering an intersection, drive against traffic, respond at a high rate of speed, or walk on or around traffic lanes.
8. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding emergency warning devices. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.

Important! This unit is a safety device and it must be connected to its own separate, fused power point to assure its continued operation should any other electrical accessory fail.
Caution : When drilling into any vehicle surface, make sure the area is free from any electrical wires, fuel lines, vehicle upholstery, etc. that could be damaged.
Caution :
– light cannot be twisted or pulled
– do not bend in the lens direction
– Mounts to a surface curvature with a minimum radius of 3 inches.

CONTENTS

SPECIFICATIONS

0.5A Max @ 24VDC
Physical H x W x L| 3.9 in x 0.9 in x 0.4 in
9.9 cm x 2.3 cm x 1 cm
Ship Weight| 0.1 lb (0.05 Kg)

Mounting

Mounting on a curved surface :

1. Mark hole location using gasket as a template and drill hole for wire exit using 11/32 in. drill bit.
2. Wipe surface clean with alcohol wipe. Wait until dry.
3. Mount light using VHB adhesive. Peel adhesive backing and apply pressure to adhere to surface for 20 seconds. It is recommended to allow 24 hours for adhesive to fully adhere before powering on light.

• Do not use hardware, gasket or bezel when mounting on curved surface.
• Max surface curvature 120°.

Mounting on flat surface :

1. Mark wire and screw locations using gasket as a template. Drill wire exit hole using 11/32 in. drill bit. Pre-drill screw holes using 3/64 in. drill bit.
2. Peel VHB backing and apply light to surface, aligning screw holes and wire exit. Apply pressure for 20 seconds. Insert screws through bezel to finish mounting lighthead. It is recommended to allow 24 hours for adhesive to fully adhere before powering on light.

*For extra adhesion, use 3M Tape Primer. For product & application information, go to: https://multimedia.3m.com/mws/media/65952O/3mtm-tape-primer-94.pdf

Wire

RED : Positive, Colors 1 & 3 (need to add 5A fuse)
WHITE : Positive, Colors 2 & 4 (need to add 5A fuse)
RED & WHITE: Positive (Colors 1 & 3) & (Colors 2 & 4)
BLACK : Negative
BLUE : Pattern select to negative
YELLOW : Synchronized Function (Up to 8 units can be Synchronized)

Operation Environment

Ambient Temperature: -30 to 50°C (-22° F to 122°F

Phase Operation :
Phase 1 (Ph1) flashes simultaneously with Ph1
Phase 2 (Ph2) flashes simultaneously with Ph2
Ph1 alternates with Ph2
(Up to 8 units can be Synchronized)
Apply BLUE TO BLACK wire :
-Less than 1 sec. for next pattern
-Between 1-3 sec for previous pattern
-Between 3-5 sec. for factory default
-More than 5 sec. for last pattern

ED3794 DUAL COLOR FLASH PATTERN CHART

Pattern| LED Color 1 & Color 3 Red line| LED Color 2 & Color 4 White line| LED Color 1 & Color 3
LED Color 2 & Color 4 Red & White line| PATTERNS| Mark SYNC.| SAE J595| CA T13| ECE R65
---|---|---|---|---|---|---|---|---
RED| AMBER| BLUE| WHITE| RED| AMBER| BLUE| RED| AMBER| BLUE
1| 1-Default| | 1| SAE/T13 SAE/T13 Single 75FPM Ph1 Color 1 Synchronous Color 3| A| yes| Class 1| Class 1| Class 1| Class 1| Class B| Class B| Class B| N/C| N/C| N/C
2| | 2| SAE/T13 SAE/T13 Single 75FPM Ph2 Color 1 Synchronous Color 3| yes| Class 1| Class 1| Class 1| Class 1| Class B| Class B| Class B| N/C| N/C| N/C
| | 3| SAE/T13 Single 75FPM Ph1 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| | 4| SAE/T13 Single 75FPM Ph2 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 1-Default| 5| SAE/T13 Single 75FPM Ph1 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 1| Class B| Class B| Class B| N/C| N/C| N/C
| 2| 6| SAE/T13 Single 75FPM Ph2 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 1| Class B| Class B| Class B| N/C| N/C| N/C
3| 3| 7| SAE/T13 Single 38FPM Ph1(Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| E| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
4| 4| 8| SAE/T13 Single 38FPM Ph2(Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
5| 5| 9| SAE/T13 Single 38FPM (Color 1 Alternately Color 2) Alternately (Color 3 Alternately Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
2| 6| | 10| Single 375FPMFPM Ph1 Color 1 Synchronous Color 3| D| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
7| | 11| Single 375FPMFPM Ph2 Color 1 Synchronous Color 3| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| | 12| Single 375FPMFPM Ph1 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| | 13| Single 375FPMFPM Ph2 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 6| 14| Single 375FPMFPM Ph1 Color 2 Synchronous Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 7| 15| Single 375FPMFPM Ph2 Color 2 Synchronous Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
8| 8| 16| Single 187FPMFPM Ph1 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| H| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
9| 9| 17| Single 187FPMFPM Ph2 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
10| 10| 18| Single 187FPMFPM (Color 1 Alternately Color 2) Alternately (Color 3 Alternately Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
3| 11| | 19| SAE/T13 Double 75FPM Ph1 Color 1 Synchronous Color 3| A| yes| Class 1| Class 1| Class 1| Class 1| N/C| N/C| N/C| N/C| N/C| N/C
12| | 20| SAE/T13 Double 75FPM Ph2 Color 1 Synchronous Color 3| yes| Class 1| Class 1| Class 1| Class 1| N/C| N/C| N/C| N/C| N/C| N/C
| | 21| SAE/T13 Double 75FPM Ph1 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| | 22| SAE/T13 Double 75FPM Ph2 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 11| 23| SAE/T13 Double 75FPM Ph1 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 1| N/C| N/C| N/C| N/C| N/C| N/C
| 12| 24| SAE/T13 Double 75FPM Ph2 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 1| N/C| N/C| N/C| N/C| N/C| N/C
13| 13| 25| SAE/T13 Double 38FPM Ph1 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| E| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
14| 14| 26| SAE/T13 Double 38FPM Ph2 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
15| 15| 27| SAE/T13 Double 38FPM (Color 1 Alternately Color 2) Alternately (Color 3 Alternately Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
4| 16| | 28| ECER65/SAE Double 120FPM Ph1 Color 1 Synchronous Color 3| B| yes| Class 1| Class 1| Class 1| Class 1| N/C| N/C| N/C| Class 1| Class 1| Class 1
17| | 29| ECER65/SAE Double 120FPM Ph2 Color 1 Synchronous Color 3| yes| Class 1| Class 1| Class 1| Class 1| N/C| N/C| N/C| Class 1| Class 1| Class 1
| | 30| ECER65/SAE Double 120FPM Ph1 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| | 31| ECER65/SAE Double 120FPM Ph2 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 16| 32| ECER65/SAE Double 120FPM Ph1 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 1| N/C| N/C| N/C| Class 1| Class 1| Class 1
| 17| 33| ECER65/SAE Double 120FPM Ph2 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 1| N/C| N/C| N/C| Class 1| Class 1| Class 1
18| 18| 34| ECER65/SAE Double 60FPM Ph1 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| F| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
19| 19| 35| ECER65/SAE Double 60FPM Ph2 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
20| 20| 36| ECER65/SAE Double 60FPM (Color 1 Alternately Color 2) Alternately (Color 3 Alternately Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
5| 21| | 37| SAE/T13 Triple 75FPM Ph1 Color 1 Synchronous Color 3| A| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
22| | 38| SAE/T13 Triple 75FPM Ph2 Color 1 Synchronous Color 3| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
| | 39| SAE/T13 Triple 75FPM Ph1 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| | 40| SAE/T13 Triple 75FPM Ph2 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 21| 41| SAE/T13 Triple 75FPM Ph1 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
| 22| 42| SAE/T13 Triple 75FPM Ph2 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
23| 23| 43| SAE/T13 Triple 38FPM Ph1 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| E| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
24| 24| 44| SAE/T13 Triple 38FPM Ph2 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
25| 25| 45| SAE/T13 Triple 38FPM (Color 1 Alternately Color 2) Alternately (Color 3 Alternately Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
6| 26| | 46| SAE/T13 Quad 75FPM Ph1 Color 1 Synchronous Color 3| A| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
27| | 47| SAE/T13 Quad 75FPM Ph2 Color 1 Synchronous Color 3| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
| | 48| SAE/T13 Quad 75FPM Ph1 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| | 49| SAE/T13 Quad 75FPM Ph2 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 26| 50| SAE/T13 Quad 75FPM Ph1 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
| 27| 51| SAE/T13 Quad 75FPM Ph2 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
28| 28| 52-Default| SAE/T13 Quad 38FPM Ph1 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| E| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
29| 29| 53| SAE/T13 Quad 38FPM Ph2 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
30| 30| 54| SAE/T13 Quad 38FPM (Color 1 Alternately Color 2) Alternately (Color 3 Alternately Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
7| 31| | 55| ECER65/SAE Quad 120FPM Ph1 Color 1 Synchronous Color 3| B| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
32| | 56| ECER65/SAE Quad 120FPM Ph2 Color 1 Synchronous Color 3| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
| | 57| ECER65/SAE Quad 60FPM Ph1 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| | 58| ECER65/SAE Quad 120FPM Ph2 Color 1 Alternately Color 4| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 31| 59| ECER65/SAE Quad 120FPM Ph1 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
| 32| 60| ECER65/SAE Quad 120FPM Ph2 Color 2 Synchronous Color 4| yes| Class 1| Class 1| Class 1| Class 2| N/C| N/C| N/C| N/C| N/C| N/C
33| 33| 61| ECER65/SAE Quad 60FPM Ph1 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| F| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
34| 34| 62| ECER65/SAE Quad 60FPM Ph2 (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
35| 35| 63| ECER65/SAE Quad 60FPM (Color 1 Alternately Color 2) Alternately (Color 3 Alternately Color 4)| yes| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
8| | | 64| Modulation (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| N/A| no| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
9| | | 65| 2 Double,2 Quad (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| no| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
10| | | 66| 4 Single,2 Triple (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| no| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
11| | | 67| 1Doube 1Triple 1Quad (Color 1 Synchronous Color 3) Alternately (Color 2 Synchronous Color 4)| no| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
12| 36| | 68| Steady burn-Color 1 & 3| no| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C
| 36| 69| Steady burn-Color 2 & 4| no| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C| N/C

Manufacturer Limited Warranty and Limitation of Liability

Manufacturer warrants that on the date of purchase, this product will conform to Manufacturer’s specifications for this product (which are available from the Manufacturer upon request). This Limited Warranty extends for Thirty-six (36) months from the date of purchase.
DAMAGE TO PARTS OR PRODUCTS RESULTING FROM TAMPERING, ACCIDENT, ABUSE, MISUSE, NEGLIGENCE, UNAPPROVED MODIFICATIONS, FIRE OR OTHER HAZARD; IMPROPER INSTALLATION OR OPERATION; OR NOT BEING MAINTAINED IN ACCORDANCE WITH THE MAINTENANCE PROCEDURES SET FORTH IN MANUFACTURER’S INSTALLATION AND OPERATING INSTRUCTIONS VOIDS THIS LIMITED WARRANTY. Exclusion of Other Warranties:
MANUFACTURER MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED. THE IMPLIED WARRANTIES FOR MERCHANTABILITY, QUALITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE ARE HEREBY EXCLUDED AND SHALL NOT APPLY TO THE PRODUCT AND ARE HEREBY DISCLAIMED, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ORAL STATEMENTS OR REPRESENTATIONS ABOUT THE PRODUCT DO NOT CONSTITUTE WARRANTIES.
Remedies and Limitation of Liability:
MANUFACTURER’S SOLE LIABILITY AND BUYER’S EXCLUSIVE REMEDY IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR UNDER ANY OTHER THEORY AGAINST MANUFACTURER REGARDING THE PRODUCT AND ITS USE SHALL BE, AT MANUFACTURER’S DISCRETION, THE REPLACEMENT OR REPAIR OF THE PRODUCT, OR THE REFUND OF THE PURCHASE PRICE PAID BY BUYER FOR NON-CONFORMING PRODUCT. IN NO EVENT SHALL THE MANUFACTURER’S LIABILITY ARISING OUT OF THIS LIMITED WARRANTY OR ANY OTHER CLAIM RELATED TO THE MANUFACTURER’S PRODUCTS EXCEED THE AMOUNT PAID FOR THE PRODUCT BY BUYER AT THE TIME OF THE ORIGINAL PURCHASE. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR LOST PROFITS, THE COST OF SUBSTITUTE EQUIPMENT OR LABOR, PROPERTY DAMAGE, OR OTHER SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES BASED UPON ANY CLAIM FOR BREACH OF CONTRACT, IMPROPER INSTALLATION, NEGLIGENCE, OR OTHER CLAIM, EVEN IF MANUFACTURER OR A MANUFACTURER’S REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. MANUFACTURER SHALL HAVE NO FURTHER OBLIGATION OR LIABILITY WITH RESPECT TO THE PRODUCT OR ITS SALE, OPERATION AND USE, AND MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES THE ASSUMPTION OF ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SUCH PRODUCT.
This Limited Warranty defines specific legal rights. You may have other legal rights which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages.

Customer Support

833 West Diamond St, Boise, Idaho 83705
Customer Service USA 800-635-5900
UK +44 (0)113 237 5340 | AUS +61 (0)3 63322444
ECCOESG.com

References

• Home - ECCO
• Home - ECCO Safety Group

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>