MeTra SPY-MNBLT3WIP8 4K Color Night Vision IP Camera User Guide
- June 3, 2024
- Metra
Table of Contents
MeTra SPY-MNBLT3WIP8 4K Color Night Vision IP Camera
Statement
Thank you for using our products, please read this manual carefully before trying. This manual is applicable to network series products. This manual may contain information that is technically inaccurate, inconsistent in the product~ function and operation, or in a typographical error. Our company will update the context in the manual according to the enhancement of product features. Updated content will be added in the new version of this manual without further notice.
-
This equipment should be installed in a well-ventilated environment. Please keep proper space with the ground during installation.
This product can not withstand heavy loads. Do not place heavy objects or multi-layer overlays on this product. -
Power must be under safety certification, Its output voltage, curren~ voltage polarity and operating temperature must comply with the
-
power requirements of this equipment. When using this equipment in thunder and lightning conditions. please pay attention to install lightning protection device or cut off
-
the power.
-
In order to get high-quality video and pictures, make sure your internet connection is stable and smooth.
Network Settings
The IPv4 address of the PC needs to be in the same network segment as the IP
address of the IP camera to allow the connection. (Note: The default IP
address of the IP Camera: is 192.168.1.168.) Specific settings in the window
system can refer to the following methods:
Method one:
@Check the IPv4 address of the PC, click [Start] / [Control Panell / [Network
and Internet] / [Network and Sharing Center] / [Local Network] / [Details].
Set the PC IPv4 address(E.g PC:192.168.1.165)
Or add PC and network cameras in the same network segment (E.g:192.168.1.165).
Note: The 1Pv4 address can not use an existing IP of another device when
you add in LAN.
Method Two:
Use the IP search tool, changing searched IP camera to the same network
segment as the PCs. (Note: Default IP address of the IP Camera: 192.168.1.168.
Default Username: admin. default password: admin; the changed URL can not
conflict with the IP address of other devices in the LAN).
Ping devise address
-
Connect the camera and PC by network cable in the same LAN, and power it on. Connecting as following (PoE switch, camera, PC connection photo).
-
Left click: window [Start l menu, Input ‘cmd” in [Program/ file searcher] to open window command(or you can press shortcut ‘win+R” directly on the keyboard to input “cmd’), from the Cursorvblinking side, input ‘Ping … … …. and press ‘Enter’ (For example, when the camera I dress is 192.168.1.168, then input
‘ping 192.168.1.168’ and press ‘Enter’) to check the system connection, on the information. For example as in the below photo, when system connection information is data package: sent=4. received=4, loss=O, <0% loss> means PC and camera signal communication is normal you can log in to the camera by IE Internet Explorer) web browser. -
3. Connection and login
Please download and install the OCX plugin the first time you connect to the camera, open the I IP Search I tool and click: [Search], double click: the camera you need to connect. webpage of login will come out. then click: [Download] to download the OCX plugin and
install it. After installation, please cl refresh IE and input the user and password (Default Factory setting user is admin. default password is admin. we strongly suggest you change the user and password to a higher safety level), details are shown in the following photos: -
Real-time preview and parameter configuration
Enter the user name and password of the device in the browser user interface and enter the real-time preview interface.
Click [Configuratiool to enter the device and other functions, including local configuration, system, and local network. video, image, and event configuration. Users.; can selectively set these features to achieve better performance based on the actual situation of the application scenario.
Drill Template
- Hole A: for cables routed through the ceiling Hole
- B: for cables routed through the side opening Screw
- hole 1: for Mount I ng Base
Record in 4K resolution with a small but powerful IP camera that captures video up to 8MP at 30 fps, for a crisp, clear picture, even in low light or dark conditions. The advanced CMOS sensor has the latest technology to provide color night vision with superior picture quality and better clarity in low light. For completely dark environments, smart IR LEDs can see objects up to 25 meters away at night and automatically adjust the IR LED brightness to avoid a washed-out image. A built-in microphone records audio and the camera’s H.265+ video compression reduces bandwidth and video storage demands without sacrificing the video quality.
- Choose color night vision or smart IR LEDs setting based on the environment
- Color night vision:
- Uses the latest technology for low-light conditions
- Works best with an existing ambient light source and areas with streetlights
- Must be enabled through the camera’s configuration menu
- Smart IR LEDs:
- Automatically adjusts the IR LEDs for night vision up to 25 meters
- Prevents images from appearing washed out if too close to the IR LEDs
- Works best for completely dark environments with no ambient light source
- Supports 1080p/30, 4MP/30, 6MP/30, & BMP/30 resolutions
- Water-resistant, rated IP67
- Supports H.264, H.264+, H.265 & H.265+
- Built-in microphone
- Built-in PoE
- WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
IMPORTANT!! Please fill out this warranty card to register your new.
-
THE INTEGRATER5 EHDiEE
-
386.255.0234
Documents / Resources
|
MeTra SPY-MNBLT3WIP8 4K Color Night Vision IP
Camera
[pdf] User Guide
SPY-MNBLT3WIP8 4K Color Night Vision IP Camera, SPY-MNBLT3WIP8, 4K Color Night
Vision IP Camera, Night Vision IP Camera, IP Camera, Camera
---|---